Thunderstruck Ag

Connecting Farmers with Products to make them More Successful on Their Farms🌾 • Helped over 1,000 Farmers Increase Profits • ⚡️DM To Learn more⚡️

[Thunderstruck Ag @ThunderstruckAg]

Redekop spent six years engineering the @redekopmfg KAS Pre-Cleaner and testing it in sand, dust, and snow. Eight debris ports, four sizes for 3 to 8 inch intake pipes. Check your size: https://t.co/r1sxx88jgw

[Thunderstruck Ag @ThunderstruckAg]

Did you see skips during emergence? Now is the perfect time to figure out why.

If you don’t run a seed or fertilizer blockage sensor you won’t catch a blocked run as you’re seeding, but with the @Fertisystem.northamerica Fert Sensor the AT200 Display alerts you in the cab the moment flow stops on a run. You can stop and clear the line while the drill is still in that field. It’s fully wireless, with no hose cutting and no rewiring, and one monitor takes up to 120 sensors.

Come visit us at @agritradetroday booth #558 for a full demonstration.

[Thunderstruck Ag @ThunderstruckAg]

A worn out closing wheel causes more damage than you'd think.

Worn out closing wheels can cause uneven emergence and improper germination which will hurt your yield. In this episode we go over what to look out for, and what would be our recommendation to upgrade too.

@MartinTill1991

Episode 2 of the wear list.

[Thunderstruck Ag @ThunderstruckAg]

The wear list: Episode 1

The most underrated part of the @mudsmithGW spoked gauge wheel. 

Everyday we will be going over one part from a drill that wears that farmers don't commonly check, and what it causes it when it wears. 

If you have a drill that needs to be rebuilt, come visit us at @agritradetoday at booth #558!

[Thunderstruck Ag @ThunderstruckAg]

Today we honor everyone who served. Thank you. From all of us at Thunderstruck Ag.

[Thunderstruck Ag @ThunderstruckAg]

It's time to put your planting, harvest and equipment knowledge to the test!

Let us know how man you got right, and if you want more videos like this!

[Thunderstruck Ag @ThunderstruckAg]

You got questions and we got answers!

Here are the top 3 quesitons we've gotten so far this @agritradetoday

Got questions of you own? Drop them in the comments below or vidi booth #558!

[Thunderstruck Ag @ThunderstruckAg]

Today, we remember those who served, those who never came home, and the families who carry that loss. Lest we forget. From all of us at Thunderstruck Ag.

[Thunderstruck Ag @ThunderstruckAg]

You have questions and we have answers! Missed yours? Put it in the replies and we'll answer it next.

[Thunderstruck Ag @ThunderstruckAg]

Run a drill? We have you covered!

Tune-in everyday this @agritradetoday and we'll be going over OEM wear parts and comparing them to their counter parts that hold up!

Come see us this Agri-trade booth #558

[Thunderstruck Ag @ThunderstruckAg]

In a lot of areas harvest is over, but the work on the farm is never done.

This @agritradetoday we have our lineup up of harvest, planting and skid steer equipment to solve the problems you faced on your farm this year.

Catch us this Agri-trade at booth #558!

[Thunderstruck Ag @ThunderstruckAg]

TJ would like it on the record that he’s ready to sell 150 of these... He’d also like to know what they are.

We can tell you this much. Next year, 150 qualifying farmers get one at special pricing and help us evaluate it in the field. Fitment and terms get confirmed with us after launch at Red Deer, November 11th.

The Secret’s Getting Out: Episode 4

#AgriTrade #RedDeer #ThunderstruckAg

[Thunderstruck Ag @ThunderstruckAg]

Every combine leaves some grain in the field. Nobody can see how many bushels per acre from the cab. The @ScherGain Drop Pan helps you measure it and, with the right sampling procedure, find the source. https://t.co/r1sxx88jgw

[Thunderstruck Ag @ThunderstruckAg]

Running a Fendt combine, MacDon header, or Kinze planter? Dey's Equipment Centre in Tillsonburg, ON is one of our dealers. Not in the area? Click the link in our bio for our dealer locator to find your nearest dealer.

[Thunderstruck Ag @ThunderstruckAg]

Just a notch cut into a concave? Let's clear up a few things about the Razors Edge Concaves. Missed a question? Put it in the replies and we'll take it next.

[Thunderstruck Ag @ThunderstruckAg]

No footage means it can't be leaked. We're calling that a strategy. Please be patient with marketing: we've got a launch date, a number, and a lot of "later." See it in Red Deer on November 11th. Episode 3. #AgriTrade #RedDeer

[Thunderstruck Ag @ThunderstruckAg]

When the cutting edge on your snow pusher wears out, what do you replace? On a @Jenkinsiron it's the edge, because it bolts on. 3/16 steel body, 5/16 end caps. Canadian operators: how many seasons did your last edge go?

[Thunderstruck Ag @ThunderstruckAg]

Don't let worn gauge wheels slow you down during planting season. Cracked rubber? Loose hub? Damaged rim? Check them while your planter's parked. @mudsmithGW fitment and pricing: https://t.co/r1sxx88jgw

[Thunderstruck Ag @ThunderstruckAg]

Faster harvesting means little if you're losing more grain. Razors Edge Concaves use tighter bar spacing up front to improve threshing and wider spacing at the rear to help more grain separate. Field-test results: https://t.co/r1sxx88jgw

[Thunderstruck Ag @ThunderstruckAg]

Even sales is in the dark. All we have is a number: 150. 150 what? Nobody will say. Red Deer, November 11th. Episode 2. #AgriTrade #RedDeer