![mygamesir's tweet photo. [GameSir Perspective]
High Polling Rate ≠ Low Latency — So why are we making an 8K controller?
Lately, We’ve seen a lot of debate regarding polling rates. The community seems split into two camps:
1. "Higher polling rate = faster controller, period."
2. "8K is just a marketing gimmick; GamePadla latency is all that matters."
However, neither is 100% correct. Come join our Reddit AMA & G7 Pro 8K Giveaway! Our Community Manager, Leo, is hosting a session right now to answer any questions you have about 8K polling rates or any other technical specs!
Link: https://t.co/lIF8KUWuUt
-------------------------------------------------------------
1. Debunking the Myth: 1000Hz = 1ms Latency?
For the newcomers: Many brands claim "1000Hz equals 1ms of latency." This is technically false.
As The picture 2 shown, polling rate is simply the frequency at which the CPU asks the controller for data:
1000Hz: The PC checks for input every 1ms (1,000 times/sec).
8000Hz: The PC checks for input every 0.125ms (8,000 times/sec).
Polling rate describes the density of data transmission, not the actual time it takes for your physical button press to register in-game.
------------------
2. So, does 8K actually reduce latency?
Strictly speaking, they are different metrics. However, using our Logic Analyzer (Data in picture 3), we’ve proven that, at least on the G7 Pro 8K, a higher polling rate does facilitate lower latency.
The Logic: A tighter polling interval drastically reduces the "waiting time" for the next data packet.
The Result: The G7 Pro 8K achieves a wired stick latency of just 0.5ms.
The Comparison: Even compared to well-optimized 1000Hz controllers, we are seeing a nearly 10x gap in the data transmission window.
--------------------
3. Hardware vs. "Software Hacks."
Beware of "Overclocking" claims. You cannot simply "patch" a weak chip to 8K. If the MCU (Main Control Unit) isn't powerful enough, forcing a high polling rate actually causes jitter and increased latency.
To make 8K a valuable reality (and not a gimmick), we made two things right:
High-Performance 8K MCU: A dedicated & expensive hardware upgrade to handle massive data throughput.
Rewrite the Code: We stripped away non-essential background algorithms, ensuring the CPU is 100% focused on raw performance.
The practical benefit? In FPS games, your stick movement is incredibly dense and fluid. That "floaty" feeling or pixel-skipping you might feel at lower rates is gone.
--------------------
4. What’s Next: The GameSir 8K Universe!
The G7 Pro 8K is just the beginning. We’re doubling down on raw performance over gimmicks.
Tarantula Series: THE symmetrical controller you're waiting for, Coming Soon™.
Cyclone 3: The king of PC controllers shall return, with an 8k polling rate being its most basic setup.
Hitbox/Fightstick: We're bringing 8K tech to the FGC (Fighting Game Community) this year.
---------------------
#GameSir #controller #G7Pro](https://pbs.twimg.com/media/HEUEhNObYAIKJ6t.jpg)
![mygamesir's tweet photo. [GameSir Perspective]
High Polling Rate ≠ Low Latency — So why are we making an 8K controller?
Lately, We’ve seen a lot of debate regarding polling rates. The community seems split into two camps:
1. "Higher polling rate = faster controller, period."
2. "8K is just a marketing gimmick; GamePadla latency is all that matters."
However, neither is 100% correct. Come join our Reddit AMA & G7 Pro 8K Giveaway! Our Community Manager, Leo, is hosting a session right now to answer any questions you have about 8K polling rates or any other technical specs!
Link: https://t.co/lIF8KUWuUt
-------------------------------------------------------------
1. Debunking the Myth: 1000Hz = 1ms Latency?
For the newcomers: Many brands claim "1000Hz equals 1ms of latency." This is technically false.
As The picture 2 shown, polling rate is simply the frequency at which the CPU asks the controller for data:
1000Hz: The PC checks for input every 1ms (1,000 times/sec).
8000Hz: The PC checks for input every 0.125ms (8,000 times/sec).
Polling rate describes the density of data transmission, not the actual time it takes for your physical button press to register in-game.
------------------
2. So, does 8K actually reduce latency?
Strictly speaking, they are different metrics. However, using our Logic Analyzer (Data in picture 3), we’ve proven that, at least on the G7 Pro 8K, a higher polling rate does facilitate lower latency.
The Logic: A tighter polling interval drastically reduces the "waiting time" for the next data packet.
The Result: The G7 Pro 8K achieves a wired stick latency of just 0.5ms.
The Comparison: Even compared to well-optimized 1000Hz controllers, we are seeing a nearly 10x gap in the data transmission window.
