Biomaterials & Biofabrication Laboratory

Our primary research focus revolves around 3D bioprinting scaffolds for tissue engineering. I am dedicated to development novel bioinks for 3D bioprinting.

[Biomaterials & Biofabrication Laboratory @JagodaLab]

🔬Published in Biofabrication: our 3D-bioprinted GrooveNeuroTube—PCL grid + GelMA/HAMA—supports neural migration up to 60 days, boosts DRG migration, and benefits from PEMF. Thanks to my co-authors! Funding: @EEANorwayGrants , @NCBR_pl, @NCN_PL
👉https://t.co/da1skmUO9U

[Biomaterials & Biofabrication Laboratory @JagodaLab]

🎉 Excited to share we’ve received @NCN_PL funding over (3.8M PLN) for a project on bioactive, drug-releasing stents with @abhi_indurkar at @czt_uam @UAM_Poznan, in a consortium with @IMC_Prague
#biomaterials #Volumetric3Dprinting #Endothelialization

[Center for Advanced Technologies (CAT) @czt_uam]

🧐 The recipient of the @NCN_PL OPUS 28+LAP/Weave grant, awarded in the July NCN funding round, is 𝗗𝗿. 𝗝𝗮𝗴𝗼𝗱𝗮 𝗟𝗶𝘁𝗼𝘄𝗰𝘇𝗲𝗻𝗸𝗼-𝗖𝘆𝗯𝘂𝗹𝘀𝗸𝗮!
👩🏻‍🔬 Dr. Litowczenko-Cybulska leads the Biomaterials & Biofabrication Laboratory @JagodaLab at @czt_uam.

📑The grant titled 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘉𝘪𝘰𝘤𝘰𝘮𝘱𝘢𝘵𝘪𝘣𝘭𝘦 𝘢𝘯𝘥 𝘉𝘪𝘰𝘢𝘤𝘵𝘪𝘷𝘦 𝘚𝘵𝘦𝘯𝘵𝘴 𝘧𝘰𝘳 𝘐𝘮𝘱𝘳𝘰𝘷𝘦𝘥 𝘌𝘯𝘥𝘰𝘵𝘩𝘦𝘭𝘪𝘢𝘭 𝘐𝘯𝘵𝘦𝘨𝘳𝘢𝘵𝘪𝘰𝘯 𝘪𝘯 𝘊𝘢𝘳𝘥𝘪𝘰𝘷𝘢𝘴𝘤𝘶𝘭𝘢𝘳 𝘈𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴 was developed in a consortium with @IMC_Prague.

[Biomaterials & Biofabrication Laboratory @JagodaLab]

🚨 I'm looking for a Postdoctoral Researcher in Biology to join my lab (Biomaterials & Biofabrication Lab) for a project on biomaterials for 3D bioprinting of vascularized tissue constructs.
🧪 Funded project: PulsBioInk
📍 Apply: https://t.co/bVqjvzjw92

[Center for Advanced Technologies (CAT) @czt_uam]

📍We’re at the European Science Fair at @targipoznanskie Poznań International Fair! 🇵🇱
📅 June 3–7
🔬 Represented by the Laboratory of Technological Processes & Laboratory of Biomaterials and Biofabrication (@JagodaLab)
Organized by @MNiSW
#Science #Innovation #PolishScience #CZT #MTP

[Center for Advanced Technologies (CAT) @czt_uam]

📣New publication in Biofabrication @IOPPublishing!
📲 https://t.co/9gEqZsYPtI

📑 Article 𝟥𝘋 𝘣𝘪𝘰𝘱𝘳𝘪𝘯𝘵𝘪𝘯𝘨 𝘰𝘧 𝘩𝘶𝘮𝘢𝘯 𝘪𝘗𝘚𝘊-𝘥𝘦𝘳𝘪𝘷𝘦𝘥 𝘤𝘢𝘳𝘥𝘪𝘢𝘤 𝘤𝘰𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘴 𝘸𝘪𝘵𝘩 𝘮𝘪𝘤𝘳𝘰𝘷𝘢𝘴𝘤𝘶𝘭𝘢𝘳 𝘯𝘦𝘵𝘸𝘰𝘳𝘬 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘧𝘰𝘳 𝘪𝘮𝘱𝘳𝘰𝘷𝘦𝘥 𝘨𝘳𝘢𝘧𝘵 𝘴𝘶𝘳𝘷𝘪𝘷𝘢𝘭 𝘪𝘯 𝘷𝘪𝘷𝘰 is Co-authored by Dr. Jagoda Litowczenko-Cybulska (@JagodaLab, @CZT_UAM)
with Prof. Angel Raya's group (Bellvitge Biomedical Research Institute, @idibell_cat).

