ZTEX GmbH

ZTEX GmbH is a manufacturer of FPGA Boards

[ZTEX GmbH @FPGA_BOARDS]

New SDK release (https://t.co/YafUKuuMyi) with additional licensing options

[ZTEX GmbH @FPGA_BOARDS]

New #FPGA Board variant with industrial temperature range USB-FPGA Module 2.01c, see https://t.co/lt8ZypO8ts

[ZTEX GmbH @FPGA_BOARDS]

New SDK release: 20170322: important new feature C API for host software: https://t.co/ULibtN4SID

[ZTEX GmbH @FPGA_BOARDS]

New SDK release: 170301: Bugfixes and small improvements, see https://t.co/YafUKuuMyi

[ZTEX GmbH @FPGA_BOARDS]

USB-FPGA Module 2.18 wit Artix 7 XC7A200T and FX3 is available now: https://t.co/msceNkjnqz

[ZTEX GmbH @FPGA_BOARDS]

New SDK Release: 161130: Support for USB-FPGA Modules 2.18: https://t.co/AxlGbcZt7x

[ZTEX GmbH @FPGA_BOARDS]

Documentation of the new FPGA Board with largest Artix 7 FPGA and EZ-USB FX3 published: https://t.co/pT9B9lzUTE

[ZTEX GmbH @FPGA_BOARDS]

Upcoming USB-FPGA Modules 2.18 with largest Artix 7 #FPGA XC7A200T, FX3 and RAM are now in production and should be available end of Nov.

[ZTEX GmbH @FPGA_BOARDS]

Here is a guide for porting host software to the new SDK release (with usb4java/libusb-1.0): https://t.co/uYZMOwVo9a

[ZTEX GmbH @FPGA_BOARDS]

With memfifo example now 207 MByte/s can be measured. Theoretical bandwidth limit between #FX3 and #FPGA is 208 MByte/s ...

[ZTEX GmbH @FPGA_BOARDS]

New SDK release now uses libsub-1.0: https://t.co/AxlGbcZt7x

[ZTEX GmbH @FPGA_BOARDS]

New SDK release with high speed FPGA configuration and SD card support for FX3, see https://t.co/AxlGbcZt7x

[ZTEX GmbH @FPGA_BOARDS]

Default Firmware now has a communication interface: https://t.co/3Vy2T2KHr0

[ZTEX GmbH @FPGA_BOARDS]

New SDK Release with support for the new FPGA Boards and new features, see https://t.co/AxlGbdh3Z5

[ZTEX GmbH @FPGA_BOARDS]

3 new FX3 based FPGA Boards: USB-FPGA Modules 2.14c,d,e with Artix 7 XC7A50T to XC7A100T #FPGA, USB 3.0 and SDRAM: https://t.co/LUuoHfgyMX

[ZTEX GmbH @FPGA_BOARDS]

Here is a hires-photo of the new USB-FPGA Module 2.14 with USB 3.0 interface, Artix FPGA and DDR3 SDRAM

[ZTEX GmbH @FPGA_BOARDS]

Documentation for USB-FPGA Modules 2.14 (with Artix FPGA and EZ-USB FX3) completed: https://t.co/LUuoHeYXVp

[ZTEX GmbH @FPGA_BOARDS]

New SDK release with FX3 support (all relevant features) and support for the new #FPGA Boards: https://t.co/AxlGbcZt7x

[ZTEX GmbH @FPGA_BOARDS]

First FPGA Boards with EZ-USB FX3S (USB 3.0 Controller) are available: https://t.co/LUuoHeYXVp

[ZTEX GmbH @FPGA_BOARDS]

ZTEX wishes everyone a Marry Christmas and a Happy New Year