GFUVE ELECTRONICS

[GFUVE ELECTRONICS @GFUVE2005]

The GF101 is a powerful and portable single phase current and voltage source. All test values are generated absolutely synthetically with a high degree of accuracy 0.02% or 0.05% and stability. Following the different demands of c…https://t.co/pFCrajr4zg https://t.co/8q3KF1Je6L

[GFUVE ELECTRONICS @GFUVE2005]

GF101 programmable Single phase Current and Voltage Source for energy me... https://t.co/rdI3f10opa via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

GF101 Single phase AC power calibrator https://t.co/na4EEor49b via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

The GF101 single phase AC power calibrator is equipped with RS232 PORT as standard communication interface to control external devices remotely. Power Factor Validation Power factor is an important element when users judge the eff…https://t.co/uDQVrBB9So https://t.co/2FUiipWLjy

[GFUVE ELECTRONICS @GFUVE2005]

TEST-750 secondary current injection tester is a world leader reference single-phase test set, based on variac output regulation. Portable universal test equipment for in field relay testing. Single phase relay testers are used by…https://t.co/hzZB3PWnUI https://t.co/F2qo8LcF5Z

[GFUVE ELECTRONICS @GFUVE2005]

TEST-750 secondary current injection tester with timer https://t.co/bKf6Xc4JiO via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

TEST-750 overvoltage and overcurrent relay tester https://t.co/THrv0wPLVw via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

TEST-750 portable single phase relay test set https://t.co/kqy4SzIu2v via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

GF1061 smart CT PT analyzer is mainly used for field or lab testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. With PC control software, Adopt 7 inch touch TFT LCD, self-equipped mini typ…https://t.co/Bm9eXYAvMP https://t.co/aP2OhnCQ29

[GFUVE ELECTRONICS @GFUVE2005]

GF1061 smart CT PT analyzer with PC control software https://t.co/NanPLKLt1F via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

GF112B smart single phase energy meter error test equipment https://t.co/5mubM7u53v via @YouTube

[GFUVE ELECTRONICS @GFUVE2005]

GF112B Single Phase kWh Meter Calibrator is suitable to test various types single phase kWh meters error on site and also can be used to test alternating current parameters - U, I, P, Q, S ,F, E etc. 120A/300V/45-65Hz/0-360.0/0.2%…https://t.co/eeHo28S5PA https://t.co/h8DjKgsPZT

[GFUVE ELECTRONICS @GFUVE2005]

The Model T500HVD is designed to detect the presence of high voltage without physical contact.Its detection range can be changed with an eight position rotary switch. As the sensor is moved closer to the voltage carrying conductor,…https://t.co/DtebWOHfb4 https://t.co/HHgzKiXQWB

[GFUVE ELECTRONICS @GFUVE2005]

The model T-3630 High Voltage Insulation Resistance Tester, also known as megohmmeter, high voltage insulation resistance tester, etc., widely used for the insulation resistance test. The instrument has a large LCD screen gray bac…https://t.co/KsZKgv2fUG https://t.co/mIlcwYwXNm

[GFUVE ELECTRONICS @GFUVE2005]

The round jaw design on the P50 Series AC current probes along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are imp…https://t.co/ce5oIlka9f https://t.co/h05dmRfxUM

[GFUVE ELECTRONICS @GFUVE2005]

The P18 clamp on current probe has good accuracy on small current measurement which can be used on PQA, power and harmonic meters, phase angle meter, energy meter calibrator, measuring around cable bundles, power load monitoring,…https://t.co/38fdyHpsoV https://t.co/VDm72ThvAd

[GFUVE ELECTRONICS @GFUVE2005]

The model Q20B operable jaw AC current clamp on CTs are best-in-class devices for use with power meters, power analyzers and high performance oscilloscopes. Its primary current range is 0-200A AC and secondary current range is 0-2…https://t.co/FOPkNGKwUA https://t.co/Zqxef6vGJD

[GFUVE ELECTRONICS @GFUVE2005]

The P8 current sensor is an affordable & durable mini split core current probe for measurements to 10A AC. Only 180g, it can measure current 0-10 A, max 20A, with class 0.2 accuracy. This low cost current sensor uses a special mag…https://t.co/NYVXOgeii0 https://t.co/GPLRL9DpFY

[GFUVE ELECTRONICS @GFUVE2005]

The model Q8A1 current probe/clamp on ct is based on AC transformer technology for use in measurement of AC current, it is suitable for 5A, 10A cable online measurement. With measurement range of 1 mA to 10A AC and frequency range…https://t.co/JOJLRZdplS https://t.co/ffocW8G55e

[GFUVE ELECTRONICS @GFUVE2005]

The model Q8A2 permalloy core ac current clamp with high accuracy up to 0.1% has been designed for use with multimeters, recorders, power analyzers, safety testers etc. It has low phase shift for power measurement, greatly suitabl…https://t.co/xmfUkT4oLO https://t.co/Oxivuj2HWM