Johan

3D Printing since 2022! | Gaming=😊 | Autism/ADHD | Star Wars= Awesome! 😊 | (Open-Source) 3D printing = awesome!🤘 | When DIY, Then DIY |

[Johan @DIYMaker_Johan]

First, I apologize for the wall of text. I really can't make it shorter. My brain is a bucket full of water. Every (bit) of stress, negative things, etc is adding to it. And it's basically overflowing now. A line has crossed kinda.
1/8⬇️

[🇨🇳🇺🇸🇪🇺LDOJason @LDOMOTORSJASON]

You might also want this? INBXX! Kit coming soon from LDO Motors. https://t.co/FTPX9BdsZV

[Azzys Design Works @AzzyDesignWorks]

Guy clicks on my ad and then starts tossing (silly) legal threats.

I never asked Meta to send people straight to my inbox and auto-reply, just wanted them on my website contact page.

Just trying to score some much needed manufacturing biz. Apparently I paid $6.35 for this crap.

[Lost In Tech @lost_in_tech]

🤣👍

[Burnstation3D @Burnstation3D]

3d printed some coasters to show off examples to potential clients, ironed the top side and applied UV image (@BondtechAB you like? 😜)...if a smooth plate and both sides were UV covered you would never know the base material is 3d printed. kinda neat 🤓

@eufyMake #3DtoUVPrinted

[Jeff Geerling @geerlingguy]

Did not have massive LEGO-related scandal on my bingo card for... any year. And Patreon delivering a big L to Bricks & Minifigs. What a weird saga: https://t.co/p5rnhoV9lq

[David @davidthepurple]

Trying to think about how I want to approach stats in my game.

It's a survival game, and I want to make something on-theme. Standard progress bars are so boring, and circles have been done to death. Subnautica 2 e.g. copypasta from Subnautica 1, Below Zero, and other games with a similar UI.

Honestly it doesn't have to be grandiose, or highly detailed. I just want something that is visually appealing, and unique.

[Pooch @repkord]

I harvested the sheet metal from my old PC case today.

I have the black lung now but it was worth it.

[Johan @DIYMaker_Johan]

Awesome, congrats Joel! 🤟😊🤟🎉

[Joel Telling - 3D Printing Nerd ✋ @joeltelling]

I woke up to find that 3D Printing Nerd just surpassed 700,000 subscribers. I know subscribers don’t matter as much as they used to, and could be considered a vanity number - BUT, seeing this was still quite emotional. Thank you all! ❤️

[☢️Fallout Films @FilmsFallout]

It’s over for Bricks & Minifigs and Fork PD. 🤣

[Corey - Mojee3D @Mojee3d]

Lots of purple posts the last few days. 😊

[Corey - Mojee3D @Mojee3d]

Best tool I’ve bought in a while. Not sure why I waited so long to pick one up.

[Kruz @Kruzadar]

If you're inventing a medical product and then hike the price up high out of people's price range, you're a POS and didn't care in the first place.

You only saw $$$$ you'd get from the insurance claim that people'd have to take out for it when they can't afford it themselves.

[Luke's Laboratory @LukesLaboratory]

Amaze amaze amaze

[Pooch @repkord]

Anyone who knows me knows how much I hate sanding. 😡

Miyagi-ing walls for an hour straight is miserable business.

At least doing it in a space helmet makes it slightly less miserable.

[obfuscated_D @obfuscated_D]

I have not been kind to this endmill, it’s singing something fierce

[Johan @DIYMaker_Johan]

I really hope that RAM prices will go down ASAP. 🙃

I want 32GB of DDR4 again instead of 16GB now. And I want how it supposed to be: 32GB in 1 kit. (2x16 or 4x8). I'm noticing that 16GB can be a bit too low for some games. Like Fallout (4) London I think. 🙃🤣

[HueForge @hueforge]

Interestingly none of the standard image editing tools I use will tell you how many distinct colors are in your image. But it's easy enough to vibe-code these days. Check out your images at and see for yourself (runs local on your system)
https://t.co/erENopBRuS

[BIQU @BIQU_Makers]

🔥 𝐘𝐨𝐮𝐫 𝐀𝟏'𝐬 𝐡𝐞𝐚𝐭𝐞𝐫 𝐢𝐬 𝐝𝐲𝐢𝐧𝐠. 𝐇𝐞𝐫𝐞'𝐬 𝐭𝐡𝐞 𝐜𝐮𝐫𝐞.

