Alphatec Engineering

Epoxy grout specialists and concrete repair. Alphatec Engineering manufactures, sells and installs Alphatec® Epoxy Grouts for critical machinery. Since 1977.

[Alphatec Engineering @EpoxyGrout]

Across North Africa and the wider MENA region, legacy oil and gas infrastructure is being brought back to full capacity. Production targets are being reset. Equipment is being overhauled.

The foundation it sits on is rarely part of that conversation.

Get in touch!

[Mühendislik Harikası @muhendisIiktr]

95 tonluk bir krank mili, devasa bir LNG deniz motoruna güç veriyor.

[loeschegroup @LoescheGroup]

The particular height of the #verticalrollermill is a physical manifestation of a continuous process flow, allowing gravity and the controlled gas stream to support the internal transport of material from one process stage to the next.

https://t.co/lv4lkGjWxx

#industrialdesign

[Mr. Turbine @MrTurbinePSG]

From inspection to operational readiness, our field service teams deliver onsite expertise, detailed evaluations, and hands-on support to optimize turbine performance and help keep power online. #FieldServices #PowerGeneration #OnsiteSupport

[Alphatec Engineering @EpoxyGrout]

Tech Corner: Epoxy grouts and foundation performance - CompressorTECH² https://t.co/JM9IjXqBKn

[Alphatec Engineering @EpoxyGrout]

@LoescheGroup Nice photo 💚 💯🔥

[Alphatec Engineering @EpoxyGrout]

@RollsRoyce Beautiful💚💯🔥

[Alphatec Engineering @EpoxyGrout]

Precision in action: Our diamond wire emerging smoothly through a core drill hole in a reinforced concrete foundation.
Specialized wire saws for clean, efficient cutting in reinforced concrete. 💎
Ready to tackle your next heavy demolition or renovation project?

[Alphatec Engineering @EpoxyGrout]

@IntEngineering hypnotic

[Alphatec Engineering @EpoxyGrout]

Right in the middle... the drill bit was stuck on the rebar (reinforcing bars). With great effort, we were able to get it out!
#CoreDrill #CoreDrilling

[Alphatec Engineering @EpoxyGrout]

NO!!! Welding caused a change in grain size and/or an inadequate bolt grade; "Improper heat treatment and some service conditions can embrittle the steel, leaving the bolts susceptible to failure under low strain/bending loading or impact" (SMRP)

[Marylavaz @arylavaz]

I don't know if bolt can be repaired

[Alphatec Engineering @EpoxyGrout]

Diamond wire for cutting reinforced concrete within a cut.
Rings with embedded diamonds with a diameter of 10,3 mm. Designed for #Husqvarna wire saws CS 2512 and CS 10.
At Alphatec Engineering #GreenEpoxyGrout we use elite suppliers.
#HusqvarnaConstruction #EpoxyGrout

[Alphatec Engineering @EpoxyGrout]

@WorldlyHQ The first video appears to show an anchor bolt with a J-shaped termination. Judging by its large size, it will likely be used for high-power machines. J-shaped terminations are not recommended by the EFRC (European Forum for Reciprocating Compressors).

[Alphatec Engineering @EpoxyGrout]

When anchor bolts loosen, corrode, or fail to develop adequate load, the result is loss of machine stability, rising vibration levels, and accelerated wear on bearings and seals.

[Alphatec Engineering @EpoxyGrout]

Precision Fastening: The Role of Chemical Anchoring in Structural Integrity - Alphatec Engineering.

Anchor bolt failure is one of the more common  and more preventable, causes of machinery foundation problems in heavy industrial facilities.

[Alphatec Engineering @EpoxyGrout]

Much of the working development length of the anchorage is hidden from view due to embedment into building construction materials,... https://t.co/SPD4fvIbtK

[Alphatec Engineering @EpoxyGrout]

@MrTurbinePSG wow!

[Alphatec Engineering @EpoxyGrout]

Loose anchor bolts. Recurring misalignment. Excessive vibration. Structural engineers at SGH Ltd (https://t.co/1fFhEH8Inr) have identified these as classic symptoms of machine foundation deterioration.

[Alphatec Engineering @EpoxyGrout]

Planned Maintenance Shutdown: 3 Foundation Problems That Can’t Wait

Read about 3 foundation problems that cannot wait and how to fit them into your next planned shutdown:

https://t.co/mex5m4AHm6

[Alphatec Engineering @EpoxyGrout]

@MechanicVids smooth