FollowMe Tandem

The safe & fun way to attach your child's bike to yours. Part of @Cyclesense

[FollowMe Tandem @FollowMeTandem]

@hunt_ele Hi Ele.

Unfortunately it looks as though your clamp’s weld is slightly out of kilter. The opening isn’t large enough.

Apologies for this. I’ll get a replacement part in the post for you ASAP.

[FollowMe Tandem @FollowMeTandem]

@SciAnsell if you want to go even further, you could put a bit of outer gear cable around the section of cable that runs through the groove. It shouldn’t be necessary though.

[FollowMe Tandem @FollowMeTandem]

@SciAnsell also, for a nice bike like that I would recommend using a wrap of old inner tube around the frame underneath the metal strap. It will protect the paint and also give the clamp something better to bite/tighten against.

[FollowMe Tandem @FollowMeTandem]

@SciAnsell Dave, no need to get your file out. There is a groove cut into the clamp to allow the cable to run through here

[FollowMe Tandem @FollowMeTandem]

@LoicThePiaf @TamauPogi 😂 c’est une connexion très stable!

[FollowMe Tandem @FollowMeTandem]

@lazysupper send an email to the address on our site with your delivery address and which bikes you want to use. I can quote for delivery to Japan.

[FollowMe Tandem @FollowMeTandem]

as of *right now* you can use paypal to purchase a followme; enabling you to pay in 3 interest free instalments - https://t.co/LI1jnsZm33

[FollowMe Tandem @FollowMeTandem]

@PurpleRick_C317 It’s normal and will get better over time. There is nothing abnormal about the hub spacing on that bike. We have aftermarket XL skewers for bikes with wider axles and the FollowMe has no problem with those either. Don’t be afraid to stretch it; it won’t break.

[FollowMe Tandem @FollowMeTandem]

@MAriganello @BikeOttawa Yes, you can tow a child and carry another on a seat with the FollowMe, no problem. @truc_a_velo would be the ones to contact in Canada.

[FollowMe Tandem @FollowMeTandem]

Or you can order them separately here - https://t.co/4xhi4SByHq

[FollowMe Tandem @FollowMeTandem]

Hollow axle adaptors are now back in stock after 8 months!

[FollowMe Tandem @FollowMeTandem]

You can order them with a FollowMe here - https://t.co/LI1jnsZm33

[FollowMe Tandem @FollowMeTandem]

@CP_Newell end of March/early-April.

[FollowMe Tandem @FollowMeTandem]

Hi everyone. The price of FollowMe Tandems will soon rise circa 10-15%. This is due to our next incoming shipment being our first since leaving the EU and coronavirus. Transportation costs have increased and we will also have duties and additional disbursements to pay.

[FollowMe Tandem @FollowMeTandem]

Just a final reminder on this. Stock is now with customs so last chance to get a FollowMe before the prices rise.

https://t.co/LI1jnsZm33

[FollowMe Tandem @FollowMeTandem]

Hi everyone. The price of FollowMe Tandems will soon rise circa 10-15%. This is due to our next incoming shipment being our first since leaving the EU and coronavirus. Transportation costs have increased and we will also have duties and additional disbursements to pay.

[FollowMe Tandem @FollowMeTandem]

PS - if you need the hollow axle option for your child's bike then it will still be cheaper to purchase the standard configuration now and get the adaptor separately when they're available again in ~March - https://t.co/4xhi4SByHq

[FollowMe Tandem @FollowMeTandem]

So... if you want a FollowMe now would be a good time to purchase whilst we still have some left at the current price - https://t.co/LI1jnsZm33