𝐁𝐞𝐞𝐧 𝐧𝐨𝐭𝐢𝐜𝐢𝐧𝐠 𝐭𝐡𝐞𝐬𝐞 𝐬𝐲𝐦𝐩𝐭𝐨𝐦𝐬?

Heater parts wear out. First layer goes bad. Prints fail.

You buy replacements. Repeat.

It's like taking lozenges for a bad cough... sooner or later, that cough comes back.

𝐓𝐡𝐚𝐭'𝐬 𝐰𝐡𝐲 𝐰𝐞 𝐛𝐮𝐢𝐥𝐭 𝐭𝐡𝐞 𝐏𝐀𝐍𝐃𝐀 𝐂𝐄𝐑𝐀𝐇𝐞𝐚𝐫𝐭𝐡 𝐂𝐞𝐫𝐚𝐦𝐢𝐜 𝐇𝐞𝐚𝐭𝐞𝐫 𝐊𝐢𝐭.

Designed specifically for 𝐁𝐚𝐦𝐛𝐮 𝐋𝐚𝐛 𝐀𝟏 / 𝐀𝟏 𝐦𝐢𝐧𝐢.

Built to last longer. So you can print more and fix less.

✨ 𝐖𝐡𝐚𝐭 𝐦𝐚𝐤𝐞𝐬 𝐢𝐭 𝐝𝐢𝐟𝐟𝐞𝐫𝐞𝐧𝐭 𝐟𝐫𝐨𝐦 𝐭𝐫𝐚𝐝𝐢𝐭𝐢𝐨𝐧 𝐫𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐚𝐧𝐭 𝐩𝐚𝐫𝐭𝐬?

✅ Zirconia ceramic base – High-temperature durability. Long-term stability.
✅ Improved wear & impact resistance – Helps maintain first-layer consistency print after print.
✅ Dual-layer design – Ceramic base + custom heat-resistant silicone insulation pad. Better thermal control. More stable operation.

𝐍𝐨 𝐦𝐨𝐝𝐬. 𝐍𝐨 𝐡𝐞𝐚𝐝𝐚𝐜𝐡𝐞. 𝐉𝐮𝐬𝐭 𝐬𝐰𝐚𝐩 𝐢𝐭 𝐢𝐧.

𝐒𝐦𝐚𝐥𝐥 𝐮𝐩𝐠𝐫𝐚𝐝𝐞. 𝐁𝐢𝐠 𝐝𝐢𝐟𝐟𝐞𝐫𝐞𝐧𝐜𝐞. 👀

👇 How many heater parts have you burned through this year?

🔗 Official: https://t.co/0f3dNLFOdK
🔗 AliExpress: https://t.co/4Ekdxo3Fjs

#BIQU #PandaCerahearth #Bambu #A1 #A1mini #StopReplacing #PrintMore

[Johan @DIYMaker_Johan]

@Medvjed @tommy_prusa3d and that made an shortcut/pictogram on my main Android screen. I deleted it and now it works again! 😅😊😊🤣

2/2

[Johan @DIYMaker_Johan]

For some reason the Printables filter doesn't work on 3 different browser on my smartphone and not sure what's causing it. For a while now.

Is this a known issue? Though to be honest, it's really annoying that it doesn't work. 😬😅

"All models" works
@Medvjed @tommy_prusa3d

[Johan @DIYMaker_Johan]

@Medvjed @tommy_prusa3d First I typed that it still didn't work, but I got a solution. It worked when I opened printables website via here. It opens a browsers inside this app here. I opened it to my default browser and still worked. The cause?

I had https://t.co/r3xfmeUg1M as an "app" installed 1/2⬇️