Jacob

[Jacob @JAW966]

That moment when you realize that cool design you have been working on totally looks like a genitals.

[Jacob @JAW966]

@WeberCreativeC Yeah, when printing the motors make 0 noise, and the only thing you can hear are the fans.

[Jacob @JAW966]

@WeberCreativeC final installed those TMC2208s you gave me, I should have done this way sooner.

[Jacob @JAW966]

@WeberCreativeC What I did at the end for this, part of the struggle was trying the dimensions of the grooves, and the work a better work flow for fusion.

[Jacob @JAW966]

MG 151/20 minengeschoß

Been trying to make a effort to learn fusion 360, and couldn't find a STL of this, so I thought it would make good practice... And it took a embarrassing amount of time to make.

[Jacob @JAW966]

Printed using @3DSolutech grey at .2 layer height. Not perfect but a good start for the new firmware.

[Jacob @JAW966]

@MarlinFirmware But once I got it working the calibration and leveling work fantastic!

[Jacob @JAW966]

@MarlinFirmware I used the anycubic Delta config when I updated the firmware, but now the printer doesn't know what to do with itself when I try to use my leveling probe, any suggestions?

[Jacob @JAW966]

@MarlinFirmware It was from Marlin, I am using the version 2, changes the probe height, but nothing for the polarity, and the defining it as a plus doesn't work, I had to manually go to right above the paragraph of code and add the definition, which also had a typo "ancyubic"

[Jacob @JAW966]

@MarlinFirmware Turned out that the config had it inverted by default, thanks a million for the help!

[Jacob @JAW966]

@ChuckHellebuyck @makersmuse 400-700ish

[Jacob @JAW966]

@ChuckHellebuyck @makersmuse Why I think mid-range 3D printers are the most exciting ones being released, because they are good example of what can be achieved with limited resources.

[Jacob @JAW966]

@ChuckHellebuyck @makersmuse Making something expensive is easy, making something affordable is the hard part.

[Jacob @JAW966]

@ChuckHellebuyck @makersmuse New designs have increased cost due to the fact that you have R&D and tooling costs, which makes it really difficult to create a 1st gen low cost, low margin products unless you have considerable capital to keep you afloat while you wait for returns.

[Jacob @JAW966]

@WeberCreativeC @_Tinkerz @Proto_pasta @DanielNoree @3DBenchy USS, the SS is a very, VERY different thing.

[Jacob @JAW966]

@ChuckHellebuyck I love watching someone stop to answer random questions for 45 minutes instead of talking about the stuff I care about.

[Jacob @JAW966]

@3DPrintedAspie @3DReefer @77bergkamp19 @TheMicro3D @HAWK3DPROTO @StarJeff3D @Print3DChannel @joeltelling @MoeJike @KMT82design @Tjtech12 @MakerWiz @Makerthink @neotko @OskarRamajo @pp3dp_se @E3DOnline If you have the time to sit down and do post processing it will always be the better option, but if you don't have the spare time, having a machine that can do it during printing is a boon. I don't think the technology is there yet, but I do think that it holds potential.

[Jacob @JAW966]

@3DPrintedAspie @3DReefer @77bergkamp19 @TheMicro3D @HAWK3DPROTO @StarJeff3D @Print3DChannel @joeltelling @MoeJike @KMT82design @Tjtech12 @MakerWiz @Makerthink @neotko @OskarRamajo @pp3dp_se @E3DOnline I feel like you are missing the most important thing here, the rule of cool.

[Jacob @JAW966]

@3DReefer @3DPrintedAspie @77bergkamp19 @TheMicro3D @HAWK3DPROTO @StarJeff3D @Print3DChannel @joeltelling @MoeJike @KMT82design @Tjtech12 @MakerWiz @Makerthink @neotko @OskarRamajo @pp3dp_se @E3DOnline I think the method the davinci color uses has promise if you are looking for purely multicolored prints, but needs refinement.

[Jacob @JAW966]

Picked up @anycubic3dprint linear plus, and printing non-stop.

Mack Rhukta by bendansie

Speed: 50mm/s

Resolution: .1mm

Temperature: 195 Celsius