Finally caved and bought the Bambu X1! Decided to do a video on setting it up and initial thoughts. Check it out here: https://t.co/Prwxguouv7
#3dprinting
Amazing story of how one of our Makerspace members used Fusion 360 and 3D Printing to create a functional prototype of her invention. Check out the video here: https://t.co/hqq5NwfA50
#3dprinting#fusion360
Best container I've ever made! Designed in Fusion 360 and printed with @Matterhackers wood pla and @Overture sky blue pla. Snap fit the white inlay pattern. Now to figure out what to put inside. Full design tutorial on my youtube channel -DesktopMakes.
#Fusion360#3dprinting
New Fusion 360 Video Tutorial - Design a Print-in-Place Chain.
Full step by step tutorial in link below or simply go to my youtube channel. https://t.co/LtTGKzJYcf
#fusion360#3dprinting
You ever design and print a working hinge? These are so satisfying to make. I designed this in Fusion 360 and after applying a few slicer tricks, I was able to get to print in just 19 minutes. Full video tutorial on my yt https://t.co/IFSpPUVCS1
#3dprinting#fusion360
I've made snap fit and friction fit enclosures but this has to be the most satisfying enclosure. Great design by @clockspring3d. You need to check out his work. Of course I had to try designing my own in #fusion360.
#3Dprinting
Slicer Support vs designing my own supports in Fusion 360.
For the most part I let the slicer generate supports when I need them but occasionally it's just better to design your own.
Full tutorial on my youtube channel
https://t.co/dKojPQDA7s
#3dprinting#fusion360
Did you know you can enter formulas when entering dimensions and that PI is a defined constant. This came in handy when I needed to define my circle in terms of Circumference instead of Diameter. Careful though, only works with Capital PI and not pi. https://t.co/o4BnYGkh7V
Slicer Support vs designing my own supports in Fusion 360.
For the most part I let the slicer generate supports when I need them but occasionally it's just better to design your own.
Full tutorial on my youtube channel -DesktopMakes
#3dprinting#fusion360
There's something about the feel and sound of a perfectly designed snap fit that sends a rush of endorphins to my brain.
Full tutorial on my youtube channel -desktopmakes
#3dprinting#fusion360
I decided to try and create a snap fit cylindrical inlay pattern. There's room for improvement but pretty happy with the results. Also, lots of design techniques I cover in the full tutorial. Check it out on my youtube channel https://t.co/o4BnYGkh7V
#3dprinting#fusion360
My threaded Easter Egg! Fun to make and even more fun to give.
Check out my full Fusion 360 design tutorial here: https://t.co/KhsNezjeKv
Enjoy! π£
#3Dprinting#fusion360
Up for a Fusion 360 design challenge? Check out my new video. Give the challenge a try and then see if your design approach matches mine! Here's the link to the video: https://t.co/ai1Muq7zmA
#3dprinting#fusion360