We’re exhibiting at MD&M West 2027: booth 2242, Anaheim Convention Center, Feb 9-11.
Bring a drawing, a spec, or a problem with a current display. We’ll talk through how it would be built, not just which part to order.
#MDMWest
https://t.co/ODb7YyiOUF
2/2
Kyle Rickey and Mark Mujica make sure the display, embedded board, and power supply work together, tune the touch controller to its conditions, and build complete kits that drive the panel.
Inside our engineering team: https://t.co/V5sF3iLmYT
1/2
The best time to bring in an engineering team is during the design stage. The earlier ours in Ronkonkoma, New York, sees where a display will be used, the more of the design we can build around it instead of working around it later. 🛠️
A vendor's date can change more than once, later or sometimes earlier. 📦
We watch each delivery against its lead time from the moment purchasing places the order, and each change goes through our production planner to sales.
Every part number gets vetted too:
"There are many nuances to the part number that can change the item completely, which would make it unusable for us." - Michael Frank
340 W. No fan. 3 x 5 inches. 🔌
That is the Inission DDP520 on natural convection (open frame, 90 VAC and up). 460 W with airflow, 520 W peaks for 10 seconds, up to 94.5% efficient.
Thermal design notes from Mike Pizzirusso: https://t.co/2KNEnxIIZ8
Gloves and water? That comes down mostly to how the touch controller is tuned, not the construction. We do that tuning ourselves.
The full guide, by requirement and by market:
https://t.co/AIu5zOFxcz
Which PCAP touchscreen construction fits your design? 👆 It depends on where the device has to work.
We build PCAP touchscreens into the display assemblies we design and manufacture in Ronkonkoma, NY, and bond them with VacuBond® optical bonding.
Glass/glass: naturally robust, for impact and public use.
Glass/film: a touch film laminated to a cover glass designed for the product, with its own shape, prints, and coatings.
Film/film: a much thinner, lighter sensor for slim devices.
Deploying that power reliably on a working machine is the harder problem.
We see the opportunity in mining, construction, agriculture, and autonomous material handling. Start with the application, not the processor.
https://t.co/QojEQHfSD4
New from Advantech: the REX-52N, a rugged edge AI platform bringing 248 TOPS to heavy equipment. 🚜 We supply and integrate it with a matching display and power supply.
Jetson AGX Orin Industrial, IP67, Advantech-rated -40°C to +75°C, up to 8 GMSL2 cameras, and CAN FD/J1939.
IBASE's ASB110-PI900: Intel Core Ultra with CPU, GPU, and NPU, up to 48 GB DDR5, and 2.5GbE in 140 x 95 x 60 mm.
The hard part isn't always performance. It's finding room for the computer. 📏
Start with what the system must do, not TOPS.
Image: IBASE
https://t.co/7q5aor7siC
Source the display, computer, and power separately, and that can mean three vendors, three lifecycles, and three sets of interface problems.
We engineer and manufacture all three as one system, and validate it as an assembly rather than as parts.
https://t.co/3SqKtr256J
"We make screens that aren't typically on a phone. They're more for medical, defense, and industrial applications." - Stephen Zanca, Internal Sales Engineer
Five sectors, and each asks something different of a display. 👇
Medical devices get cleaned down: antibacterial touch films and IP65-rated options.
Industrial: wide temperature, fanless designs, continuous duty.
Defense: NVIS-capable and EMI-shielded options.
Audio and lighting control: non-standard sizes and custom cover glass.
Inission Power's HDP1200 is now available from FORTEC US. 🔌
1,200 W. 95.5% typical efficiency. GaN-based PFC. IEC 60601-1 with 2x MoPP.
Mike Pizzirusso, Director of Business Development, on why it's worth an early look: https://t.co/w9O0n5kaDC
Photo: Inission Power
Job offer scam warning ⚠️
Fake offers are going out from https://t.co/vHL9OZHCSv (no hyphen). It’s not us.
FORTEC US email comes only from @fortec.us, and we never ask a candidate to deposit or move money or buy equipment.
How to check and report: https://t.co/0TZOZzNekN
Day four inside our building: quality inspection. 🔍
Before an order ships, Doug Ackert in Quality Control checks it from the customer's perspective:
"If something is brand new, it should look brand new."
https://t.co/XXlKtnBkL0