Top Tweets for #flexdipped
Had another Bod on the @Prusa3D #XL5T late last night. I was able to catch it and get the filament off whole the nozzle was still hot, but I'm baffled by what happened:
1. It was a different tool (#5).
2. I had just recalibrated the nozzle offsets.
3. The @SliceWorx3D #FlexDipped build plate had been cleaned before the previous print.
I'm hesitant to try again at this point until I can figure out what is going on. (sigh)
This was the last print I did, so I know the tool (printing white) was fine.

@RedPill_Phil If @SliceWorx3D makes one of their #FlexDipped plates for the L, get that. You won't regret it.
Big thank you to @SliceWorx3D for the fast delivery of my order. Got one of their #FlexDipped plates for Frank. I correct myself slightly seems this one CAN do abs according to the page, just not ASA and a few others but great for pla and PETG as well.
@That1NetworkGuy Hands down, Nathan, try the #FlexDipped plates from @SliceWorx3D. You WON'T be disappointed.
@davidthepurple Get @SliceWorx3D #FlexDipped plates for your other printers and none of them will have bed adhesion issues.
I promise.
I may have been a bit premature on saying the @SirayaTech #Grip was not up to handling the helmet dome, because the @SliceWorx3D #FlexDipped plate didn’t hold the supports either!
Gonna switch plates and try again, this time with different, more robust supports.

Well, the helmet dome failed again. I don’t know if it’s because the supports weren’t dense enough, or what, but sadly, it appears the @SirayaTech #Grip isn’t up to this particular challenge, so it’s back to my @SliceWorx3D #FlexDipped plate for the third try. I don’t want to waste any more filament.

@UncleJessy4Real @Prusa3D Ummm...too late; it's already printing. BUT, and this is a big but, I'm printing it on the @SliceWorx3D #FlexDipped plate, so the adhesion is really strong. I'm not too worried.
(Famous last words, right?🤣)
Damnit @snapmaker, the #U1 has now ruined BOTH SIDES of my @SliceWorx3D #FlexDipped build plate by gouging a line in the bed surface!
WTH am I supposed to do with THIS???😡

THIS is what happens when I don't use the @SliceWorx3D #FlexDipped plate on my @BambulabGlobal #H2C; the purge tower falls over!😡
With any luck, and a little blue painter's tape, I won't lose the entire print.🫰🫰

@joeltelling That @SliceWorx3D #FlexDipped plate holds on to the ABS so well, look what it did to the print when I tried to remove it (even though it still lifted at the edges)!🤯
I’ve never had this much trouble printing ABS before!

@joeltelling Even with a brim, on the H2C, it's lifting off the @SliceWorx3D #FlexDipped build plate!🤯

The @Polymaker_3D #Polylite ASA (old formula) print on my @Prusa3D #XL5T completed, but there was some lifting at the corners, which surprised me given I was printing on the @SliceWorx3D #FlexDipped build plate. So, I’m gonna drop back and punt the job to my @BambulabGlobal #X1C with the @WhamBamSystems #PEX plate that’s always handled ABS prints really well.🤞
I had to have done something wrong because I’ve had successful ASA prints on the XL that didn’t warp using the OEM enclosure; just not sure what. I’m thinking it may have had something to do with slicing the files in @real_OrcaSlicer (the 3MFs were made in Orca and opening them in @PrusaSlicer threw some setting’s warnings).
Oh, well, I suppose this is one of the advantages of having machines from multiple brands that work best with different slicers, right?🙂

@3DMakerNoob @Prusa3D You need to get one of @SliceWorx3D #FlexDipped plates; it'll absolutely change your imnd.
And if you don't believe me, just ask your buddy, @joeltelling; he'll tell you the same thing.😊
The @IndustriesNikko #Magneto helmet finished printing on my @BambulabGlobal #H2C early this morning. The @SliceWorx3D #FlexDipped build plate held on like a champ then released it with a flex.
This thing turned out so nice! Even the purge tower looks good and can be used as a helmet stand to boot.🤣

Okay, about to embark on the next adventure with my @BambulabGlobal #H2C and see if I can get a one-piece print of the Magneto helmet where my @Prusa3D #XL5T failed.
I’ll be using the @SliceWorx3D #FlexDipped build plate, so I won’t have any issues with failing supports either.
Got plenty of filament loaded, so it will fail-over to the second spool of the Ziro Glitter Purple when the first one runs out.🙂
Timelapse is turned on, so I’m all ready.
LET’S GO!🎉🤞

If you have an Anycubic Kobra X, you will want to make sure and get one of these @SliceWorx3D #FlexDipped plates. They're phenomenal, and getting one on sale makes them even better!
Go, go, go!
$39.99 PRE-ORDER SLICEWORX Flex Dipped Plate Textured Spring Steel Sheet 260x260 mm for Kobra X with free shipping!
more info here: https://t.co/NpUsMncWnH
#ad afflink: https://t.co/EUjggB02UJ
Promo Code: PREORDER
Coupon Info:
#3dprintingdeals

@alexgibson3d @Prusa3D Yes. It actually is. I can't recommend the @SliceWorx3D #FlexDipped plates highly enough. Once you've had an opportunity to use one, it'll be the last build plate you'll buy for your printer.
@PatrickLebel9 @I3onkersTv In addition to Patrick's suggestion about moving the prime tower (you could even move it to the front of the build plate), I would suggest buying a @SliceWorx3D #FlexDipped build plate. It holds prints better than any other plate I've used, and lets go easily once cooled down.
Last Seen Hashtags on Sotwe
高中
Seen from Canada
BWC
Seen from Indonesia
brosis()*****************************************************************
Seen from Canada
zoophilia
Seen from United States
ngintipbude
Seen from Indonesia
ป้านิดขอนแก่น
Seen from Thailand
変態芸
Seen from Japan
didsentence
Seen from United States
bbc #omegle reaction
Seen from United States
mty
Seen from Switzerland
Most Popular Users

Elon Musk 
@elonmusk
240.5M followers

Barack Obama 
@barackobama
118.7M followers

Cristiano Ronaldo 
@cristiano
114.4M followers

Donald J. Trump 
@realdonaldtrump
111.8M followers

Narendra Modi 
@narendramodi
107M followers

Rihanna 
@rihanna
98.7M followers

NASA 
@nasa
92.2M followers

Justin Bieber 
@justinbieber
91.8M followers

KATY PERRY 
@katyperry
90M followers

Taylor Swift 
@taylorswift13
84M followers

Lady Gaga 
@ladygaga
75.5M followers

Virat Kohli 
@imvkohli
73.4M followers

Kim Kardashian 
@kimkardashian
70.8M followers

YouTube 
@youtube
68.7M followers

Neymar Jr 
@neymarjr
66.3M followers

Bill Gates 
@billgates
65.2M followers

Selena Gomez 
@selenagomez
63M followers

The Ellen Show
@theellenshow
62.1M followers

CNN 
@cnn
61.7M followers

X 
@x
60.6M followers















