GabrielBME

[GabrielBME @3DGabBME]

At the end, double extrusion was achieved.
Future goal: same model printed with TPU-95 or SmartFlex for blood vesels and E.P. or PLA for bones. @3d_maranon @rupermac @calvoharo_ja @CharlieMonitor @Ultimaker

[GabrielBME @3DGabBME]

Osteochondroma at 1st rib and blood vessels as an anatomical referencer 3D printed at @3d_maranon . After several trials, the structure was finally printed. @rupermac @calvoharo_ja @CharlieMonitor

[GabrielBME @3DGabBME]

As said before, different obstacles ⚒ had to be overcome during this 3D print, especially when trying to use double extrusion.
Under-extrusion occured several times, but the stability of the collarbone's helpers was the most challenging one.

[GabrielBME @3DGabBME]

3D print of upper (maxillary) jaw❌✌for dental surgery planning at Hospital Gregorio Marañón. @3d_maranon @rupermac @calvoharo_ja @CharlieMonitor @Ultimaker

[Rubén Pérez-Mañanes, MD PhD @rupermac]

Uncemented three-dimensional-printed prosthetic reconstruction for massive bone defects of the proximal tibia

https://t.co/6k25SOMAQa

[Rubén Pérez-Mañanes, MD PhD @rupermac]

@EsApasionante En el #HospitalGregorioMarañon utilizamos la #impresion3D médica in-house desde 2014. Fabricación en el propio hospital para comunicación médica, planificación preoperatoria, biomodelos personalizados, guías quirúrgicas...en Cardio, Trauma, Vascular, Anestesia...
@3d_maranon

[El Futuro Es Apasionante de Vodafone @EsApasionante]

La práctica lo es todo. En este hospital de Liverpool han perfeccionado los preoperatorios con realidad virtual e impresiones 3D para disparar su tasa de éxito #ElFuturoEsApasionante

[Rubén Pérez-Mañanes, MD PhD @rupermac]

In-house #3Dprinting is a valuable tool in doctor-patient communication!

@3d_maranon @calvoharo_ja
#HospitalGregorioMarañon
#healthinnovations #digitalhealth #MedEd

[José Antonio Calvo @calvoharo_ja]

“El papel de la fabricación aditiva en la cuarta revolución industrial” En:
https://t.co/VbLC3qB174
Buen trabajo @ferrivasnav

[Rubén Pérez-Mañanes, MD PhD @rupermac]

New case of high-grade spindle cell #tumor in proximal femur where #Bedside3DPrinting has allowed us a complete surgical planning, shortening surgical time and improving resection margins.

@3d_maranon @GrupoGeis @soycot

#HospitalGregorioMarañon #healthinnovations #medtech

[FabLab 3D Hospital Marañón @3d_maranon]

#Bedside3Dprinting workflow:

#3Dprinted patient-specific guiding for osteotomy and hip arthroplasty in a case of bayonet deformity.

https://t.co/Tq2GEWJ8TB

#HospitalGregorioMarañon

[José Antonio Calvo @calvoharo_ja]

https://t.co/ecZf6fVA6X

@PhilipsSpain @meshmixer Cura @Ultimaker @smartmaterials3 @MaterialiseNV
@soycot @EFORTnet @AAOS1 @3d_maranon
#HospitalGregorioMarañon #HospitalMarañon3D
@MCuervoDehesa @rupermac @LydiaMediavilla

[Charlie Molitor @CharlieMonitor]

Mid section slices of a new born baby to show anatomy of the circulatory system 3D printed at @3d_maranon. @rupermac @calvoharo_ja @3DGabBME

[GabrielBME @3DGabBME]

Surgical planing with 3d print of a pelvis at FabLab Hospital Gregorio Marañón. Scaled model in PLA. @rupermac @calvoharo_ja @CharlieMonitor @3d_maranon @Ultimaker

[GabrielBME @3DGabBME]

Sometimes errors (right model) happen at FabLab Hospital Gregorio Marañón. Learning from them is mandatory, so that next time everything goes well (left model).
@3d_maranon @rupermac @calvoharo_ja @CharlieMonitor

[GabrielBME @3DGabBME]

It seems that #Witbox printer also dressed up last weekend at the carnival #medical3dprinting @3d_maranon @CharlieMonitor @BiomedAdrian @BiomedEstefania @calvoharo_ja @rupermac

[Rubén Pérez-Mañanes, MD PhD @rupermac]

Postoperative radiological control after #3dprinting guided femoral osteotomy and hip arthroplasty.

#HospitalMarañon3D
#HospitalGregorioMarañon

[Rubén Pérez-Mañanes, MD PhD @rupermac]

Intraoperative images during femoral osteotomy and intramedullary preparation after correcting the deformity.

[Rubén Pérez-Mañanes, MD PhD @rupermac]

Patient-specific biomodels and surgical guides sterilized and available in the operating room

#HospitalGregorioMarañon
In-hospital #3Dprinting

@3d_maranon @soycot @EFORTnet @AAOS1

[Rubén Pérez-Mañanes, MD PhD @rupermac]

Reverse engineering for sizing appropriate implant and surgical simulation of the fixation after osteotomy.
Cost-effective in-hospital #3Dprinting

#HospitalGregorioMarañon

@3d_maranon @soycot @AAOS1

[Rubén Pérez-Mañanes, MD PhD @rupermac]

Osteotomy design, planning of the femoral component, and in-house manufacturing of patient-specific positioning guides.
The entire process carried out in our FabLab @3d_maranon
@Ultimaker @smartmaterials3