Introducing CONSTRUCT 2: our first industrial 3D printer.
With record breaking speeds up to 8kg per day plus a 75C heated chamber, this printer is designed to perform in even the most challenging manufacturing environments
Pre-order Deposits now live : https://t.co/34ckJvaXQY
I have been using a @Construct3D_AM C1 for my #SMRRF26 by @The_SMF_ prep for the last few weeks, and what can I say? Out of the box, the machine is delightful.
It's solid, this was a 21 hour print, and it just worked. (ignore the stringing, that's me using the wrong filament profile)
This particular C1 is one of their print farm machines, 2 years old, and yet still going as strong as if it was freshly built.
Let me know if you want me to set up an as close to 24/7 live stream on the run up to #SMRRF so you can see this little fellow churning away with some @sunluofficial filament printing out the #STEM pile
(#3DPrinted in #Sunlu Marble Oreo)
@MrPewpyButWhole That’s the goal of the double linear rail setup, to minimise any twisting caused by momentum. Additionally by putting the motor directly above the top rail it allows for the force transfer to be minimised.
Introducing CONSTRUCT 2: our first industrial 3D printer.
With record breaking speeds up to 8kg per day plus a 75C heated chamber, this printer is designed to perform in even the most challenging manufacturing environments
Pre-order Deposits now live : https://t.co/34ckJvaXQY
@MrPewpyButWhole The nozzle is reinforced with a custom metal 3d printed clamping block, and the heatsink is attached via 4 compressed ceramic shims - this makes the actual overall distance from the nozzle tip to the heatsink 22mm. however the actual distance is -(minus)10mm
So no bent nozzles!!
@MrPewpyButWhole Yup. The main thing we have been able to upgrade over std6 and others is the overal package length is incredibly small. The length of the extruder is less than you’d expect
@MrPewpyButWhole We will do more than that and give accurate testing details for repeatability. Including brand, temperature and final flow rate
The overall melt chamber length is 44mm with a vanadium tool steel nozzle with CHT:tm: geometry
@TheLightSpeedz@DaddyWazzy Thats a good point. I’ll make the webpage clearer once I get back from the show.
The printer is £14,950 and the LOP Unit is £2,500
@joeltelling We will definitely be making some YouTube vids with it. And I’m hoping to bring one to SMRRF.
Formnext is probably too close and we would be able to man a stand with just two of us safely