Jeff Lumaquin

Equipment Manager - California Golf Club of San Francisco; GCSAA EMCP LEVEL 1 & LEVEL 2 Certified

[Jeff Lumaquin @CalClubEM]

@SteveHammon @HectorsShop @MitchHuntTccc Best bang for the buck is the US General Series 3 boxes from HF. Grab a few and weld a custom frame adding in a few shelves, pegboard and a steel capped wooden top and you’ll have exactly what you want

[Jeff Lumaquin @CalClubEM]

@SteveHammon @HectorsShop @MitchHuntTccc You would be hard pressed to find a toolbox drawer go beyond 30” deep mainly because of how awkward it would be to try and reach the back of the drawer plus slides that can handle the weight of the drawer and tools.

[Jeff Lumaquin @CalClubEM]

@sanmoy87 https://t.co/gY036ckcrM

ULINE carries a 24” version also

[Jeff Lumaquin @CalClubEM]

@HectorsShop Re-seat your ram

[Jeff Lumaquin @CalClubEM]

@sanmoy87 Form a funnel

[Jeff Lumaquin @CalClubEM]

For the price compared to similar products on the market, this thing is stout! Definitely worth it!!!

[Jeff Lumaquin @CalClubEM]

@HectorsShop I know this because I used to moonlight at the big orange and it was always something I looked for

[Jeff Lumaquin @CalClubEM]

@HectorsShop Also, the special buy (the ones with the white band on the box) when they don’t sell they get stuffed in the overheads and they get clearance priced after a while. Get in good with a hardware associate and ask them to check their first phone for clearance items

[Jeff Lumaquin @CalClubEM]

@HectorsShop The $99 starter packs with free tool; usually a 2.0/5.0 and a charger plus tool of your choice is key

[Jeff Lumaquin @CalClubEM]

@bradshawtylerw Have you checked your flywheel magnets?

[Jeff Lumaquin @CalClubEM]

@MikeRollinsSIP @SIPGrinders1902 Hope you measured every tool to fall in line with TSA regs. Would suck to leave a tool behind and wouldn’t trust checking in a backpack full of tools

[Jeff Lumaquin @CalClubEM]

@ZBTurf411 We use the OPW PetroVend 100; 1 terminal can handle 4 pumps and is a card based system

[Jeff Lumaquin @CalClubEM]

@SamBaldea Also, will slot the top of the U channel and make brackets for other tractors we have here since none of them are full framed

[Jeff Lumaquin @CalClubEM]

Can’t get any worse if it’s already broke; first tractor split ever and she’s getting a brand new clutch, rear main seal, resurfaced flywheel, release forks and bearings. Had to fab up a splitting stand and luckily all parts in stock locally

[Jeff Lumaquin @CalClubEM]

@SamBaldea 2”x2” square tube in I pattern w/ all four corners on swivel casters rated for 400lbs ea. uprights are 2” and 1 3/4” receiver tubing to keep the uprights in line. 20t harbor freight bottle jack. The U channel is 4”w and 1 3/4” legs. Will eventually gusset all joints

[Jeff Lumaquin @CalClubEM]

@robel_donLCCC @jaydotseedot Also depending on which terra spike you have, there’s a different kit for GXi models which is 122 34 19

[Jeff Lumaquin @CalClubEM]

@robel_donLCCC @jaydotseedot I haven’t had the pleasure of doing the repair but I do know that kit is pricey and you can probably get away with making your own or piecing a kit together

[Jeff Lumaquin @CalClubEM]

@PedroAAndrade1 There’s a backlapping kit that you can install to drive the reel instead of tearing apart the reel drive 139-4342

[Jeff Lumaquin @CalClubEM]

@chyman_g @Foley_Company @HectorsShop @reelturftechs https://t.co/MU7OS30y42