#Belzona 3131 (WG Membrane) is designed for all weather conditions, this cold-applied liquid coating offers long-term repair and protection to all types of roofs. For more information and key benefits of this Belzona solution you can find it here: https://t.co/82VFXf9EYU
US Coast Guard #boat rudders were pitted and experiencing #corrosion. All were coated with #Belzona 2141 for a long-lasting solution from future degradation.
These coal exhausters were lined with 1” thick ceramic wear tiles. Several broken tiles needed replacement. We removed all broken pieces of tile and troweled in #Belzona 1812 to replace the broken tiles. We met the customer's downtime requirements! How can we help you?
The protective covering for this petcoke barge crane's extension cords were severely damaged. They were rebuilt using #Belzona 2221 with mix boards, then poured in to encapsulate the damaged power cord to get the crane operational again. #industrialrepairs#Belzonait
Years of service had left the housing of this ship's bow thruster badly pitted. The housing was rebuilt with #Belzona 1311 Ceramic R-Metal and protected from future #erosion and #corrosion with Belzona 1321 Ceramic S-Metal.
A mining dragshaft with an interference fit 0.005-0.008” was severely worn due to bearing failure. A mold was made at a local machine shop, clamping on the seal surface using #Belzona® 1111 (Super Metal). Shaft repairs of any size can be molded in place, thus reducing downtime.
The main path for the current battery forklift was worn. Belzona® 4131 (Magma-Screed) and Belzona 5811 (Immersion Grade) were applied to rebuild 8" wide runways for the battery forklift and provide a protective coating for the Battery acid on the runways.
The #roof over a police training college was #leaking creating health and safety issues within the building. #Belzona® 4111 (Magma Quartz) and 3111 (Flexible Membrane) were applied to #repair and #waterproof it for a long-lasting solution.
This high-end luxury yacht's three gas turbine engine's jet tubes were suffering from #erosion and #cavitation. #Belzona® 1111 #Belzona 2141 and #Belzona® 1341 were applied for rebuilding and erosion/corrosion resistance. https://t.co/pwKRLY9n8j
These new heat exchanger units that are to be immersed in a salt water environment were coated with Belzona® 5891 (HT Immersion Grade) before their first use to extend the life of their service. For more info: https://t.co/TyDrMTpeZd
Spalled #concrete on the parapet side of the #roof of this gas and oil company allowed water ingress that resulted in flooding inside a boiler room. Spalled concrete was rebuilt with #Belzona® 4111 before weatherproofing the area with #Belzona® 3111 sealant system. #BelzonaIt
It was important that clamps, when being slid into position, did not damage the conductor cable on an offshore platform leg. #Belzona® 2141 was applied to prevent damage and was chosen as a cost effective alternative to the vulcanizing of rubber sheets to the clamps.
12" crude oil pipeline suffering from severe corrosion was preventing VJ coupling from sealing correctly. The corrosion resistant properties of #Belzona® 1151 allowed for a quick, hot work free repair to be completed.
This cooling tower drip pan was scaled and corroded. We mixed and applied a strip coat of #Belzona 5811 to seams, wall to wall corners and wall to floor interfaces, followed by a full base coat of Belzona 5811, for more info: https://t.co/RxXHHhpurA