I’m Aaron. Electrical teacher and lead commissioning engineer.
I built Sparkon because too many electricians are guessing at verification and testing.
Sparkon app: step-by-step testing on your phone
Book: Sparkon Verification and Testing Vol. 1
Method: HVM — Higgins Verification Method
Add the app to your home screen at https://t.co/DwtqUN7R2X
Same content as my TikTok, now here.
Don’t be sorry. Be safe.
Insulation Resistance just one of the 7 tests explained in the Sparkon guide book and phone application.
Get in tough if you want to learn how to test and verify your electrical installation
https://t.co/DwtqUN8oSv
#Electrician#InsulationResistance#Megger#Fluke
#Verification
#Qualified
#Phase6
#Sparkon
Insulation Resistance Testing (IR) – Quick Guide
Insulation resistance testing checks the quality of cable insulation by applying a DC voltage and measuring the resistance in megaohms (MΩ).
Typical pass/fail guidance (L/N example):
- Below 1 MΩ → Fail
- Between 1 MΩ and 2 MΩ → Further investigation required
- Above 2 MΩ → Pass
Important caution:
Wrong test voltage can damage electronic equipment. Common DC test voltages are 250 V, 500 V and 1000 V. Always select the correct voltage for the circuit and isolate or disconnect sensitive electronics before testing.
Why it matters:
Low insulation resistance can indicate damaged cables, moisture, or deterioration that may lead to faults, nuisance tripping or safety risks. It is one of the core tests used when verifying an electrical installation.
This is one of the seven key tests needed to properly verify and certify an installation. Clear step-by-step methods, voltage selection guidance and interpretation are covered in the SPARKON App and Testing & Verification Volume 1.
https://t.co/DwtqUN8oSv
#ElectricalSafety
#Electrical
#Qualified
#InsulationResistance
#IRTesting
#Megger
#Fluke
#Kewtech
#Phase4
#Phaae6
Electrical phone application
Built by an electrician for the electrical industry.
Fundamental learning for any one working with or near electricity.
Sparkon was build to train and pass on industry knowledge in a down to earth way.
Bridging the gap between engineers and sparkies is the driving force
#Electrical
#FYP
#Testing
#Verification
#PhoneApp
#Phase4
#Phase6
#Qualified
Flicking through Sparkon Verification and Testing Volume 1.
Written for electricians who are actually on site — not for sitting in a classroom guessing.
Pairs with the Sparkon app on your phone.
Book + app: https://t.co/gw6GMQgsR5
Don’t be sorry. Be safe.
How to get the Sparkon app on your phone.
Go to https://t.co/DwtqUN7R2X
Open the SPARKON App page
Add it to your home screen
Register and subscribe
Works on iPhone and Android. No app store needed.
42+ modules for testing and verification, including the ones you need for dead and live tests.
Don’t be sorry — be safe.
Sparkon, a first of its kind electrical application, packed with 43 modules including the 7 needed to do all your dead and live testing.
Don’t be sorry be safe with The HVM Higgins Verification Method.
Testing Book also available!