Crafteker_US

Engineering premium basswood & flawless SVG files for makers. 🪵
Stop burning wood, start creating.
🎁 8 FREE Laser Files + Calibration Card:

[Crafteker_US @Crafteker_US]

Creality Falcon 10W on 3mm basswood: 5 mm/s, 100% power, 1 pass to cut. 130 mm/s at 30% to engrave. Air assist on, test cut first.

https://t.co/xVvVg9YKok

#lasercutting #basswood #Creality

[Crafteker_US @Crafteker_US]

Atomstack X20 Pro on 3mm basswood: 9 mm/s, 100% power, 1 pass to cut. 190 mm/s at 25% to engrave. Air assist on, test cut first.

https://t.co/8saARvy3Rd

#lasercutting #basswood #Atomstack

[Crafteker_US @Crafteker_US]

Ortur Laser Master 4 20W + 3mm basswood: cut at 10 mm/s, 100% power, 2 passes with air assist. Engrave at 100 mm/s, 55%. Test on a 1x1 in square first. Full settings: https://t.co/muLQuuRK7g #lasercutting #basswood

[Crafteker_US @Crafteker_US]

Make a wish ✨ A layered basswood Aladdin piece: glowing lamp, genie smoke, and a pile of coins against a black background. Laser cut, glued, framed, and pure magic.
https://t.co/jdhNOTJeS1

[Crafteker_US @Crafteker_US]

Ortur Laser Master 3 + 3mm basswood: 40W cuts at 11 mm/s, 98%, 2-3 passes. LE (10W): 6 mm/s, 100%, 1 pass. Test on a 1x1 in square first. Full settings: https://t.co/yYyCxUEaWG #lasercutting #basswood

[Crafteker_US @Crafteker_US]

NEJE 3 Max on 3mm basswood: cut at 5 mm/s, 100% power, 1 pass. Engrave at 130 mm/s, 30%. Air assist recommended. Full settings guide: https://t.co/15nO1a8UXS

[Crafteker_US @Crafteker_US]

Route 66 vibes in a shadowbox 🚦 A layered night scene with a vintage motel, palm trees, a classic car, and a neon sign that glows. Made with laser-cut layers and basswood. Would you hang this in your space?
https://t.co/jdhNOTJeS1

[Crafteker_US @Crafteker_US]

Glowforge Pro 45W on 3mm basswood: cut at 22 mm/s, 80% power, 1 pass. Engrave at 300 mm/s, 30%. Auto air assist on. Settings guide: https://t.co/Lv26vQ0fxs

[Crafteker_US @Crafteker_US]

Embrace the shadows. A Gothic graveyard shadow box with a winged statue, a full moon and a wrought-iron gate, built layer by layer with a laser cutter. Wait for the glowing wing 🌙

[Crafteker_US @Crafteker_US]

Creality Falcon2 22W on 3mm basswood: cut at 10 mm/s, 100% power, 1 pass. Engrave at 50 mm/s, 40%. Full air assist. Settings guide: https://t.co/dh2H3cSWG4

[Crafteker_US @Crafteker_US]

A pup's best portrait, built layer by layer. Watch this Labrador come to life in 3D, complete with a glowing name tag. Made with Crafteker basswood sheets for laser cutting.
https://t.co/jdhNOTJeS1

[Crafteker_US @Crafteker_US]

xTool D1 Pro 20W on 3mm basswood: cut at 8 mm/s, 100% power, 2-3 passes. Engrave at 300 mm/s, 40-60%. Air assist required. Full settings guide: https://t.co/Hoc2WzCgTv

[Crafteker_US @Crafteker_US]

From flat basswood sheets to a playable retro pinball table. Laser-cut bumpers, flippers and a plunger, all assembled by hand. Who would you gift this to? 🕹️
https://t.co/jdhNOTJeS1

[Crafteker_US @Crafteker_US]

Creality Falcon2 40W on 3mm basswood: cut at 20 mm/s, 100% power, 1 pass. Engrave at 350 mm/s, 15%. Air assist on. Full settings guide: https://t.co/q3urng4TBB

[Crafteker_US @Crafteker_US]

Layered liminal space art cut from 3mm basswood. Each layer adds depth—brick hallway, glowing light, silhouette figure. The eerie in-between feeling comes alive through precise laser cuts and careful assembly.

https://t.co/jdhNOTJeS1

[Crafteker_US @Crafteker_US]

Sculpfun S30 Pro Max + 3mm basswood: 9 mm/s, 100% power, 3 passes, air assist at 30 PSI.

Engrave at 310 mm/s, 60%. Defocus +0.5 mm to cut taper.

https://t.co/HgpSbgHhte

[Crafteker_US @Crafteker_US]

Built a glowing NEO-TOKYO cyberpunk city in a shadow box 🌃✨ Multi-layered laser-cut basswood creates incredible depth, plus a real neon sign that lights up. The precision on these cuts is *chef's kiss*

https://t.co/jdhNOTJeS1

[Crafteker_US @Crafteker_US]

Glowforge Plus + 3mm basswood: cut at 160 speed, full power, 1 pass. Engrave at 1000 speed, 40% power.

Not cutting through? Check focus before adding passes.

https://t.co/1TVnNGrHL9

[Crafteker_US @Crafteker_US]

Comgrow Z1 10W on 3mm basswood: 190-250 mm/min, 100% power, one pass, 6-8 psi air assist.

Incomplete at 250? Step down to 210 before changing anything else.

https://t.co/4PtmdWsK6M

[Crafteker_US @Crafteker_US]

Boss Laser 70W on 3mm basswood: 25 mm/s, 60% power, one pass. Engrave at 350 mm/s, 35%.

Speeds are mm/s - don't convert to mm/min. Air assist required.

https://t.co/mw51tuEgjE