West Coast 3D

[West Coast 3D @DubC3D]

DSE back button housing for DS/PS5 with daughter board mount. Daughter board for SuiOvOi pictured.

[West Coast 3D @DubC3D]

Prior to being in contact with WalleCustoms i already had the intention of making a DSE button housing and prior to even knowing about yours, it was already on the cards. Designed it myself fully.
I get that you have made up your mind on the matter and i will just leave it at that. I wish you all the best.

[West Coast 3D @DubC3D]

A couple of things i want to address regarding my designs.

The first is regarding my shoulder buttons.
I scratch built and design it myself, from the ground up taking design cues from the shape of the controller itself. I understand that overlaps in design are going to happen and i never intentionally or otherwise copied laverstas design.

Did i see his buttons prior to drawing mine up? Yes, as well as other shoulder button designs.
Did i take inspiration from his design and other shoulder buttons? Yes, and for that i give full credit to laversta as my design was intended to be something that needed to look and feel good to use and his appears to be the best out there and i aspired to design something of similar quality.
I did not copy his product but i can understand someone may look at mine and say so, so if there has been any confusion caused i do apologise.
Laverstas design was before mine.

Secondly i want to address the DSE back button housing i designed.
i wanted to design a housing that utilises the Extermerate DSE button replacement kit that can be easily installed without glue and i wanted the installation process to be repeatable and accurate.

The only two references i had for my design were from a twitter post by rakudayasaaan and from a controller built by Headglytch, a controller with red front and transparent rear. Both have a kind of 3d printed frame to house the DSE kit from what i gather and both with Firebird boards.
Rakudayasaans appears to be secured to the back of the board somehow, the headglytch controller i have no idea, looks like some kind of frame but how or what it actually looks like i had no idea until someone posted a picture of it on my post.

My design was intended to be secured to the rear shell to be universal so it could be installed regardless of the board being used.

I know this is very long winded but i want to be clear that i had no ill intention and if there are any design overlaps it was not my intention to do so and do apologise for any confusion caused. All my designs are originall and my own, I intend to operate with the upmost integrity.

WC3D

@larvesta10

[West Coast 3D @DubC3D]

@larvesta10 i had no idea about that. even so i think mine is very different to yours. Mine is secured to the rear shell and yours appears to be secured to the back of the board?

[West Coast 3D @DubC3D]

@akai_50_ this will likely be a kit but atm its still not ready for market as we are still testing. please keep an eye out as we will announce so. thanks

[West Coast 3D @DubC3D]

Dual Sense edge back paddle housing to allow retrofit to Dual Shock 4 (PS4 ) controller

[West Coast 3D @DubC3D]

@Lb7Ya These are still in beta phase so please stay tuned for a market ready product

[West Coast 3D @DubC3D]

@kawstuh @larvesta10 regarding the shoulder buttons i understand your thoughts. Regarding the DSE housing, the image youve shared here is the first time im seeing something that detailed. Ive addressed both in a long winded post and apologise for that but please have a read.

[West Coast 3D @DubC3D]

DS4 Shoulder Button design. This design is currently being tested and will be available to purchase soon.

[West Coast 3D @DubC3D]

@WalleCustoms @larvesta10 I appreciate the support @WalleCustoms, i have made a post in response to the allegations and would hope that it will clear things up, thank you.

[West Coast 3D @DubC3D]

@kawstuh @larvesta10 how is it a rip off of his work? its a complete ground up design?

[West Coast 3D @DubC3D]

Recently completed assignment for @WalleCustoms .
Custom designed shoulder button for the DS4 (PS4 ) controller.

[West Coast 3D @DubC3D]

West Coast 3D.
Custom design and prototyping based in Western Australia.