Predictive Maintenance of Liquid Petroleum Pipelines
Predictive maintenance can be implemented using a physics-based approach, also referred to as model-based predictive maintenance. This method utilizes a physics-based model to simulate the pipeline and…https://t.co/72ldQhecoz
Predictive Maintenance of Dry Gas Pipelines
Predictive maintenance can be implemented using a physics-based approach, also referred to as model-based predictive maintenance. This method utilizes a physics-based model to simulate the pipeline and predict…https://t.co/Db1YAIBiS0
Compressor Oil Cause Internal Corrosion in Natural Gas Pipelines? Part 2.
Here you can see why the accumulation of compressor oil in natural gas pipelines is an integrity threat that must be assessed and promptly addressed: https://t.co/PmKwexfD7Z
Mo…https://t.co/TBVTaaw9a7
Can Compressor Oil Cause Internal Corrosion in Dry Gas Pipelines?
The compressors used to transport natural gas through pipelines are designed to keep the oil used for lubrication and cooling of the compressor separate from the natural gas. However, in so…https://t.co/N1Wonp2qPz
How to Remove Black Powder From Dry Gas Pipelines Without Pigging?
Pigging and chemical inhibition continue to be the first choice of oil and gas companies in preventing internal corrosion in pipelines. In many cases, our solution, featured by NACE in t…https://t.co/Kdm98CG6w5
How to accurately calculate the volume of accumulated black powder in a natural gas pipeline?
Black powder is an industry name for the abrasive, reactive particulate contamination present in all gas and hydrocarbon fluid transmission lines. Black powder…https://t.co/aK5Q4aqBIG
How to accurately predict the volume of accumulated liquids (water and/or lubricating oil) in a natural gas pipeline?
Internal corrosion occurs due to environmental conditions on the inside of the pipeline. In most cases, the corrosive materials are cont…https://t.co/Xobiu0b3u9
(para leer en español: )
I would like to thank the Colegio de Ingenieros Petroleros de Mexico (CIPM), Paraíso Section for having extended the invitation to be a keynote speaker on the topic "Challenges and Solutions in Detecting and Preventing Internal C…https://t.co/VOEWL8Xf2x
(to read in English: )
Agradezco al Colegio de Ingenieros Petroleros de Mexico (CIPM), Sección Paraíso por haberme extendido la invitación para dar una conferencia magistral titulada “Retos y soluciones en la detección y prevención de corrosión interna e…https://t.co/iSOxVAUtxM
How Prevent Internal Corrosion in Dry Gas Pipelines Without Pigging?
In my two previous posts, I wrote about the well-known problem of overprediction of the number of possible corrosion sites at low flow conditions when using the critical inclination angl…https://t.co/1Ezg6uyYVI
How to accurately identify locations along a dry gas pipeline where liquid water (or other electrolyte) accumulates?
The model to calculate the critical pipe angle of inclination, incorporated by reference into CFR 49, Part 192 and NACE SP0206-2006 Stan…https://t.co/9WdqmSiFmh
CFR 49, § 192.927 “What are the requirements for using Internal Corrosion Direct Assessment (ICDA)?”
“ICDA region identification. An operator's plan must identify where all ICDA Regions are located in the transmission system, in which covered segments ar…https://t.co/TUPZUUZQJb
CFR 45, § 192.927 “What are the requirements for using Internal Corrosion Direct Assessment (ICDA)?”
“ICDA region identification. An operator's plan must identify where all ICDA Regions are located in the transmission system, in which covered segments a…https://t.co/JSCdQGZKcD
Solving the Unsolvable
Without simulation, there are no oil & gas production optimization and internal corrosion assessment in unpiggable pipelines. No deep-water developments. No increase in the recovery factor in unconventional fields. The Multiphase Cl…https://t.co/AHyow7Jw59
Thermography of Offshore Flowlines Helps the Operator Make Decisions With Confidence
Infrared thermography (IRT), also called thermal imaging, is a process where a thermal camera captures and creates an image of an object by using infrared radiation emitt…https://t.co/SO8b4LjLw9
A Small Water Content (Water Cut) May Result in a High Risk of Leaks in Liquid Petroleum Pipelines
Free water and solids accumulated in liquid petroleum pipelines (pipelines transporting export crude oil, gasoline, diesel, stabilized condensate, LPG, j…https://t.co/RuW2WX3FNz
Realize the Benefits of the Simulation-Led Operation and Maintenance Optimization
Multiphase Cloud simulation solutions have been applied broadly across the upstream and downstream sectors of the oil and gas industry. The simulation platform contains the…https://t.co/UB27z7k0bi
Oil and Gas Reserves Worth More than $500 Billion Will Not Be Produced from Horizontal Wells Unless Advanced Technology Is Applied.
While beam pumping may be the most efficient method, it is also the most susceptible to gas locking in highly deviated we…https://t.co/9r5pVq7suh