Gadget Reboot

Electronics Projects

[Gadget Reboot @GadgetReboot]

Testing cables with lots of GPIO expansion! Thanks to @PCBWayOfficial for the PCBs.
https://t.co/xAx4rl94bh

[Gadget Reboot @GadgetReboot]

Serial UPDI programmer pcb - works better and is smaller than the older JTAG2UPDI Arduino Uno method of programming Atmel parts in Arduino IDE.
Thanks to @PCBWayOfficial for the pcbs!
https://t.co/9HLWkkOgHd

[Gadget Reboot @GadgetReboot]

@clearkoths @SGirl0311 @PCBWayOfficial It is!

[Gadget Reboot @GadgetReboot]

Trying out the Forrest Mims op amp percussion synth from the Engineer's Mini Notebook. Thanks to @PCBWayOfficial for the PCBs!
https://t.co/qqBa2psYDI

[Gadget Reboot @GadgetReboot]

More guitar octave fuzz experiments. Thanks to @PCBWayOfficial for the audio jack breakout PCBs!

https://t.co/RM6gCURzQB
@SGirl0311

[Gadget Reboot @GadgetReboot]

Transistor circuit experimenting with an NPN pcb from @PCBWayOfficial
https://t.co/CC11YaWvnc

@SGirl0311

[Gadget Reboot @GadgetReboot]

NES controller interfacing - adding turbo fire to A/B buttons.
Thanks to @PCBWayOfficial for NES connector PCBs!
https://t.co/GsXkibRsso
@SGirl0311

[Gadget Reboot @GadgetReboot]

If only I had an Arduino Nano in the 90s, I wouldn’t have needed to spend all of that money on a special game pad with turbo fire buttons. I could’ve done it myself.

[Gadget Reboot @GadgetReboot]

These SK6812 LEDs make it easy to hook up a bunch of indicator lights on a breadboard when a lot are needed at once. Thanks to @PCBWayOfficial for the pcbs!
https://t.co/2vVT3w3zfI
@SGirl0311

[Gadget Reboot @GadgetReboot]

Testing surface mount LED soldering for an upcoming project, routing land line phone audio connections for multiple phone calls in the phone line simulator.

[Gadget Reboot @GadgetReboot]

Octave fuzz guitar effect experimenting time.
Thanks to @PCBWayOfficial for the stomp switch breakout pcb!
@SGirl0311

https://t.co/koI7kinbKK

[Gadget Reboot @GadgetReboot]

Making a Nixie Tube counter to test the HV5222 driver.
https://t.co/2RZcc5tihH
Thanks to @PCBWayOfficial for Nixie Tube socket breakout pcbs!
@SGirl0311

[Gadget Reboot @GadgetReboot]

Updated CR2032 to Varta battery replacement using low leakage schottky and LM66100 ideal diode.
Thanks to @PCBWayOfficial for the pcbs!
https://t.co/rZR1Xla3vQ
@SGirl0311

[Gadget Reboot @GadgetReboot]

Getting back to playing with Nixie Tubes using the HV5222 driver chip.
Thanks to @PCBWayOfficial for the pcbs!
https://t.co/95r9Doq1vg
@SGirl0311

[Gadget Reboot @GadgetReboot]

Thanks to @PCBWayOfficial for these pcbs, DTMF decoder running at 3.3v for easy ESP32 interfacing without a 5v level shifter
https://t.co/gNahYPls3a

[Gadget Reboot @GadgetReboot]

Echo effects are fun to play with!
Thanks to @PCBWayOfficial for the pcbs to make experimenting easier than having resistors shorting all over the breadboard.

https://t.co/FX8ai05How

@SGirl0311

[Gadget Reboot @GadgetReboot]

Breadboarding guitar effects is easy with a phone jack/buffer pcb from @PCBWayOfficial to get the guitar and amp plugged into the breadboard.

https://t.co/z2sL5OwLrf

@SGirl0311

[Gadget Reboot @GadgetReboot]

A 555 and a Binary Counter make strange sounds. PCBs thanks to @PCBWayOfficial
https://t.co/IAKSppn9Wk
@SGirl0311

[Gadget Reboot @GadgetReboot]

A breadboard friendly 555 oscillator pcb from @PCBWayOfficial has separate duty cycle and frequency adjustments
https://t.co/SoVBLv7cTi
@SGirl0311

[Gadget Reboot @GadgetReboot]

Guitar effects loop switcher with up to 16 channels! Thanks @PCBWayOfficial for providing pcbs!
https://t.co/RlsAKCqdhI
@SGirl0311