--------------------
3. Hardware vs. "Software Hacks."
Beware of "Overclocking" claims. You cannot simply "patch" a weak chip to 8K. If the MCU (Main Control Unit) isn't powerful enough, forcing a high polling rate actually causes jitter and increased latency.
To make 8K a valuable reality (and not a gimmick), we made two things right:
High-Performance 8K MCU: A dedicated & expensive hardware upgrade to handle massive data throughput.
Rewrite the Code: We stripped away non-essential background algorithms, ensuring the CPU is 100% focused on raw performance.
The practical benefit? In FPS games, your stick movement is incredibly dense and fluid. That "floaty" feeling or pixel-skipping you might feel at lower rates is gone.
--------------------
4. What’s Next: The GameSir 8K Universe!
The G7 Pro 8K is just the beginning. We’re doubling down on raw performance over gimmicks.
Tarantula Series: THE symmetrical controller you're waiting for, Coming Soon™.
Cyclone 3: The king of PC controllers shall return, with an 8k polling rate being its most basic setup.
Hitbox/Fightstick: We're bringing 8K tech to the FGC (Fighting Game Community) this year.
---------------------
#GameSir #controller #G7Pro](https://pbs.twimg.com/media/HEUEhNObYAELfH7.jpg)
![mygamesir's tweet photo. [GameSir Perspective]
High Polling Rate ≠ Low Latency — So why are we making an 8K controller?
Lately, We’ve seen a lot of debate regarding polling rates. The community seems split into two camps:
1. "Higher polling rate = faster controller, period."
2. "8K is just a marketing gimmick; GamePadla latency is all that matters."
However, neither is 100% correct. Come join our Reddit AMA & G7 Pro 8K Giveaway! Our Community Manager, Leo, is hosting a session right now to answer any questions you have about 8K polling rates or any other technical specs!
Link: https://t.co/lIF8KUWuUt
-------------------------------------------------------------
1. Debunking the Myth: 1000Hz = 1ms Latency?
For the newcomers: Many brands claim "1000Hz equals 1ms of latency." This is technically false.
As The picture 2 shown, polling rate is simply the frequency at which the CPU asks the controller for data:
1000Hz: The PC checks for input every 1ms (1,000 times/sec).
8000Hz: The PC checks for input every 0.125ms (8,000 times/sec).
Polling rate describes the density of data transmission, not the actual time it takes for your physical button press to register in-game.
------------------
2. So, does 8K actually reduce latency?
Strictly speaking, they are different metrics. However, using our Logic Analyzer (Data in picture 3), we’ve proven that, at least on the G7 Pro 8K, a higher polling rate does facilitate lower latency.
The Logic: A tighter polling interval drastically reduces the "waiting time" for the next data packet.
The Result: The G7 Pro 8K achieves a wired stick latency of just 0.5ms.
The Comparison: Even compared to well-optimized 1000Hz controllers, we are seeing a nearly 10x gap in the data transmission window.
--------------------
3. Hardware vs. "Software Hacks."
Beware of "Overclocking" claims. You cannot simply "patch" a weak chip to 8K. If the MCU (Main Control Unit) isn't powerful enough, forcing a high polling rate actually causes jitter and increased latency.
To make 8K a valuable reality (and not a gimmick), we made two things right:
High-Performance 8K MCU: A dedicated & expensive hardware upgrade to handle massive data throughput.
Rewrite the Code: We stripped away non-essential background algorithms, ensuring the CPU is 100% focused on raw performance.
The practical benefit? In FPS games, your stick movement is incredibly dense and fluid. That "floaty" feeling or pixel-skipping you might feel at lower rates is gone.
--------------------
4. What’s Next: The GameSir 8K Universe!
The G7 Pro 8K is just the beginning. We’re doubling down on raw performance over gimmicks.
Tarantula Series: THE symmetrical controller you're waiting for, Coming Soon™.
Cyclone 3: The king of PC controllers shall return, with an 8k polling rate being its most basic setup.
Hitbox/Fightstick: We're bringing 8K tech to the FGC (Fighting Game Community) this year.
---------------------
#GameSir #controller #G7Pro](https://pbs.twimg.com/media/HEUEhNNbYAMtpIz.jpg)
Olivia
Online
DavHxh
@DavHxh
Joined December 2020
57 Following
2 Followers
121 Posts
@marchebeltran Ojalá
Thanks to everyone for your support over the last decade, but it's time to move on and close this chapter. More info here: https://t.co/vaID3PkTDG
@mygamesir Gamesir G7 pro 8k . When ?
[GameSir Perspective]
High Polling Rate ≠ Low Latency — So why are we making an 8K controller?
