Specialized in commercial and residential plumbing, HVAC, boiler repair, hot-water and electrical controls, reactive and planned preventative maintenance
First line of gas safety in the plantroom is the gas solenoid. In case of emergency this must shut off the gas supply to prevent fires and explosion. Its regular check is part of the PPM and it is checked and tested during GSCs. - https://t.co/WNfzW8pXvT
Dosing pots are used for adding chemicals to the system. Most of the cases it is anti corrosion inhibitor injected. To maintain the needed level of inhibitor in a system is one of the fundamental points for a heating system's failsafe operation. Inhibitor levels are always
The speed and switchover settings of twin pumps must be set up correctly to achieve the optimal circulation, heat distribution and for the longest lifespan possible. These are checked and adjusted if needed during ppm visits. - https://t.co/xUrQYiV1BA
Leak marks on a pump are indication of a leaking shaft seal. If replaced in time it is a quick and rather cheap fix. If left this way it will damage the shaft and will cause much higher repair costs. - https://t.co/JbLNQ868Tr