InfiMech Official

Redefine what you can build, right from your workspace.
🪄Unlock your boundless creativity!🪄

[InfiMech Official @InfiMech]

🎟️ FREE Ticket Codes for Formnext 2026!

Heading to Frankfurt next week? Come visit InfiMech at Hall 12.0, Booth E22 (Nov 17–20) to see our multi-toolhead MX series printers live!

We’re giving away free visitor ticket codes—DM us on our official Facebook page right now to claim yours (while supplies last)! 👇

🔗 Facebook: https://t.co/0Js0mUG4DL

#InfiMech #Formnext2026 #3DPrinting #Frankfurt

[InfiMech Official @InfiMech]

InfiMech MX 6-Color First Layer Test: Flatness & Zero Light Leakage

A solid first layer is essential for multi-color 3D printing. Here is a test run of the 6-color first layer on the open-frame InfiMech MX to check bed leveling and seam transitions.

Key Observations:
• Uniform bed adhesion across the build plate
• Crisp transitions between colors with zero light leakage
• Reliable pickup and docking across all 6 independent toolheads

Back the InfiMech MX series on Kickstarter:
👉 https://t.co/3F1a1czwVN

#InfiMech #InfiMechMX #3DPrinting #MultiColor #ToolChanger #Kickstarter

[InfiMech Official @InfiMech]

InfiMech MX Pro 8-Color First Layer Test: Fully Enclosed Multi-Color Run

A clean first layer is critical before starting any multi-material or technical print. Here is the first-layer test running on the enclosed InfiMech MX Pro.

Test highlights:
• Flat extrusion across all 8 color blocks
• Sharp transitions between colors with zero color bleed
• Reliable tool changing inside the enclosed chamber

Learn more on our Kickstarter page:
https://t.co/3F1a1czwVN

#InfiMech #InfiMechMXPro #3DPrinting #ToolChanger #MultiColor #Kickstarter

[InfiMech Official @InfiMech]

🎉 InfiMech Live Stream Giveaway Winners Announcement! 🎁

A huge congratulations to all our lucky giveaway winners from today's live stream! Thank you so much for your incredible energy and support! 🚀

🏆 Grand Prize Winner (1x InfiMech MX 3D Printer)
@ brixynixy

🎁 Round 1 Winners (2 Spools of Filament each)
@ GSJester

@ k-nx

@ gukumatz94

@ desert_dog7728

@ RodgerLoughrey-b2y

🎁 Round 2 Winners (2 Spools of Filament each)
@ nikodb5471

@ vtxxx2002

@ 꾸릉꾸릉-l4s

@ Dadof3D

@ williammedina5762

@ Briarbb67 (Note: Verified directly from live stream playback)

📩 How to Claim Your Prize
Please email [email protected] with the following details:

Link to your YouTube channel (for username verification)

Full Name

Phone Number

Detailed Shipping Address (including Country/Region & Postal Code)

⚠️ Important Notice
Grand Prize Fulfillment: Please note that the InfiMech MX 3D printer will be shipped after the Kickstarter campaign ends and once all backer orders have been fulfilled.

Please contact us as soon as possible so we can verify your info and schedule fulfillment accordingly!

[InfiMech Official @InfiMech]

🚨 [UPDATE] New Live Stream Room! 🚨

Please note: We have updated our live stream link! Please join us at the new stream room via the updated link below.

Pre-Launch Live Stream + InfiMech MX & eSUN Giveaways!

We are just around the corner from our Kickstarter launch! Before we officially hit the button, we are hosting a special Pre-Launch Live Stream to hang out, answer all your hardware and firmware questions, and walk through the MX Series in real-time.

We will be dropping giveaways throughout the stream, so stick around and test your luck! 🎁

⏱️ Giveaway Schedule:
• 20 Mins In: 10x Spools of eSUN High-Performance Filament
• 40 Mins In: 10x Spools of eSUN High-Performance Filament (20 spools total!)
• 60 Mins In: 1x InfiMech MX 3D Printer (Grand Prize!)

