Bambu Lab

Rethink Personal Manufacturing. #bambuletsmakeit

[Bambu Lab @BambulabGlobal]

Bambu Lab R1, the CO₂ laser built with the same motion control as our printers.

Every cut lands where it should.

The specs you've been asked about:
• 55W CO₂ Laser - cuts up to 20mm single-pass cutting
• 600 × 300 mm bed, 3m throughput with conveyor
• 1000 mm/s max speed without losing detail
• Auto laser alignment, first for a CO₂ laser cutter
• Cameras, lasers and encoders work as one, within 0.2mm positioning accuracy

Big job. Light work.

Explore R1 https://t.co/1S13tO2TWj

[Bambu Lab @BambulabGlobal]

For US makers planning a bigger order this Black Friday: pay with PayPal on orders over $800 and a $25 coupon is yours. Mark your calendar for [Oct 27] — limited spots available, first come first served!

[Bambu Lab @BambulabGlobal]

Our best prices for Black Friday 2026 are almost here. 🖤

What's coming?
Printers up to $450 off, filaments up to 35% off and more deals across the stores! Starting Oct 27.

Subscribe to the Bambu Lab Official Store NOW to unlock these Official Store-exclusive benefits:

• $30 off printers for orders over $500 + $20 off accessories & filaments for orders over $150 (early access only, valid Oct 27 – Nov 1)

• A chance to win 1 of 28 H2C Combos (auto-entry for subscribers)

Subscribe now https://t.co/TSq1hpjCPv

Deals vary by region. See full details on your local store page.

[Bambu Lab @BambulabGlobal]

Give it a press… and watch it rise from the print bed. 👻

Our printers are in full Halloween mode. What is on your print bed for the spooky season?

[Bambu Lab @BambulabGlobal]

Officially parent approved 🏆

The Bambu Lab P2S is a 2026 National Parenting Product Awards (NAPPA) winner, and Bambu Lab is a 2026 Parents' Picks Awards winner in four categories, from elementary school through high school.

Both awards are judged by parents testing products with their own families. Thank you to every parent and kid who put our printers to the test! 👨‍👩‍👧

Read more at the link.

https://t.co/RtMCWzBDnN

[Bambu Lab @BambulabGlobal]

On the court, he's the ultimate playmaker, drawing up plays and solving every puzzle.

At home? Well, the challenges are entirely different. When his daughter came asking for the "perfect" birthday gift for her best friend, @CP3 didn't need a playbook. A quick scroll on MakerWorld, a few taps, and a dash of Bambu Lab magic later... problem solved.

Who knew the best assist of the day would happen right in the living room?

[Bambu Lab @BambulabGlobal]

The Bambu Lab S1 is now part of the prize pool for the Maker World "Make for Good: Accessibility Design Contest."

Full story & how to join https://t.co/fVah55IKnm

[Bambu Lab @BambulabGlobal]

Bambu Lab S1 | 3D Scanner

November 2026.

Create from your world. Start with a scan.

https://t.co/ESw405YuHg

#BambuLabS1 #3DScanning

[Bambu Lab @BambulabGlobal]

Pair the R1 with your 3D printer and you can make transparent acrylic art at home.

Thundercloud Lamp by Daniel4d
Layered Clock by Bambu Lab

https://t.co/rsLANvz1xR

[Bambu Lab @BambulabGlobal]

Pair the R1 with your 3D printer and you can make your own home decor.

Prairie Lamp by Makim
Sunflower Painting by miyabi

https://t.co/rsLANvz1xR

[Bambu Lab @BambulabGlobal]

Pair the R1 with your 3D printer and you can build a full play set at home.

PlayDeck by janberrydesign
Crystal Canyon Mine by Daniel4d

https://t.co/rsLANvz1xR

[Bambu Lab @BambulabGlobal]

Emma is one of our student ambassador. Over the summer, she took a Bambu Lab 3D printer into her local Boys & Girls Club this summer for the “Summer STEM Series.” Instead of sitting through lectures, the kids got their hands-on experience: they built mechanical fidget toys, played with print‑infill settings, and saw their ideas come to life layer by layer.

When engineering is fun and easy to try, curiosity just follows. We’re glad to see ambassadors like Emma giving back to the community and sparking the next generation of makers.

