Dipartimento di Ingegneria Industriale e Scienze Matematiche @UnivPoliMarche
Sede del Laboratorio di Eccellenza su Additive Manufacturing e Industry 4.0
🌍✨ Presentiamo il progetto GETA! Un'iniziativa co-finanziata dall'Unione Europea per affrontare la povertà energetica nelle aree rurali dei Balcani occidentali e dell'UE. Con corsi di formazione e strumenti innovativi, puntiamo a formare esperti di transizione energetica.
@UNIVPM, @DIISM, and @energysystems attended the final project meeting in Sarajevo (BiH) on 29/10/2024 and the GETA Conference in Sarajevo (BiH) on 30/10/2024 online. This is the official end of the GETA project.
🚀🎓✨ Questa settimana diamo il via alle lezioni per i nostri studenti! 🎓 Pronti per nuove sfide, nuove idee e tanta crescita. In bocca al lupo a tutti i nostri studenti per un anno pieno di successi! 💪💡
✨ #NuovoInizio#Formazione#Innovazione#Industry40#Sostenibilità
"New Perspectives in Robotics for Industry 5.0"
Per studenti del 2° e 3° anno in #Ingegneria#Meccanica è aperto il bando di partecipazione a un evento #BIP
Dettagli dell'evento:
📆 Date: 16 - 20 settembre 2024
📍 Luogo: Facoltà di Ingegneria, Ancona
@UNIVPM, @DIISM, @energysystems on-site activities for providing the questionnaire through the GETA webapp will be carried out between 10th and 21st of June 2024 to measure the level of energy poverty in the center of Italy. Stay tuned!
Seminario di Geometria Algebrica
Mercoledi 26 Giugno 2024 – ore 11:30
Mercoledì 26 Giugno 2024, il Prof. Francesco Galuppi (Istituto IMPAN, Varsavia), terrà un seminario di geometria algebrica applicata ai tensori, dal titolo “Signature tensors of paths”.
📣Al via il #roadshow di DIHCUBE per presentare il polo nazionale per la digitalizzazione del settore delle costruzioni. Prima tappa presso la sede di ANCE UMBRIA alle ore 15.30. Compila il form e partecipa al primo incontro 👉 https://t.co/BfU8oAdWWH
🌟 Unisciti a noi al KUKA Roadshow @i-Labs Industry il 12 giugno! 🌟
Scopri le ultime novità nel mondo della #robotica: dalla collaborativa a quella mobile.
📅 Quando? 12 giugno
📍 Dove? i-Labs Industry, Via G. Guerri 7, 60035 Jesi
@UNIVPM, @DIISM, @energysystems has held a dedicated course (in Italian) for being energy advisors on 27-28/05/2024 at @UNIVPM, Faculty of Engineering, with @ONORI FILIPPO (current Ph.D. student) as a speaker that followed the International Training Course in Ancona.
Università Politecnica delle Marche, DIISM - UNIVPM, EnergySystems@UnivPM is planning on-site activities for providing the questionnaire through the #GETA webapp by the end of June 2024 to measure the level of energy poverty in the center of Italy. Stay tuned!
#univpm#GETA
@UNIVPM, @DIISM, @energysystems will hold a dedicated course (in Italian) on 27-28/05/2024 at @UNIVPM, Faculty of Engineering, with some students that followed the International Training Course in Ancona in August 2023 with some professors of @DIISM. Stay tuned!
🚀 Exciting Opportunity Alert! 🛰️
📆 16 maggio ore 14.30 📍 Aula G2
Seminario "Ingegneria incontra l'Aerospazio"
Non perdere l'occasione di esplorare il mondo dell'innovazione e dell'innovazione aerospaziale!
#Engineering#Innovation#SpaceExploration#EngineeringSeminar
Il giorno martedi 7 maggio 2024, alle ore 10:00, il Dott. Vincenzo Antonelli (@PoliTOnews ) terrà un seminario di Geometria Algebrica, presso l'aula seminari del @DIISM_UNIVPM .
Lunedi’ 6 maggio 2024, dalle ore 10 alle ore 11:30 circa, Paul e Cristina Blaga, Babes Bolyai University, Cluj Napoca (Romania) terranno due seminari successivi sulle loro ricerche riguardanti l’analisi dei campi di Jacobi per sistemi di equazioni differenziali del secondo ordine
@UNIVPM, @DIISM, @energysystems is planning on-site activities for providing the questionnaire through the GETA webapp at the end of 2024 to measure the level of energy poverty in the center of Italy. UNIVPM will hold a dedicated course in August 2023.
📢 Save the date 📢
📆 18th April 2024, 08.30
📍 Room 140/D4
Cost Engineering in #Bugatti#Rimac.
Seminar lead by Leonardo Venuti, at the Faculty of Engineering, Università Politecnica delle Marche, DIISM - UNIVPM, Course "Product Engineering"
organized by Prof. Marco Mandolini.
Università Politecnica delle Marche, @DIISM - @UnivPoliMarche , @EUnivpm: the new #GETA webapp, which has been developed in collaboration with @RevoltSrl , has been released! Check this out: https://t.co/MTeYRP53GX
Mosè Rossi
@UNIVPM, @DIISM, @energysystems: the new GETA webapp, which has been developed in collaboration with @Revolt SRL, has been released! Check this out: https://t.co/RLhPzQPuBo
@UNIVPM, @DIISM, @energysystems is planning the on-site activities for providing the questionnaire at the end of 2024 to measure the level of energy poverty in the center of Italy. UNIVPM will hold a dedicated course in Visso (MC) contact Dr. Mosè Rossi ([email protected]).