👩🏻‍🔬 Dr. Jagoda Litowczenlko-Cybulska was involved in this project during her MSCA-IF at IDIBELL.

[Życie Uniwersyteckie @zuniwersyteckie]

JagodaLab z CZT z @UAM_Poznan ma pierwszą w kraju wolumetryczną biodrukarkę 3D – Tomolite od Readily3D!

Technologia umożliwia ultraszybkie tworzenie biologicznych struktur – przełom w inżynierii tkankowej.

Zakup sfinansowano z programu FENG (2021–2027) przez @FNP_org_pl.

[Center for Advanced Technologies (CAT) @czt_uam]

🇵🇱🧬 New milestone in biofabrication in Poland!

🖨️🧫 We are excited to share that the Biomaterials & Biofabrication laboratory (@JagodaLab) has been equipped with the 𝗳𝗶𝗿𝘀𝘁 𝘃𝗼𝗹𝘂𝗺𝗲𝘁𝗿𝗶𝗰 𝟯𝗗 𝗯𝗶𝗼𝗽𝗿𝗶𝗻𝘁𝗲𝗿 𝗶𝗻 𝗣𝗼𝗹𝗮𝗻𝗱 — 𝘁𝗵𝗲 𝗧𝗼𝗺𝗼𝗹𝗶𝘁𝗲 from @Readily3D in @czt_uam!

🦾🫀This breakthrough technology enables rapid and precise printing of complex biological structures, significantly opening new capabilities in tissue engineering and 3D bioprinting research.

💶🇪🇺 The purchase was made possible thanks to funding from the European Funds and is carried out within the project supported by the @FNP_org_pl, co-financed by the European Union under the European Funds for Smart Economy 2021–2027 (FENG).

#3DBioprinting #Tomolite #Readily3D #FENG #EUFunds #Biofabrication #TissueEngineering #volumetricbioprinting #Biomaterials #Readily3D #FNP

[Center for Advanced Technologies (CAT) @czt_uam]

🤩💪 Where else would you find such excellent attendance at seminars if not at @czt_uam!

🧐 Today, the first seminar of the year took place, during which we met the leaders of new research teams in our Center!

📣 Today's speakers were:
🧑🏻‍🔬 𝗗𝗿. 𝗵𝗮𝗯. 𝗔𝗱𝗿𝗶𝗮𝗻 𝗙𝗿𝗮𝗻𝗰𝘇𝘆𝗸, 𝗣𝗿𝗼𝗳. 𝗨𝗔𝗠: 𝘖𝘳𝘨𝘢𝘯𝘰𝘴𝘪𝘭𝘪𝘤𝘰𝘯-𝘣𝘢𝘴𝘦𝘥 𝘣𝘶𝘪𝘭𝘥𝘪𝘯𝘨 𝘣𝘭𝘰𝘤𝘬𝘴 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘤𝘰𝘯𝘵𝘳𝘰𝘭𝘭𝘦𝘥 𝘴𝘺𝘯𝘵𝘩𝘦𝘴𝘪𝘴 𝘰𝘧 𝘶𝘯𝘴𝘢𝘵𝘶𝘳𝘢𝘵𝘦𝘥 𝘰𝘳𝘨𝘢𝘯𝘪𝘤 𝘤𝘰𝘮𝘱𝘰𝘶𝘯𝘥𝘴 𝘢𝘯𝘥 𝘩𝘺𝘣𝘳𝘪𝘥 𝘱𝘰𝘭𝘺𝘮𝘦𝘳𝘴
👩🏻‍🔬 𝗗𝗿. 𝗝𝗮𝗴𝗼𝗱𝗮 𝗟𝗶𝘁𝗼𝘄𝗰𝘇𝗲𝗻𝗸𝗼-𝗖𝘆𝗯𝘂𝗹𝘀𝗸𝗮 @JagodaLab: 𝘋𝘦𝘷𝘦𝘭𝘰𝘱𝘮𝘦𝘯𝘵 𝘰𝘧 𝘛𝘪𝘴𝘴𝘶𝘦-𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘦𝘥 𝘝𝘢𝘴𝘤𝘶𝘭𝘢𝘳 𝘎𝘳𝘢𝘧𝘵𝘴 𝘵𝘩𝘳𝘰𝘶𝘨𝘩 𝟥𝘋 𝘉𝘪𝘰𝘱𝘳𝘪𝘯𝘵𝘪𝘯𝘨 𝘰𝘧 𝘊𝘦𝘭𝘭-𝘓𝘢𝘥𝘦𝘯 𝘏𝘺𝘥𝘳𝘰𝘨𝘦𝘭𝘴.