🗓️ When to Join:
November 10th at 9:00 PM (Beijing Time / UTC+8)
🇺🇸 US East (EST): 8:00 AM (Nov 10)
🇺🇸 US West (PST): 5:00 AM (Nov 10)
🇪🇺 Central Europe (CET): 2:00 PM (Nov 10)
🇯🇵 Tokyo (JST): 10:00 PM (Nov 10)
🇦🇺 Sydney/Melbourne (AEDT): 12:00 AM Midnight (Nov 11)

📍 Watch Live on YouTube:
🔗 https://t.co/C0GGa1Ar0E

Set your alarms and see you all there! 🚀

#InfiMech #InfiMechMX #eSUN #3DPrinting #LiveStream #Giveaway #KickstarterLaunch

[InfiMech Official @InfiMech]

⏳ Just 1 Day to Go! Tomorrow is the Day! 🚀

📢 VIP Reservation Reopened by Popular Demand!
Due to overwhelming requests from new members joining our community, we have officially reopened VIP reservations! If you haven't secured your VIP perks yet, you can still grab your spot before the campaign goes live:
👉 VIP Reservation: https://t.co/HvbLzmqSeg

We are officially launching the InfiMech MX Series tomorrow on Kickstarter! Thank you all for your continuous support, feedback, and patience. Here are the launch times across major time zones to help you mark your calendar:

📅 Launch Time:
• Beijing (CST): Nov 10, 11:00 PM
• New York (EST): Nov 10, 10:00 AM
• Los Angeles (PST): Nov 10, 7:00 AM
• Paris/Berlin (CET): Nov 10, 4:00 PM
• Tokyo (JST): Nov 11, 12:00 AM (Midnight)
• Sydney/Melbourne (AEDT): Nov 11, 2:00 AM

🔗 Kickstarter Campaign Page:
https://t.co/i45IGnEveS

🔔 Friendly Reminder for VIP Members:
If you previously reserved a VIP spot, please make sure to keep an eye on your email inbox (and check your spam/junk folder just in case) so you don't miss our notifications on launch day!

See you all tomorrow! 🚀

#InfiMech #InfiMechMX #3DPrinting #Kickstarter #Countdown #MakerCommunity #3DPrinter

[InfiMech Official @InfiMech]

⏳ 2 Days to Go! The Countdown Continues! 🚀

We are officially 48 hours away from the Kickstarter launch of the InfiMech MX Series!

Thank you all for your continuous support, feedback, and patience as we prepare for launch day. Here are the launch times across major time zones to help you mark your calendar:

📅 Launch Time:
• Beijing (CST): Nov 10, 11:00 PM
• New York (EST): Nov 10, 10:00 AM
• Los Angeles (PST): Nov 10, 7:00 AM
• Paris/Berlin (CET): Nov 10, 4:00 PM
• Tokyo (JST): Nov 11, 12:00 AM (Midnight)
• Sydney/Melbourne (AEDT): Nov 11, 2:00 AM

🔗 Kickstarter Campaign Page:
https://t.co/i45IGnDXpk

🔔 Friendly Reminder for VIP Members:
If you previously reserved a VIP spot, please make sure to keep an eye on your email inbox (and check your spam/junk folder just in case) so you don't miss our notifications on launch day!

See you on launch day! 🚀

#InfiMech #InfiMechMX #3DPrinting #Kickstarter #Countdown #MakerCommunity #3DPrinter

[InfiMech Official @InfiMech]

📢 Important Update on VIP Test Emails!

A new round of VIP test emails has just been sent out! If you previously reserved a VIP spot for the InfiMech MX Series but still haven't received any email, please follow these steps:

1️⃣ Check Spam / Junk: Please take a quick look to see if the email was automatically filtered into your spam, junk, or promotions folder.

2️⃣ Subscribe on Official Website: Please make sure to subscribe on our official website using the exact same email address you used for your VIP reservation, and verify in your profile settings that email notifications are enabled (refer to the attached step-by-step guide).

3️⃣ Contact Us Directly: If you still haven't received anything, please reach out directly to our dedicated coordinator JOJO at:
👉 Email: [email protected]

Please include your reservation email address and name in your message. We will manually verify the list right away to ensure everything is set, so you will receive the email on launch day (Nov 10th)!

Thank you all for your patience and support!

#InfiMech #InfiMechMX #3DPrinting #Kickstarter #MakerCommunity

[InfiMech Official @InfiMech]

T-Minus 3 Days! 🛠️

The final countdown for the InfiMech MX Series has begun.

Whether you're looking for high-speed performance, clean multi-color management, or modular toolhead flexibility, the MX Series was built for makers who demand efficiency at every print.

🗓️ Launch Date: November 10th

Got questions before the drop? Drop them in the comments or join our Discord community!

Set a reminder & save the page now:

🔗 https://t.co/i45IGnEveS

#InfiMech #InfiMechMX #3DPrinting #KickstarterLaunch #AdditiveManufacturing #MakerMovement #3DP

[InfiMech Official @InfiMech]

⏳ 4 Days to Go! Kickstarter Launch Approaching!

We are officially 4 days away from launching the InfiMech MX series on Kickstarter!

Key highlights for launch day:
- 8 Independent Toolheads: Dedicated nozzle for each material, eliminating constant purging.
- High Efficiency: Up to 300 mm/s print speed, 800 mm/s travel speed, and 20,000 mm/s² acceleration.
- Multi-Material Printing: Easily combine rigid plastics, flexible TPU, and carbon fiber in a single print.

