Canadian Metalworking Magazine

Canadian Metalworking magazine - Canada's metalworking authority since 1905

[Canadian Metalworking Magazine @CdnMetalworking]

That's a wrap on the 2026 MMEs. We had a great week with events in Edmonton and Calgary. Thanks to our sponsors Elliott Matsuura, Iscar, Mazak, Mitsubishi, and TRUMPF along with everyone who helped make these events great!

We look forward to hosting these shows in 2027.

[Canadian Metalworking Magazine @CdnMetalworking]

If shops cannot justify monthly payments over a five-year term, they should not be leasing new equipment.

Ken Hurwitz talks lease terms in his latest column. Read it here: https://t.co/v2aPjge0VV

#finance #machineshop #machining #lease

[Canadian Metalworking Magazine @CdnMetalworking]

We are kicking off our MME Calgary with our keynote address by Brittany Scarrow of CME.

Join us at Vivo for Healthier Generations Event Space for the show from 10 am to 4 pm today.

https://t.co/USkhZNZLpk

#MMECalgary #tradeshow #manufacturing #Alberta

[Canadian Metalworking Magazine @CdnMetalworking]

Discover different wear mechanisms and how to prevent premature tool failure when machining austenitic stainless steel.

Check out this article: https://t.co/86Du1wmYCl

#insertwear #expertadvice #machining #machineshop #austenitic #stainless

[Canadian Metalworking Magazine @CdnMetalworking]

The MME Edmonton is officially started! John Leder of Supreme Steel is sharing his industry insights in his keynote. At 10 am the exhibit show floor opens.

Don't miss it!

https://t.co/USkhZNZLpk

#RiverCreeCasino #Enoch #MMEEdmonton ##tradeshow

[Canadian Metalworking Magazine @CdnMetalworking]

MME Edmonton kicks off tomorrow.

Join us for a full day of manufacturing technology, live conversations, and access to the latest in machining, fabrication, welding, automation, quality control, and more.

There’s still time to register: https://t.co/zZONDwCtUl

[Canadian Metalworking Magazine @CdnMetalworking]

Successful high-speed machining requires looking at the entire machining ecosystem.

Learn the four considerations when making the move to high-speed machining: https://t.co/66NBOzU5l0

#RPM #highspeedmachining #HSM #machineshop #machining #expertadvice

[Canadian Metalworking Magazine @CdnMetalworking]

Editor Joe Thompson explores how CMMC is reshaping Canadian shops.

Check out his latest editorial: https://t.co/m9LapyN8DG

#CMMC #cybersecurity #defence #projects #machineshops

[Canadian Metalworking Magazine @CdnMetalworking]

Our latest safety column from CCOHS explores how to prevent injuries from slips, trips, and falls on the shop floor.

Check it out: https://t.co/Zwn1T1ihFH

#health #safety #slips #falls #worksafe #CCOHS

[Canadian Metalworking Magazine @CdnMetalworking]

The May digital edition of Canadian Metalworking is officially live.

Check out the latest in high-speed machining, controlling insert wear when cutting austenitic metals, a continuation of the carbide crush, and a look at DfAM.

Read it now: https://t.co/wfW85wAD1k

[Canadian Metalworking Magazine @CdnMetalworking]

We are just two weeks out from the MME Edmonton and Calgary shows.

Don't miss this one day table top show, bringing the latest in machine tools, cutting tools, fabricating and welding, metal finishing, quality, automation, and more!

Register now: https://t.co/zZONDwCtUl

[Canadian Metalworking Magazine @CdnMetalworking]

Manufacturers can begin digitalizing the shop floor with practical steps focused on visibility, data, and process improvement.

Get started with your paperless shop floor journey with these steps: https://t.co/2g2xUjr3No

#Digitalization #shopfloor #manufacturing #paperless

[Canadian Metalworking Magazine @CdnMetalworking]

The Montreal Manufacturing Technology Show is a great way to see new technology and network with industry experts.

Ken Hurwitz shares how to get financing pre-approval before attending MMTS: https://t.co/6DarArNlYq

#finance #MMTS #tradeshow #financing

[Canadian Metalworking Magazine @CdnMetalworking]

Live tooling is now a strategic capability, allowing shops to combine operations, reduce handling, boost throughput, and decrease cutting errors.

Get insights on the benefits of live tooling.

https://t.co/a4IS2IMuHG

#livetooling #machineshop #machining #turning #efficiency

[Canadian Metalworking Magazine @CdnMetalworking]

The MME Winnipeg show is in full swing, kicking off with an engaging keynote from Ron Drepaul of Magellan Aerospace this morning.

If you are in the Winnipeg area, there is still time to stop by the event. The show floor is open until 4 p.m.

https://t.co/zZONDwCtUl

[Canadian Metalworking Magazine @CdnMetalworking]

Anthony Mannella of ISO Certification Consultants Inc. shares why having a weak link in your supply chain will only stack quality issues.

Check out the latest Business Matters column: https://t.co/TOOVayOuVk

#quality #supplychain #ISO #manufacturing #machineshop

[Canadian Metalworking Magazine @CdnMetalworking]

As tungsten prices climb, manufacturers are rethinking everything—from tool design to application strategies and even how products are positioned in the market.

Experts share insights about how carbide’s cost crunch is reshaping cutting tool technology: https://t.co/HoAm8IVnLo

[Canadian Metalworking Magazine @CdnMetalworking]

MME heads to Winnipeg on April 28, and we are excited to welcome Ron Drepaul, GM of Magellan Aerospace Winnipeg, as our keynote speaker from 9 to 10 a.m.

The show floor opens from 10 a.m. to 4 p.m.

Register now: https://t.co/zZONDwCtUl

[Canadian Metalworking Magazine @CdnMetalworking]

Editor Joe Thompson shares why in-person events so important to today's competitive manufacturing landscape in his latest editorial.

Check it out: https://t.co/JdC4BxVUz4

#editorial #AprilIssue #inperson #events #tradeshows

[Canadian Metalworking Magazine @CdnMetalworking]

We had such a great MME show last week in Langley, BC. A special thanks to our sponsors Elliott Matsuura Canada, Iscar, Mazak, Mitsubishi, and TRUMPF.

We cannot wait to bring this momentum to the MME Winnipeg on April 28. Don't miss it!

https://t.co/zZONDwCtUl