마침 이 시점에서 장수 제한이 풀려서 올려보는 메인 용자 전종 집합입니다. 근래 채색과 구도를 일정 범주에서 고정시킨 것도, 크기와 방향까지 전부 늘어놓을 것을 감안한 한 시리즈기 때문입니다. 이렇게 모아보니 보람은 있었네요.
(화질 저하없는 원본 링크)
https://t.co/1PC07flBuv
At 1/60 scale, the weight of the resin has a major effect on the model’s ability to stand on its own. Fully assembled, it weighs 3.2 kg, about 5–6 times heavier than a typical PG kit. I don’t like using supports, and I insist on having the model stand on its own two feet. So this was a test to see if it could maintain a stable standing pose.
1. Right image
The weight of the paint also cannot be ignored. I gave it a simple test paint job and left it in an environment averaging around 30°C during the summer for three months. As a result, the resin gradually deformed under the weight, causing the upper body to lean backward.
2. Center image
I replaced the heavily loaded joint parts with high-strength resin. I also reduced the weight of some parts and reinforced the joint design. It has remained standing well for a long period of time. With this result, the test is complete.
I've done everything I can with 3D modeling and prototyping using 3D printing. Now, all that's left is the final painting.
It feels like I've finally finished the tutorial. With all the techniques I've learned along the way, I think I'm ready to try making other kits. Faster. Better.