Bullpen Garage

Off Road shop in Tucson, AZ. Well versed in modifying all aspects of your 4 wheel drive vehicle, from lighting, suspension and everything in between.

[Bullpen Garage @BullpenGarage]

Somebody’s Jeep JKU Rubi needed some much needed love in the steering and suspension geometry department. This Jeep got a new set of Synergy Manufacturing Ball Joints, and a slew of parts from the TeraFlex... https://t.co/AIpklvhD5l

[Bullpen Garage @BullpenGarage]

Anyone local have a pair of Jeep JK Front Lower control arm bolts - axle side laying around? Need them today or tomorrow. Thanks in advance!!

[Bullpen Garage @BullpenGarage]

From today, May 1st, through May 8th, the shop will be open limited hours. Those hours will be 8:30 am to 12 pm. I apologize for the inconvenience, but there are matters in the afternoons that I need to attend to.

Thanks!
Jon R., Owner

[Bullpen Garage @BullpenGarage]

Shop will be closed tomorrow.........gone fishing!!!!!

[Bullpen Garage @BullpenGarage]

Quick and easy lift installed today - newer Toyota USA Tacoma, outfitted with Bilstein Shock Absorbers 5100 series shocks and struts, with the front raised about 2.5” and a add-a-leaf from Revtek Suspension. Tires are 265/75R16s.

[Bullpen Garage @BullpenGarage]

Couple jobs lately - first was a set of Rock Hard 4x4 Patriot Series Tube Slider Rocket Guards installed on a Jeep JLU. Solid protection with multiple mounting points, while also functioning as a step. Second... https://t.co/7OmQFAPyuM

[Bullpen Garage @BullpenGarage]

This is going down at the shop, well, rather going on??? TeraFlex Suspensions Alpine CT3 Kit with 2.1 Falcon Shocks on a Jeep JKU.

[Bullpen Garage @BullpenGarage]

Topic for discussion: a fully loaded 2019 Power Wagon is ~$5000 more than a fully loaded Jeep Gladiator Rubicon.

[Bullpen Garage @BullpenGarage]

Anyone have a clean/close to mint stock JK front bumper I can have?

[Bullpen Garage @BullpenGarage]

Awwww yeah - @fabtechoffroad 6” lift kit with a 4-link conversion and Dirt Logic shocks completed on this 2017 ford F-250! Perfect stance with a set of 37” @TJMEquipped Ridge Grapplers… https://t.co/3qPQ7n3TW0

[Bullpen Garage @BullpenGarage]

Latest project to roll out of the shop - 2017 Ford Motor Company F250 Superduty. This truck got a major suspension lift from Fabtech Motorsports - a 6” kit with a 4-link conversion to delete the factory radius... https://t.co/VSEQ3gYVcZ

[Bullpen Garage @BullpenGarage]

@synergymfg heavy duty tie rod and drag link installed on this jeep TJ to replace the weak factory parts, providing a substantial improvement in strength and steering feel!! @ Bullpen Garage https://t.co/VCDwvJfl7a

[Bullpen Garage @BullpenGarage]

I love it when a company's crappy instructions and insight lead to a $15 part breaking that is integral to the vehicle, and hours of headaches to replace it. All things considered, I am lucky that it was a part... https://t.co/YoaCh1wbPM

[Bullpen Garage @BullpenGarage]

Another #Raptor in and out of the shop with a set of Attitude Adjustment Collars from @ivdsuspension installed, and set at 1.75” of added height. Levels out the truck nicely. @ Bullpen… https://t.co/B8xYLpV0jM

[Bullpen Garage @BullpenGarage]

Dèjá Vu?? Another Ford Motor Company Raptor in the shop for a front height adjustment. Customer was pleased with this setup in his previous Raptor, which I did back in September, so we used the same parts... https://t.co/tArEgx262n

[Bullpen Garage @BullpenGarage]

Been pretty busy lately, but haven’t take. Pics of too many of the projects. This Jeep TJ came in for a TeraFlex Suspensions 2” lift kit and a Smittybilt winch mounted to their mounting plate. Clean and simple, yet very functional.

[Bullpen Garage @BullpenGarage]

Cool job in the shop today to help correct some steering woes. Customer has a @jeep JKUR with roughly 3.5” of lift and was experiencing some problems with the steering setup with the track bar and drag link... https://t.co/phhO7cfm6o

[Bullpen Garage @BullpenGarage]

Nothing to see here - just some @RigidNation D-SS Pro Series LED lights installed, with the windshield lights mounted on Rigid mounts, and utilizing a spot beam pattern. The bumper lights… https://t.co/KOhRgc2Eco

[Bullpen Garage @BullpenGarage]

Got to wire up some good ol’ LED lights today - these are the D-SS Pro Series from Rigid Industries - LED Lighting. The customer chose the spot pattern for the windshield mounted ones, and driving pattern for... https://t.co/5Iqc0qRmnT

[Bullpen Garage @BullpenGarage]

Also installed on the @toyota_global #4runner overlanding build was this set of skid plates from rcioffroad. The full front, transmission, transfer case (with new crossmember) and gas tank… https://t.co/2uYDII3Qjb