Lately, We’ve seen a lot of debate regarding polling rates. The community seems split into two camps:
1. "Higher polling rate = faster controller, period."
2. "8K is just a marketing gimmick; GamePadla latency is all that matters."
However, neither is 100% correct. Come join our Reddit AMA & G7 Pro 8K Giveaway! Our Community Manager, Leo, is hosting a session right now to answer any questions you have about 8K polling rates or any other technical specs!
Link: https://t.co/lIF8KUWuUt
-------------------------------------------------------------
1. Debunking the Myth: 1000Hz = 1ms Latency?
For the newcomers: Many brands claim "1000Hz equals 1ms of latency." This is technically false.
As The picture 2 shown, polling rate is simply the frequency at which the CPU asks the controller for data:
1000Hz: The PC checks for input every 1ms (1,000 times/sec).
8000Hz: The PC checks for input every 0.125ms (8,000 times/sec).
Polling rate describes the density of data transmission, not the actual time it takes for your physical button press to register in-game.
------------------
2. So, does 8K actually reduce latency?
Strictly speaking, they are different metrics. However, using our Logic Analyzer (Data in picture 3), we’ve proven that, at least on the G7 Pro 8K, a higher polling rate does facilitate lower latency.
The Logic: A tighter polling interval drastically reduces the "waiting time" for the next data packet.
The Result: The G7 Pro 8K achieves a wired stick latency of just 0.5ms.
The Comparison: Even compared to well-optimized 1000Hz controllers, we are seeing a nearly 10x gap in the data transmission window.
--------------------
3. Hardware vs. "Software Hacks."
Beware of "Overclocking" claims. You cannot simply "patch" a weak chip to 8K. If the MCU (Main Control Unit) isn't powerful enough, forcing a high polling rate actually causes jitter and increased latency.
To make 8K a valuable reality (and not a gimmick), we made two things right:
High-Performance 8K MCU: A dedicated & expensive hardware upgrade to handle massive data throughput.
Rewrite the Code: We stripped away non-essential background algorithms, ensuring the CPU is 100% focused on raw performance.
The practical benefit? In FPS games, your stick movement is incredibly dense and fluid. That "floaty" feeling or pixel-skipping you might feel at lower rates is gone.
--------------------
4. What’s Next: The GameSir 8K Universe!
The G7 Pro 8K is just the beginning. We’re doubling down on raw performance over gimmicks.
Tarantula Series: THE symmetrical controller you're waiting for, Coming Soon™.
Cyclone 3: The king of PC controllers shall return, with an 8k polling rate being its most basic setup.
Hitbox/Fightstick: We're bringing 8K tech to the FGC (Fighting Game Community) this year.
---------------------
#GameSir #controller #G7Pro
![mygamesir's tweet photo. [GameSir Perspective]
High Polling Rate ≠ Low Latency — So why are we making an 8K controller?
Lately, We’ve seen a lot of debate regarding polling rates. The community seems split into two camps:
1. "Higher polling rate = faster controller, period."
2. "8K is just a marketing gimmick; GamePadla latency is all that matters."
However, neither is 100% correct. Come join our Reddit AMA & G7 Pro 8K Giveaway! Our Community Manager, Leo, is hosting a session right now to answer any questions you have about 8K polling rates or any other technical specs!
Link: https://t.co/lIF8KUWuUt
-------------------------------------------------------------
1. Debunking the Myth: 1000Hz = 1ms Latency?
For the newcomers: Many brands claim "1000Hz equals 1ms of latency." This is technically false.
As The picture 2 shown, polling rate is simply the frequency at which the CPU asks the controller for data:
1000Hz: The PC checks for input every 1ms (1,000 times/sec).
8000Hz: The PC checks for input every 0.125ms (8,000 times/sec).
Polling rate describes the density of data transmission, not the actual time it takes for your physical button press to register in-game.
------------------
2. So, does 8K actually reduce latency?
Strictly speaking, they are different metrics. However, using our Logic Analyzer (Data in picture 3), we’ve proven that, at least on the G7 Pro 8K, a higher polling rate does facilitate lower latency.
The Logic: A tighter polling interval drastically reduces the "waiting time" for the next data packet.
The Result: The G7 Pro 8K achieves a wired stick latency of just 0.5ms.
The Comparison: Even compared to well-optimized 1000Hz controllers, we are seeing a nearly 10x gap in the data transmission window.
--------------------
3. Hardware vs. "Software Hacks."
Beware of "Overclocking" claims. You cannot simply "patch" a weak chip to 8K. If the MCU (Main Control Unit) isn't powerful enough, forcing a high polling rate actually causes jitter and increased latency.
