A3D Technologies

Affordable Design, Development, Delivery of 3D and Tech Products

[A3D Technologies @A3DTech]

@adrianbowyer Add baffles inside and you can generate electricity by the fluid displacement of lawful vehicles.

[A3D Technologies @A3DTech]

@loyalmoses Have any issues with all that filament sitting out sucking up all the moisture in the room?

[A3D Technologies @A3DTech]

@philiprosedale I've had 2 SL accounts for over 15 years, I'd still have pause before submitting to ID based verification. While I like it in theory, it's hard to prove that such content was destroyed.

[A3D Technologies @A3DTech]

@_Tinkerz Same, I ended up just ignoring all media for the day, then had to be careful the rest of the weekend and make sure nothing was published on the 1st.

[A3D Technologies @A3DTech]

@joeltelling

[A3D Technologies @A3DTech]

@joeltelling Slightly different dragon, on a slightly different printer (my first print failed too, but then I added some glue stick, and beefed up the bed layer) was really afraid it would fall off, but all 1.3kg held.

[A3D Technologies @A3DTech]

@metalheadprntg @joeltelling Also, where can I get the STL? I'm not seeing it at my usual haunts

[A3D Technologies @A3DTech]

@metalheadprntg @joeltelling This just inspired me to fire back up my CR-30. It's been hanging for 4 months.

Now to find my glue sticks....

[A3D Technologies @A3DTech]

@_Tinkerz @3DGloop @magigoo @ppaukstelis I pre-treated mine with some purple gluestick, haven't had an issue since (gone through about 3kg of filament so far, if a little glue stick gets me through a couple spools between applications I wouldn't be mad)

[A3D Technologies @A3DTech]

@_Tinkerz Seriously. I bought over a dozen 64Gb and 256Gb 2 years ago, and can't find a single one that's not in use, and only half of them are in use.

[A3D Technologies @A3DTech]

@joeltelling @RAPID_Event I wanted to go, but COVID is still going too strong for me. Please share as much as you can for those of us that won't make it.

[A3D Technologies @A3DTech]

@deadpine223 I'm gonna need that rug 😎

[A3D Technologies @A3DTech]

@MazuirRoss Can you not run them directly off SD card? Aren't you DUETs?

[A3D Technologies @A3DTech]

@MazuirRoss What are you guys doing?

[A3D Technologies @A3DTech]

The trick to amazing overhangs and bridging with little to no support? Mount your printer on the wall. Probably also helps that the printer prints at 45° 🙃
Push Plastic PLA
Creality CR30
.6mm nozzle
#3dprinting #infinite3d #3dprintmill

[A3D Technologies @A3DTech]

@_Tinkerz There's a video a few years ago(sorry, don't have the link) where a couple elevator guys talk about keys and locks, and that like 50% of all locks use the same 3 keys.

That in many cities all the police cruisers and taxis use(maybe used by now) the exact same key

[A3D Technologies @A3DTech]

@joeltelling I'll add in my 1600% Benchy. Weighing in at 11kg, with an adverse infill of 8% with a .6mm nozzle.

[A3D Technologies @A3DTech]

@LukesLaboratory @_Tinkerz I'd absolutely download a house (and have, several of them) but I would make lots of tweaks before printing one to live in.

[A3D Technologies @A3DTech]

@thinkyhead You should make this tweet an NFC 🤑