Tweet Teratas untuk #fiberON

sekitar 1 tahun yang lalu

🚨 New Release: Fiberon™ PPS-GF20 🔥🛠️ Built for extreme environments where failure isn’t an option. ✅ Flame Retardant (UL94 V0) ✅ High Heat & Chemical Resistance ✅ Glass Fiber Reinforced ✅ Electrically Insulating #3DPrinting #Polymaker_Newfilament #Fiberon

Polymaker_3D's tweet photo. 🚨 New Release: Fiberon™ PPS-GF20 🔥🛠️
Built for extreme environments where failure isn’t an option.
✅ Flame Retardant (UL94 V0)
✅ High Heat & Chemical Resistance
✅ Glass Fiber Reinforced
✅ Electrically Insulating

#3DPrinting #Polymaker_Newfilament #Fiberon https://t.co/7Oa5F0VFgO

9

98

15

7

10K

sekitar 1 tahun yang lalu

@loyalmoses @Polymaker_3D Lets Make Engineering Filaments Great Again! #FIBERON FTW @Polymaker_3D

0

2

0

62

re:printed 3D

@reprinted3D

lebih dari 1 tahun yang lalu

Hey, about that mysterious tracking number I got from UPS? I was rright! An email from @Sovol3d this morning shows it's for the Zero, and it's scheduled for delivery...TOMORROW!🤗🤪🥳 Now, to get some of that @Polymaker_3D #Fiberon that rings like metal and print a bell...🤣

3

37

1

0

914

lebih dari 1 tahun yang lalu

🚀 We've seen your questions about Fiberon™—and we've got answers! 💡 One of the top ones: "Why no 1Kg option?" 🤔 We answered this (and more!) on Reddit—check it out! 🔍: https://t.co/ujie9kU66E #3DPrinting #Fiberon #AskAway #Polymaker

Polymaker_3D's tweet photo. 🚀 We've seen your questions about Fiberon™—and we've got answers! 💡

One of the top ones: "Why no 1Kg option?" 🤔

We answered this (and more!) on Reddit—check it out! 🔍: https://t.co/ujie9kU66E

#3DPrinting #Fiberon #AskAway #Polymaker https://t.co/Et1DMJtbBi

0

6

1

0

723

lebih dari 1 tahun yang lalu

Get inspired by these amazing designers and bring your Fiberon ideas to life! 🚀✨ Don't miss out—our 15% off sale ends March 12th! ⏳ Shop now! 🔗 https://t.co/tuQwbaI5Rm #Fiberon #3DPrinting #MadeWithFiberon #Sale

Polymaker_3D's tweet photo. Get inspired by these amazing designers and bring your Fiberon ideas to life! 🚀✨ Don't miss out—our 15% off sale ends March 12th! ⏳ Shop now!

🔗 https://t.co/tuQwbaI5Rm

#Fiberon #3DPrinting #MadeWithFiberon #Sale https://t.co/Qav2FZZXha

0

8

1

0

753

lebih dari 1 tahun yang lalu

We appreciate all the in depth technical reviews on Fiberon™ that have been coming in! A great watch if you're interested in the print specs. #3DPrinting #Fiberon #Polymaker

Polymaker_3D's tweet photo. We appreciate all the in depth technical reviews on Fiberon™ that have been coming in! A great watch if you're interested in the print specs.

#3DPrinting #Fiberon #Polymaker https://t.co/qiiCmUYKqM

2

30

3

2

4K

lebih dari 1 tahun yang lalu

Thank you @ModBotArmy for showing our Fiberon PPS-CF10 some love! 🖤 #polymaker #3dprinting #fiberon

3

57

7

8

3K

lebih dari 1 tahun yang lalu

Somebody got a dedicated shelf in my office / workspace 🫣😁 @Polymaker_3D #fiberon #polylite #polyflex #polysonic

1

12

2

0

1K

lebih dari 1 tahun yang lalu

A little preview of the 3D printed "Stronger Cable Holder" mini series in the makes . Let's see if the @Polymaker_3D #fiberon filaments can stand up to their name 🥶🥵🪓 They will be taking on a competitors Pla and ABS for kicks 😁 Last Pa6-cf20 cable holder being printed now, just need to anneal them and I'll be ready to go have some fun 😜🤟

2

21

3

2K

lebih dari 1 tahun yang lalu

This is the 2nd #fiberon PET-CF17 test bracket, increased fan speed on overhangs and scaled flow back to 0.93 instead of 0.95 in the profile. #Dialingthingsin 🎛️

lebih dari 1 tahun yang lalu

This @Polymaker_3D PET-CF17 prints amazing on the @QIDI_3dprinter Xmax3. I upgraded to the 2.5 bi metal hotend the other day...one thing I disliked about hardend steel or Vandium nozzles was the increase in temperature to print basic materials. I was printing pla 240c on hardened steel and 250-255c on Vandium. Qidi 2.5 hotend with bimetal nozzle I'm at 210c. This makes a huge difference when trying to reign in your proper temperatures for high temp filaments. Also another note sites like https://t.co/lp2UxNtigK have profiles mostly for the Qidi Q1 pro which uses almost the same settings as the Xmax3 when paired with the 2.5 hotend upgrade.

Burnstation3D's tweet photo. This @Polymaker_3D PET-CF17 prints amazing on the @QIDI_3dprinter Xmax3.
I upgraded to the 2.5 bi metal hotend the other day...one thing I disliked about hardend steel or Vandium nozzles was the increase in temperature to print basic materials.
I was printing pla 240c on hardened steel and 250-255c on Vandium. Qidi 2.5 hotend with bimetal nozzle I'm at 210c.
This makes a huge difference when trying to reign in your proper temperatures for high temp filaments.

Also another note sites like https://t.co/lp2UxNtigK have profiles mostly for the Qidi Q1 pro which uses almost the same settings as the Xmax3 when paired with the 2.5 hotend upgrade.

0

17

2

0

3K

0

31

4

0

2K

lebih dari 1 tahun yang lalu

First time printing PET-CF17�� Bracket 1 of 3 done for my mini series on engineering filaments. halfway through the 10hr annealing process 😎 @Polymaker_3D #fiberon #tough3dprints

2

11

1

0

388

lebih dari 1 tahun yang lalu

Printing some heavy duty brackets for science, let's see what they can hold for weight and which filament materials stand up best to the job (and explore why) Stay tuned! Big shout out to @Polymaker_3D for helping make this mini video series happen!!! #fiberon 🤙

1

16

3

1

399

lebih dari 1 tahun yang lalu

Printing some heavy duty brackets for science, let's see what they can hold for weight and which filament materials stand up best to the job (and explore why) Stay tuned! Big shout out to @Polymaker_3D for helping make this mini video series happen!!! #fiberon 🤙

1

18

3

1

462