Super Early Bird tiers are strictly limited. Make sure to set your reminder for Day 1!

👉 Click "Notify me on launch" to secure your spot: https://t.co/i45IGnEveS

#Kickstarter #InfiMech #3DPrinting #MultiColorPrinting #8Toolheads #MakerCommunity #Countdown

[InfiMech Official @InfiMech]

Hey everyone!

We noticed that some users haven't received our VIP test email yet. No need to worry! This was just a delivery test. If you haven't seen it, please check the following:

1️⃣ Check your Spam/Junk folder: Please take a quick look to see if the test email landed there.

2️⃣ Subscribe on our official website: If you reserved a VIP spot, please use the same email address you used for your VIP reservation to subscribe on our official website. (We've attached an image showing the key steps to follow!)

📅 Note: We will be sending out another round of test emails over the next two days.

📩 If you still haven't received any email by now, please reach out directly to [email protected]. Our team will double-check your status and reply to you directly!

🎟️ Free Ticket Code for Formnext 2026 (Frankfurt)! Planning to visit Formnext 2026?

• Date: November 17–20, 2026
• Location: Messe Frankfurt (Halls 11 & 12)
• Our Booth: Hall 12.0, Booth E22

If you need a ticket code to join us at the exhibition, send us a direct message (DM) and we’ll get one to you!

Thank you all for your amazing support!

https://t.co/i45IGnEveS

#InfiMech #Formnext2026 #MakerCommunity #3DPrinting #Kickstarter #Countdown #3DPrinter

[InfiMech Official @InfiMech]

8 Toolheads, Unlimited Possibilities! Introducing the @esun3dfilament x InfiMech Official Co-Branded Partnership! 🚀🎨

We are thrilled to announce our official strategic partnership with InfiMech as they roll out their revolutionary 8-Toolhead MX Series!

At eSUN, we believe high-performance hardware deserves top-tier materials. To give global makers and engineers a seamless, plug-and-play printing experience, our engineering teams have worked hand-in-hand with InfiMech to fully optimize and integrate eSUN material profiles directly inside the InfiMech OrcaSlicer!

From everyday functional PLA to our premier aesthetic line—including Matte, Silk, Gradient, and Twinkle—you can now drive all 8 toolheads with flawless extrusion accuracy, rich color accuracy, and zero hassle.

What makes eSUN filaments the perfect match for InfiMech 8-toolhead printing?

• Maximize Efficiency, Eliminate Waste: InfiMech’s 8 independent extruders eliminate the massive purge waste typical of single-nozzle multi-color systems. Combined with eSUN’s tight tolerance control, every print runs cleaner and uses less material.
• Complete Creative Freedom: Load up 8 different eSUN colors or material types simultaneously. Craft multi-color showcase pieces or complex composite parts in a single, uninterrupted job.
• Pro-Grade Multi-Material Setup: Pair high-strength technical filaments like eSUN PA6-CF with dedicated breakaway support materials across separate toolheads for ultra-clean, complex mechanical components.

Get ready to experience 8-color printing optimized from spool to nozzle!

Explore the Campaign & Gear Up:
• InfiMech MX Series Kickstarter Campaign: https://t.co/wD3qJFuhkQ
• eSUN Official Website: https://t.co/uMDi2d8Me4
• eSUN Official Store (Shop Aesthetic Filaments): https://t.co/EUruNCHRad

#Kickstarter #3DPrinting #MultiColorPrinting #8Toolheads #eSUN #InfiMech #eSUNPLA #MakerCommunity #3DFilament

[InfiMech Official @InfiMech]

[Official Notice] InfiMech MX Series $5 VIP Reservation Closing Tomorrow

Dear community,

The $5 VIP early reservation window for the InfiMech MX Series will officially close tomorrow.

By reserving before the window closes, you will secure the following exclusive benefits:

• $50 Cash-Back: Pay a $5 reservation deposit and receive a $50 cash-back return to your original payment method.
• Priority First-Batch Delivery: Guaranteed placement in the very first global production and shipping schedule.
• 1-Year Extended Warranty: An extra year of warranty coverage added to the standard terms (extending 1 year to 2 years, or 2 years to 3 years where statutory 2-year warranty applies).

The reservation window closes tomorrow. Secure your spot on our official store here:
👉 https://t.co/HvbLzmqSeg
(Note: The $5 VIP deposit is 100% refundable at any time)

Thank you all for your tremendous support and enthusiasm!