Read Emma's full story 👇

https://t.co/zacxLZjCio

[Bambu Lab @BambulabGlobal]

With positioning accuracy under 0.2mm, R1 finds small parts and printed outlines, then the laser engraves your design right on top or cuts exactly along the line.

https://t.co/rsLANvz1xR

[Bambu Lab @BambulabGlobal]

R1's Toolhead Camera and Distance Measurement Laser work together to keep engraving accurate on curved and transparent surfaces.

https://t.co/rsLANvzznp

[Bambu Lab @BambulabGlobal]

Aligning a laser used to mean test shots and a lot of guessing.

On R1, one sensor handles it. Mount it on the toolhead and the beam corrects itself in about a minute.

Precision without the wait.

https://t.co/rsLANvz1xR

[Bambu Lab @BambulabGlobal]

Getting a head start on Halloween.

Two Halloween-exclusive bundles have escaped the workshop:
🖤 PLA Basic Jade White & Black + Lamp Kit
🎃 PLA Basic Bambu Green & Pumpkin Orange + Candle Light Kit

More spooky deals hiding in the Lab -> https://t.co/taUrdM30Ou

[Bambu Lab @BambulabGlobal]

The PETG family just got a new member. 💚

Meet PETG Matte - Softer look, PETG-tough

8 vibrant colors. Pick yours
https://t.co/FaPxjHPycL

[Bambu Lab @BambulabGlobal]

That sinking feeling when your ring rolls into the sink drain.

Good news: someone already 3D printed a fix for that!

#BambuLab #3DPrinting #MakerWorld

[Bambu Lab @BambulabGlobal]

Most people watched the eclipse. Anil wanted to chase one from the edge of the sky.

He's the kind of person who assembled his own telescope, a "backpack observatory" he could haul out to darker skies, taught himself astronomy night after night, and once nearly discovered an asteroid on his own. No aerospace degree. No institution behind him. Just years of quietly getting good at things nobody asked him to learn.

From the outside, the Sunset Shadow Mission looks like any other high-altitude balloon flight: a capsule, a camera, a launch.

From the inside, it's various filaments, countless redesigns, and one maker who spent months refusing to let a single part go wrong.

For us, this was never only about a single flight. It was about betting on the people who care too much to stop, and making sure that care gets seen, whatever the sky decides.

Let's Make It Fund exists for people like him.

Thanks to Anil Monnier, Anthony Salsi, and the team who chased the sky with us.

You are a maker in your own way. Here's how Let's Make It Fund backs your next idea 👉 https://t.co/6oCoFZ6lwy

[Bambu Lab @BambulabGlobal]

BUILD YOUR R1 SETUP
The features in the video are unlocked with these add-ons, sold separately.

▸ Cut boards up to 3m - Conveyor + Riser Base
Automatic conveyour feeder: https://t.co/Idq8AmV4p5
Riser Base: https://t.co/ghk2BFp6dN

▸ Engrave cylinders & bottles - Rotary Attachment + Riser Base
Rotary Attachment: https://t.co/Cx4cdQBU3u
Riser Base: https://t.co/ghk2BFp6dN

▸ Cut thicker stock - Medium / Long Focus Lens
Reach R1's max cutting capacity: up to 18mm black walnut plywood. R1 ships with short-focus (15mm black walnut plywood / 20mm acrylic).
https://t.co/Nwu3OgGac7

▸ Cleaner air at the source - E1 Pro Air Purifier
https://t.co/dh2SdaGH1o

[Bambu Lab @BambulabGlobal]

Bambu Lab R1, the CO₂ laser built with the same motion control as our printers.

Every cut lands where it should.

The specs you've been asked about:
• 55W CO₂ Laser - cuts up to 20mm single-pass cutting
• 600 × 300 mm bed, 3m throughput with conveyor
• 1000 mm/s max speed without losing detail
• Auto laser alignment, first for a CO₂ laser cutter
• Cameras, lasers and encoders work as one, within 0.2mm positioning accuracy

Big job. Light work.

Explore R1 https://t.co/1S13tO2TWj

[Bambu Lab @BambulabGlobal]

Meet Bambu Lab R1. Big job. Light work.

Starting at $2,499

Pre-orders now open https://t.co/rsLANvz1xR