M16 studios

Free Protogens ^w^
Thingiverse:

[M16 studios @M16Studios]

I'm opening a pre-order for MK6 at a reduced price of 1000 USD per head and 1200 USD per partial
more on: https://t.co/43VG8gvHAC

[M16 studios @M16Studios]

⚠️MOVING TO TELEGRAM⚠️

https://t.co/Ynh5eoUZpI

[M16 studios @M16Studios]

⚠️MOVING TO TELEGRAM ⚠️

https://t.co/Ynh5eoVxfg

More information in the pinned post and a few posts about future updates are already waiting for you

Despite the fact that I am from Russia, the channel will be in English, all for you.

[M16 studios @M16Studios]

@VanilaCookieCat Я выгорел, раньше мне сильно хотелось сделать протогена, а потом мне стало просто противно этим заниматься

[M16 studios @M16Studios]

Мдааа пропасть на два года было не самым хорошим моим решением. Но является ли плохим решением через два года попытаться начать снова?

[M16 studios @M16Studios]

@Mr_Bubblezzz Sheeeeeeeesh

[M16 studios @M16Studios]

Ultimate Protogen Firmware V3.0
https://t.co/8XS86ls0gn

[M16 studios @M16Studios]

6'th master model? ( • - •) Yes.

57 hours, Petg, 235°, steel nozzle, 4mm wall unfilled. There are defects, but they are minor and will be removed with putty.

[M16 studios @M16Studios]

5'th attempt also does not break the tradition^^

[M16 studios @M16Studios]

@AlexArkoss I hasten to upset

[M16 studios @M16Studios]

4'th attempt does not break tradition^^

[M16 studios @M16Studios]

3'th master model has the wrong scale, it turned out to be about 10% smaller than needed. Probably did not notice during the modeling.

And yes, the third printed m-m goes to the first and second)

[M16 studios @M16Studios]

Attempt 3

[M16 studios @M16Studios]

noooooooooooooooooooooo

The nozzle clogged, the extruder broke all the fittings through which the filament went.

[M16 studios @M16Studios]

c'mon

[M16 studios @M16Studios]

@GizyutuP 36/42cm

[M16 studios @M16Studios]

С'mon!!!

[M16 studios @M16Studios]

no. (f*ck)

after the first mold aaaaaaaahhhhhhhhhhhhhh

[M16 studios @M16Studios]

@LabeVROfficial Second master model

[M16 studios @M16Studios]

YES, YES! Okay, let's go

(over 110 hours of printing)

[M16 studios @M16Studios]

@dude_verse @AlexArkoss Look for petg, there are no options.

[M16 studios @M16Studios]

NO! NO!