To make 8K a valuable reality (and not a gimmick), we made two things right:
High-Performance 8K MCU: A dedicated & expensive hardware upgrade to handle massive data throughput.
Rewrite the Code: We stripped away non-essential background algorithms, ensuring the CPU is 100% focused on raw performance.
The practical benefit? In FPS games, your stick movement is incredibly dense and fluid. That "floaty" feeling or pixel-skipping you might feel at lower rates is gone.
--------------------
4. What’s Next: The GameSir 8K Universe!
The G7 Pro 8K is just the beginning. We’re doubling down on raw performance over gimmicks.
Tarantula Series: THE symmetrical controller you're waiting for, Coming Soon™.
Cyclone 3: The king of PC controllers shall return, with an 8k polling rate being its most basic setup.
Hitbox/Fightstick: We're bringing 8K tech to the FGC (Fighting Game Community) this year.
---------------------
#GameSir #controller #G7Pro](https://pbs.twimg.com/media/HEUEhNlbEAAherP.jpg)
❤️Giveaway Alert: GameSir Lunar New Year controller bundle❤️
Perfect for Xbox: G7 Pro
Perfect for PC: Cyclone 2
Perfect for Switch1/2 : Super Nova
Perfect for Mobile: G8 Plus
Perfect for Retro Emulation: Pocket Taco
And perfect for lunar new year: GameSir controller bundle, including all controllers above. Unleash your good fortune with this GameSir collection. Wishing you a spirited Year of the Horse!🐎
Prizes (2 Winners): 2 GameSir controller bundles. Include 5 controllers: G7 Pro, Cyclone 2, Super Nova, G8 Plus, Pocket Taco.
How to enter:
❤️Like this post.
🐔Follow @mygamesir
😺Repost
Ends March 2nd
#GameSir #controller #giveaway
🚨 GameSir x Aimlabs G7 Pro 8K PC GIVEAWAY 🚨
To celebrate the launch of the GameSir x Aimlabs G7 Pro 8K PC, we’re giving away 3 controllers 🎯
8,000Hz polling rate
GameSir Mag Res TMR sticks Gen 2
Built for speed, precision, and consistency
How to enter:
✅ Follow @aimlab and @mygamesir
✅ RT this post
✅ Tag your friend(s)
Giveaway ends February 13.
Good luck gamers 💙🎮
🏆G7 Pro GIVEAWAY for Our #SFLUS2025 Champion! Like, Follow & RT to join.
🐂Legends can never be slain. Huge congratulations to GameSir Brand Ambassador @_MenaRD__ and his team @banditsgaming_ for crushing the competition and securing the Street Fighter League Pro-US 2025 Championship title! 🥇
🎮To celebrate their reign, we are giving away the G7 Pro—gear up to fight like a champion.
🎁Giveaway Drops:
1× GameSir G7 Pro Controller (Winner's Choice: Shadow Ember or Mech White)
HOW TO ENTER:
1️⃣ Like 💜
2️⃣ Follow @mygamesir & @_MenaRD__
3️⃣ Repost 🔁
⏳Winner announced: December 17, PDT
*One winner per platform - parallel giveaways running on r/Gamesir Reddit, Facebook, X, Instagram, and Discord. Please enter all of them through our Linktree, you might just get lucky and win twice!
https://t.co/dIHkirF8vC
#SFL2025 #MenaRD #StreetFighter6
@mygamesir Me acabo de comprar un G7 pro y ahora ya está obsoleto 🥴
Last Seen Users on Sotwe
Most Popular Users
Elon Musk 
@elonmusk
241.7M followers
Barack Obama
@barackobama
119M followers
Cristiano Ronaldo
@cristiano
114.6M followers
Donald J. Trump
@realdonaldtrump
111.9M followers
Narendra Modi
@narendramodi
107.2M followers
Rihanna
@rihanna
98.7M followers
NASA
@nasa
92.4M followers
Justin Bieber
@justinbieber
91.8M followers
KATY PERRY
@katyperry
90.1M followers
Taylor Swift
@taylorswift13
84M followers
Lady Gaga
@ladygaga
75.5M followers
Virat Kohli
@imvkohli
73.5M followers
Kim Kardashian
@kimkardashian
70.9M followers
YouTube
@youtube
68.8M followers
Neymar Jr
@neymarjr
66.5M followers
Bill Gates
@billgates
65.3M followers
Selena Gomez
@selenagomez
63.1M followers
The Ellen Show
@theellenshow
62.3M followers
CNN
@cnn
61.8M followers
X
@x
60.7M followers