National Centre for Additive Manufacturing

The National Centre for AM (NCAM), based at the MTC, accelerates the adoption of AM by developing the technology and systems required to industrialise AM.

[National Centre for Additive Manufacturing @CentreAdditive]

We’re addressing key challenges faced by conventional design & #manufacture of electric motors by redesigning a typical casing by implementing liquid cooling channels allowing the motor to produce more power: https://t.co/EgxDUfE9Qm

#AdditiveManufacturing #3Dprinting

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for #AdditiveManufacturing is home to the European #Space Agency AM Benchmarking Centre (AMBC).

Discover more here: https://t.co/nPJnmXuwyo

[National Centre for Additive Manufacturing @CentreAdditive]

Our TRUMPF 3000 will be part of a benchmarking study to test the latest high performance aluminium alloys in LPBF. This will be part of our work as the ESA AM Benchmarking Centre.

Contact us at [email protected] for more info

#AdditiveManufacturing #Engineering #Manufacturing

[National Centre for Additive Manufacturing @CentreAdditive]

We are utilising our @AddUp_solutions FormUp 350 machine, to build our maraging steel capability. We're also investigating the very low angles of unsupported parts that can be achieved through the Formup 350.

For more information, email us at: [email protected]

#3DPrinting

[National Centre for Additive Manufacturing @CentreAdditive]

We are putting our Digital Metal DMP2500 through its paces, exploring possible applications in Aerospace, Automotive, Medical and Defence to name a few.

For more info on our Bind & Sinter AM capabilities email us at [email protected]

#AdditiveManufacturing #3Dprinting

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for AM is home to the European Space Agency AM Benchmarking Centre (AMBC). Check out our work with ESA regarding AM of Hybrid In718 parts using our EOS M400-4.

Find out more: https://t.co/gyck9yOrhi

#AdditiveManufacturing

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for AM is home to the European Space Agency AM Bench Marking Centre (AMBC).

Check out the work we conducted with POLIMI & ESA to validate the performance of the ProFACE simulation approach using #LPBF components: https://t.co/rKXQMPFZ9R #AdditiveManufacturing

[National Centre for Additive Manufacturing @CentreAdditive]

Our XJET Carmel 1400C leverages NanoParticle jetting technology to build highly complex & dense ceramic components. Currently our machine is running Zircona.

Contact us at [email protected] to find out more about what we are researching in #ceramic #additivemanufacturing

[National Centre for Additive Manufacturing @CentreAdditive]

Our engineers from the NCAM worked together with the University of Birmingham to provide an in-depth assessment of trapped powder removal and inspection strategies for MPBF.

To find out more about our powder removal work, email us at [email protected]. https://t.co/LmlkWs6aG2

[National Centre for Additive Manufacturing @CentreAdditive]

Our AddUp FormUp has the capability of running some of the lowest support angles in Laser Powder Bed Fusion (LPBF).

Contact us at [email protected] to find out more about how we are researching this topic. #LPBF #Laser #Manufacturing

#UKMFG #AdditiveManufacturing #AMUK

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for #AdditiveManufacturing is home to the European #Space Agency AM Benchmarking Centre (AMBC). Learn more: https://t.co/nPJnmXuwyo

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for #AdditiveManufacturing is home to the European #Space Agency AM Benchmarking Centre (AMBC). Learn more: https://t.co/nPJnmXuwyo

[National Centre for Additive Manufacturing @CentreAdditive]

Our TRUMPF 3000 will be part of a benchmarking study to test the latest high performance aluminium alloys in LPBF. This will be part of our work as the ESA AM Benchmarking Centre.

Contact us at [email protected] for more info.

#AdditiveManufacturing #Engineering #Manufacturing

[National Centre for Additive Manufacturing @CentreAdditive]

Interested in AM but not which is the right process for your project? This #onlinecourse will teach you how to select the technology for your requirements, using a unique two-stage process selection tool.

To find out more and to take the course go to https://t.co/VfeieRVG2D

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for #AdditiveManufacturing is working closely with the MTC's #Electrification Steering Committee to identify and address the key challenges being faced by conventionally manufactured #electricmotors.

Find out more: https://t.co/995t0bGQrZ

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for #AdditiveManufacturing is working closely with the MTC's #Electrification Steering Committee to identify and address the key challenges being faced by conventionally manufactured #electricmotors.

Find out more: https://t.co/995t0bGQrZ

[National Centre for Additive Manufacturing @CentreAdditive]

Our TRUMPF 3000 will be part of a benchmarking study to test the latest high performance aluminium alloys in LPBF. This will be part of our work as the ESA AM Benchmarking Centre.

Contact us at [email protected] for more info #AdditiveManufacturing #Engineering #Manufacturing

[National Centre for Additive Manufacturing @CentreAdditive]

The National Centre for #AdditiveManufacturing is home to the European #Space Agency AM Benchmarking Centre (AMBC).

Learn more: https://t.co/nPJnmXuwyo

[National Centre for Additive Manufacturing @CentreAdditive]

Our AM team has extensive experience running Inconel 718 in aerospace and space R&D projects with our EOS M400-4.

Contact us: [email protected] to learn more about building large AM parts using multiple lasers.

#additivemanufacturing #laser #machinery #aerospace #space

[National Centre for Additive Manufacturing @CentreAdditive]

As part of our work as the European founding member of the 'ASTM International Additive Manufacturing Centre of Excellence', NCAM is conducting R&D projects to support the development of the latest standards in AM.

Find out more: https://t.co/bUqPXI1WC8