The InfiMech Team

#InfiMech #InfiMechMX #InfiMechMXPRO #3DPrinting #ToolChanger #3DPrinter #OfficialNotice

[InfiMech Official @InfiMech]

Meet InfiMech at Formnext 2026 in Frankfurt! 🇩🇪

This November, we’re heading to Germany with our latest 3D printing lineup: the InfiMech MX, InfiMech MX Pro, alongside the InfiMech EX and EX APS Kit.

We invite you to drop by Hall 12.0, Booth E22 to see the machines running live prints, take a closer look at our toolhead and hardware setups, and talk tech with our team on-site.

🖨️ Featured Models:
• InfiMech MX
• InfiMech MX Pro
• InfiMech EX
• InfiMech EX APS Kit

🏛️ Venue: Messe Frankfurt, halls 11, 12 and Portalhaus

📍 Address: Ludwig-Erhard-Anlage 1, D-60327 Frankfurt am Main, Germany

🗓️ Dates & Opening Hours:
• Nov 17–19, 2026: 9:00 AM – 6:00 PM
• Nov 20, 2026: 9:00 AM – 4:00 PM

📌 Location: Hall 12.0, Booth E22

🎟️ Free Visitor Tickets:
Planning to visit? If you need a free visitor voucher code to attend Formnext 2026, feel free to send us a DM to claim yours!

Looking forward to connecting with engineers, makers, and partners from across the industry. See you in Frankfurt! 🖨️✨

#InfiMech #3DPrinting #Formnext #Formnext2026 #InfiMechMX #InfiMechMXPro #InfiMechEX #Frankfurt #AdditiveManufacturing

[InfiMech Official @InfiMech]

Printed a tiny birthday panda just for fun on the InfiMech MX 🐼🎂

Loaded up a few colors and let the multi-toolhead system do its thing while I was working. The colors came out clean and that little hat has no stringing.

Not a bad desk buddy for a random print run.

#InfiMech #InfiMechMX #3DPrinting #MultiColor3DPrinting #ToolChanger #3DPrinted

[InfiMech Official @InfiMech]

The InfiMech MX PRO at our Yiwu store! 🏬✨

Wrapped up the Yiwu Fair! We brought our 8-toolhead MX PRO over to the Yiwu store for a quick display. As you can see, all the side spools are loaded up—here is an up-close look at the setup.

#InfiMech #InfiMechMXPRO #3DPrinting #ToolChanger #3DPrinter #MultiColor3DPrinting #AdditiveManufacturing

[InfiMech Official @InfiMech]

And that is a wrap on the Yiwu Fair! 🎪🎉

A huge thank you to all the creators, partners, and international visitors who stopped by Booth C1C02-03. Over the past few days, we had so many inspiring conversations and received overwhelming support and thumbs up for our InfiMech MX Series! 🤖👍

Seeing our 8-toolhead system in action and hearing your excitement firsthand made this exhibition truly special.

Swipe through to see some of our favorite moments and wonderful guests from around the world! 📸🌍

👇 Early VIP reservations ($5 to save $50):
https://t.co/HvbLzmqSeg

#InfiMech #InfiMechMX #InfiMechMXPRO #YiwuFair #3DPrinting #ToolChanger #3DPrinter #TradeShow #WrapUp

[InfiMech Official @InfiMech]

The energy at the Yiwu Fair has been incredible! 🎪✨

Our booth (C1C02-03) has been packed with visitors and creators stopping by to explore our multi-toolhead 3D printing ecosystem.

All three machines are running non-stop demo prints on site:
• InfiMech MX PRO: 8-toolhead system printing complex multi-color models
• InfiMech MX: Smooth multi-color printing in action
• InfiMech EX with APS Kit: Continuous high-speed printing

If you are at the show, come feel the crowd and check out the live prints for yourself! 👀👋

👇 Early VIP reservations ($5 to save $50):
https://t.co/HvbLzmqSeg

#InfiMech #InfiMechMX #InfiMechMXPRO #YiwuFair #3DPrinting #ToolChanger #3DPrinter #TradeShow #AdditiveManufacturing

[InfiMech Official @InfiMech]

Hello from the Yiwu Fair! 🎪✨

Our InfiMech booth is all set up and ready to go! Come visit us to see our latest multi-toolhead 3D printing lineup in action 🤖🛠️

📍 Booth: C1C02-03
🌟 Featured Products:
• InfiMech MX Series (8-toolhead continuous printing)
• EX APS Kit 3D Printers

If you are attending the show, feel free to stop by our booth, chat with our team, and check out the live demo prints! Looking forward to seeing you here 👀👋

👇 Early VIP reservations ($5 to save $50):
https://t.co/HvbLzmqSeg

#InfiMech #InfiMechMX #InfiMechMXPRO #YiwuFair #3DPrinting #ToolChanger #3DPrinter #TradeShow #AdditiveManufacturing