I assume this VirtualMac 2,1 ran on a 13” MacBook Air or Pro. Pretty good performance! https://t.co/hge43gYDrw
Apple’s virtualisation framework enables nice possibilities!
Dat je als premier geen onderscheid wilt maken tussen bontkraagjes met mondkap die hun kans schoon zagen om te rellen en vreedzame demonstranten tegen het coronabeleid, dat vind ik dan weer veelzeggend. Wat bezielt Rutte? #avondklokrellen
@AlexanderNL Hoewel sommige bedrijven dat nog niet door hebben, elk bedrijf is tegenwoordig een IT bedrijf. Ook BV Nederland (verschrikkelijke term by the way maar ok).
Het kan allemaal zoveel simpeler (en dus efficiënter) …
The Z80 Bus Monitor can now read memory blocks from an SD-card and serve a Z80 with it (with a slow clock).
The Arduino’s SRAM 8K is quite limited, but at least it can serve as a ROM.
Next stop: fill physical RAM with it.
https://t.co/C38gkXUAE7
Converting a RAM+ROM module (# 41d from https://t.co/BiKZdvN4Vj) to 2x RAM for use with #RC2014.
A whopping 64K static RAM I will (hopefully) fill from an Arduino later and boot an #Z80 with it.
@ZxSpectROM your RC2014 Backplane Pro PCB looks great and stuff, but I don’t want everybody to see it naked. So here is my take on a case. Including removable slot covers (which can be inserted to get any configuration you want)!
Available at: https://t.co/mjfyFqi20f
Why is RD not going low for a memory request other than an OpCode fetch?
According to https://t.co/XFl2IP3LXA (“Memory Read or Write”) it should.
Probably something I do wrong in the Arduino code https://t.co/C38gkXUAE7
#Z80
Z80 bus monitor improvements: context depending screens and RGB led to display reads, writes and M1 states, depending on the screen you selected.
Eg, in the IO write screen, led flashes red on each write. 😎
https://t.co/C38gkXUAE7