🥳 Congratulations to the speakers, and see you at the next seminar in a month!

[Biomaterials & Biofabrication Laboratory @JagodaLab]

We invite you to submit an abstract to our symposium during @ESB_2025 in Turin!

[Jacek Wychowaniec @JacekWychowani1]

‼️ NEW SYMPOSIUM ALERT @ESB_2025
👉Are you working on In situ #injectable #hydrogels and #musculoskeletal #regeneration? We announce our symposium on this theme at the @ESB_2025 in Turin next September! Submit you abstract here: https://t.co/9GF9UShWa7
@JeromeSohier @JagodaLab

[Jacek Wychowaniec @JacekWychowani1]

‼️ NEW SYMPOSIUM ALERT @ESB_2025
👉Are you working on In situ #injectable #hydrogels and #musculoskeletal #regeneration? We announce our symposium on this theme at the @ESB_2025 in Turin next September! Submit you abstract here: https://t.co/9GF9UShWa7
@JeromeSohier @JagodaLab

[Biomaterials & Biofabrication Laboratory @JagodaLab]

🚨2x Postdoc opportunities! 🚨

I’m looking for 2 postdocs to join my team at the Centre for Advanced Technologies, Adam Mickiewicz University! @czt_uam @UAM_Poznan

Volumetric 3D bioprinting & stem cells
⏳ Duration: 4 years and 3 years

https://t.co/SLNIrjQa7R

[Center for Advanced Technologies (CAT) @czt_uam]

👩🏻‍🔬 Aryna Shakun, a student from the Department of Biology @UAM_Poznan, working in @JagodaLab, has received funding from the ID UB UAM call no. 154: ADVANCEDBestStudentGRANT!
🧪 The "Fabrication and evaluation of bioengineered vascular graft" project obtained 5000 PLN funding.

[IMBB AMU Poznań @UAM_IBMiB]

Join us on Friday @UAM_IBMiB seminar for the talk of Jagoda Litowczenko-Cybulska @JagodaLab from @czt_uam to learn about IPS-derived Tissue-Engineered Cell-Laden Vascular Grafts! @czt_uam

[Jacek Wychowaniec @JacekWychowani1]

Excited to share our latest work published in @RSCAdvances ! 🎉 We explored how #proline substitution impacts the #self-assembly and nanostructure of β-sheet-forming #peptides: https://t.co/vnB4jxajZ1 @MartinSrejber @alinefmiller @MichalOtyepka @alberto_saiani

[Baltic Biomaterials Centre of Excellence @bbcentre_eu]

Congratulations to our PhD. Abhishek Indurkar on defending his PhD thesis "Amorphous Calcium Phosphates and Their Nanocomposites" on 28th of August! We thank the official reviewers Prof. S.Gaidukovs, Dr. A.Sizovs & Prof. J.Litowczenko-Cybulska @JagodaLab.
#Horizon2020 #Teaming

[Biomaterials & Biofabrication Laboratory @JagodaLab]

We're hiring a PhD student for the PulsBioInk Project at Center for Advanced Technologies, Adam Mickiewicz University! Join us to work on biomaterials, 3D bioprinting, and stem cells. https://t.co/iMT7r3lxTz https://t.co/bFHcXklSWV
@UAM_Poznan #3Dbioprinting #tissueengineering

[Biomaterials & Biofabrication Laboratory @JagodaLab]

After 10 years with the NanoBioMedical Centre (NBMC), I'm excited and proud to share that I'm starting a new position at the Center for Advanced Technologies! 🎉 I want to thank NBMC team. I'm really looking forward to the new chapter 🌟

https://t.co/axXnMODQIi

[Catalan Institute of Nanoscience & Nanotechnology @icn2nano]

🗣️ SEMINARS

You are invited to the seminar by Prof. Luis Emerson Coy Romero, from @CNBM_UAM. Hosted by @SalviSG, from the @Nanosfun_ICN2 Group.

📆 Friday 3rd May
⏰ 10 am
📍 ICN2 Seminar Room 
ℹ️ Registration at https://t.co/PmY7ziuGy2
🔃 RT appreciated!

#EnergyProduction