BTI_ltd

[BTI_ltd @BTI_ltd]

It. Just. Won’t. Stop. ❄️ ❄️ ⛄️. #johndeere #snowmageddon #princegeorge https://t.co/myfhNAzlrJ

[BTI_ltd @BTI_ltd]

Working on my feeds and speeds for this adaptive clearing operation. 30” axial, 44” radial, 25hp cut. Surface finish could be better. #instamachinist #Fusion360 #JohnDeere #Snowmageddon

[BTI_ltd @BTI_ltd]

Assembling our high precision Juki Nozzle holders. +/- 0.0005” TIR 4 life. #openpnp #juki #instamachinist #pickAndPlace

[BTI_ltd @BTI_ltd]

Digi-Key FTW!! #digikey #pcbruler #CustomerExperience

[BTI_ltd @BTI_ltd]

Lifting plate ready for machining. #powerDrawBar #G0704 #fusion360 #instamachinist

[BTI_ltd @BTI_ltd]

Finishing up a power drawbar design today, with a 3/8" aluminium lifting plate! Safety factor 1.85.... Meh. FEA FTW. #instamachinist #G0704 #FEA #adskfusion360

[BTI_ltd @BTI_ltd]

“Lathes are cool”- me. #instamachinist #lathe #precisionmatthews

[BTI_ltd @BTI_ltd]

Making an M2x35 screw out of C360. #precisionmatthews #instamachinist

[BTI_ltd @BTI_ltd]

This slow-mo is the best I can do to compete with all your Haas VMC chip-shooter videos... #G0704 #instamachinist #Fusion360 #DontJudge

[BTI_ltd @BTI_ltd]

Machined a new fixture plate tonight that uses mitee-bite clamps, a new favorite! #instamachinist #g0704 #miteebite

[BTI_ltd @BTI_ltd]

Turned some collars for our Juki nozzle holder today. +/- 0.0005” on the inner diameter. #instamachinist #lathe #pickandplace #openpnp

[BTI_ltd @BTI_ltd]

Just turning some stainless Damascus, NBD. [302/ aebL] #instamachinist #VegasForge #lathe

[BTI_ltd @BTI_ltd]

Prusa i3MK2 linear rail build. Impressive results. Layer shift as one of the legs popped off. #prusai3 #Fusion360

[BTI_ltd @BTI_ltd]

Prusa i3MK2 linear rail build- testing some of the prints for accuracy. #prusai3 #Fusion360

[BTI_ltd @BTI_ltd]

Prusa i3MK2 linear rail build- First prints! I’d say we are off to a good start. #prusai3 #Fusion360

[BTI_ltd @BTI_ltd]

All cleaned up and ready to rock! #prusai3 #Fusion360

[BTI_ltd @BTI_ltd]

Machining the fixture for the new V3 pick and place head parts. #Fusion360 #instamachinist

[BTI_ltd @BTI_ltd]

Slow-mo superfly #instamachinist #Fusion360

[BTI_ltd @BTI_ltd]

New V3 pick and place head parts !! [and broken end mills] #instamachinist

[BTI_ltd @BTI_ltd]

Prusai3 MK2 linear rail build: Mounting the unreleased Bondtech extruder. #prusai3 @adskFusion360 #bondtech