Andy

Kayaker, climber, engineer

[The 3D printing belgian #FreeThe3DPGeneral @3DPBelgian]

And here is the @E3DOnline roto and Revo (RotoVo?) Absolutely shredding on a E3D themed @ratrighardware build. This thing is so fast lmao. Yet another great product from E3D and I am happy to see them still working and creating new stuff. #e3d

[Andy @AndyE3D]

@alvaroprieto If you've still got some, I'd be very interested in picking one up

[Andy @AndyE3D]

@isler_marcel @E3DOnline https://t.co/qZ7zpdpatR

[Andy @AndyE3D]

@JacobMi78442710 @E3DOnline Practically you shouldn't notice a difference. The original hemera was grip limited for materials that you could exert a high force on (PLA, PEEK, etc), the new motor has been designed to be torque limited for these materials just before grip would have previously been lost

[Andy @AndyE3D]

@JacobMi78442710 @E3DOnline Practically you shouldn't notice a difference. The original hemera was grip limited for materials that you could exert a high force on (PLA, PEEK, etc), the new motor has been designed to be torque limited for these materials just before grip would have previously been lost

[Andy @AndyE3D]

@Vishnu_Dhanda @Duet3D That's pretty cool. If you are able to send more details about what you are doing that is causing the error then I can have a look. Either DM me or open a github issue

[Andy @AndyE3D]

I have been working on a Python library to make interacting with Duet 3 & 2's (@Duet3D) over the web easier. It can be used to do (almost) everything that you can do with the normal web interface...but in python.

To install just run `pip install duetwebapi`.

Feedback welcome 🙂

[Andy @AndyE3D]

@DreadMakerAdam @brendonbuilds @Duet3D Do you have an example of that?

[Andy @AndyE3D]

@THEJATMN @SherlockMakes @Rushmere3D @toms3dp @3dAllison Also its worth checking the wiring of the control board you are connecting the motor to as those sometimes have different arrangements

[Andy @AndyE3D]

@THEJATMN @SherlockMakes @Rushmere3D @toms3dp @3dAllison If you don't trust the datasheet for a motor or it doesn't have one then just get a multimeter and measure the phase resistances the determine the wiring pattern.

[Andy @AndyE3D]

@LukesLaboratory @LDOmotors What's changed in v2.0 from v1.x?

[E3D @E3DOnline]

It is with the heaviest of hearts that we announce the death of one of our founding directors, Sanjay Mortimer, who passed away on Saturday 27th November - https://t.co/cYimMKqqMJ

[Andy @AndyE3D]

@hernancurras @MichaellPetch @E3DOnline 0.25mm Yellow
0.4mm Red
0.6mm Blue
0.8mm Green

[Adam @ Vector 3D 🇬🇧 @Adam_V3D]

The new heater core from @E3DOnline for the rapidchange Revo incorporates the heater, thermistor and block together as one unit. Advantages include less danger to the thermistor and no more hot tighten! More details on video tomorrow. #3dprinting @TCT3Sixty

[Andy @AndyE3D]

@ReneJurack What filament did you use to print the metal balls and the ink? Could you make a tutorial video on that 😉

[Rene Jurack @ReneJurack]

Look at that surface finish of the @E3DOnline #ASMBL tool used on the #ToolChanger

[Andy @AndyE3D]

@AmyTheBun @greylingad @greg_the_maker It's on my to do to try a super thick layer height. So far thicker is better but only gone up to 0.3mm. If you go too thick then you lose print resolution as the slicer will start ignoring features (larger layer height requires larger nozzle diameter etc)

[Andy @AndyE3D]

@AmyTheBun @greylingad @greg_the_maker If I'm correct only the top surface has been milled on this part to save time as milling the sides doesn't affect functionality in this case

[Duet3D @Duet3D]

🎉RepRapFirmware 3.3 stable is now released 🥳

A lot has gone into the release so be sure to read the upgrade notes! Highlights:
* Support for 15 movement axes
* Improved CAN-FD bus performance and instrumentation
* Improved step rates on all board
1/2

https://t.co/DO136XmE78

[Adam Haile - @[email protected] @DreadMakerAdam]

Have you got a @Duet3D controlled printer and want an easier way to edit, manage, and backup your configuration? Try out rrgit, my new git-like tool for managing your Duet configs.
https://t.co/oCDiWlTvr3

Many thanks to @AndyE3D for his awesome library that made this possible!

[Andy @AndyE3D]

@DreadMakerAdam That's pretty neat.