CarpPazzo

to ₿ or not to ₿

[CarpPazzo @CarpPazzo]

@Morecryptoonl

[CarpPazzo @CarpPazzo]

@MMCrypto Pls not! Need a better entry 😁

[CarpPazzo @CarpPazzo]

@Morecryptoonl Everything except BTC

[CarpPazzo @CarpPazzo]

@Decentralized_M @xeve1337 @CoSatoshi821 😁

[CarpPazzo @CarpPazzo]

@Decentralized_M @SoloSatoshi Do you also use an underheater or preheater when desoldering csd chips?

In my case, the plastic on the chip already starts to melt, but the chip still does not lift off or “float.” I also apply flux, but it still does not seem to help.

[CarpPazzo @CarpPazzo]

@DidiKrypto 99776 USD

[CarpPazzo @CarpPazzo]

@JoanaCotar Ehrenmann 🙏🏼😁

[CarpPazzo @CarpPazzo]

@blocktrainer @YouTube @RomanReher Ich check’s wirklich nicht. Monatelang hieß es Made in Germany, Podcast mit Jannis von @solo_mining etc. Und jetzt steht im Shop plötzlich Made in EU?
Warum wird das nicht erklärt? Das ist doch ein riesiger Unterschied.

[CarpPazzo @CarpPazzo]

@Morecryptoonl MSTR

[CarpPazzo @CarpPazzo]

@marcfriedrich @ZDFheute Und dafür bezahlen wir GEZ. Einfach nur Wahnsinn

[CarpPazzo @CarpPazzo]

@wantclue Already tried Starlink?

[CarpPazzo @CarpPazzo]

@MMCrypto @grok 🚀

[CarpPazzo @CarpPazzo]

@incognitojohn23 Is it possible to verify the functionality of an ASIC off-board using only a multimeter?

[CarpPazzo @CarpPazzo]

@incognitojohn23 Any idea what might be wrong here?
All 4 ASICs are detected in the logs, but the hashrate doesn’t go above 1.3 TH. It seems like not all ASICs are functioning correctly.
Any suggestions on what I should check?

[CarpPazzo @CarpPazzo]

@incognitojohn23 When soldering ASICs, what temperature do you set your hot air station to?

[CarpPazzo @CarpPazzo]

@incognitojohn23 I can see in the logs that only one chip detected on the chain. Is that the correct numeration?

[CarpPazzo @CarpPazzo]

@incognitojohn23 I (662628) history: nonce distribution: 171/0/0/0
asic_result: Job ID: 08 AsicNr: 0 Ver: 229E6000 Nonce E0B502FA…

It seems like only Asci 0 is working. How can I determine which one it is on the board? Also, is there a way to test the BM1370 chips to check if they are damaged?

[CarpPazzo @CarpPazzo]

@incognitojohn23 Thank you! Will check it 💪🏼