@paultguitarist They're great when it's a good quality one.
I replaced the bridge on my Ibanez for a Gotoh GE1996T, and it does not go out of tune much anymore. The old bridge was an Edge III and it was cheaply made and had worn down knife edges.
@YewOurKnotReel I don't consider myself an expert but I do know that the first culprit to tuning stability problems, once a proper set up is done, is check the nut.
For sure, check the nut. The nut is a big reason for tuning instability woes.
It could be the bridge. Maybe the knife edges or pivot points are worn down.
@LaneyGH@OmarBhoo If it's the Edge III, that was not a good bridge and there's a reason Ibanez discontinued it. But their guitars are generally great value and their Edge Originals and Lo Pro Edges are great.
@AlanBuck_DG@YewOurKnotReel The Edge III is terrible. That was on my Ibanez RG originally and it didn't take much to break it and wear those knife edges down. And I'm not a super aggressive user of those bridges.
@Rockvegas698 If you get a good quality FR bridge and it's properly set up, they should be stable. There are some things you have to accept with FRs, like: you can't palm mute too hard, can't change your tuning easily, can't do double stop bends properly.
@LaneyGH@OmarBhoo You also are spending tons of money for those so more than likely they are getting higher quality stuff and it's getting extra care. It probably has a good nut, which is why you find it stable.
But when you buy an SE model, it's not like they use the best stuff.
@LaneyGH@OmarBhoo I cannot say for Wilkinson but I can for PRS and I respectfully disagree. The PRS doesn't have the range a good quality FR does, and it doesn't flutter well at all. Without a good nut, the PRS trem can be a tuning stabiliry nightmare.
Yeah probably.
I'd be quite upset if my wife altered my guitars without my knowledge, especially one where I took pride in working on it by myself.
Plus, I like beat up guitars. Beat up guitars doesn't mean bad.