Jake Kerr

Owner/operator at Kerr Agriculture

[Jake Kerr @Jake__Kerr]

@nig_michael @ipaddockapps @AGCOcorp It’s a shear bolt. Knife drive shear bolt pictured below but same thing, just further up the Draper driveline.

[Jake Kerr @Jake__Kerr]

@flewitt777 @camo1977 @Deere_Salesman All suppliers looking at charter boats, but very expensive option on top of already expensive shipping

[Jake Kerr @Jake__Kerr]

@luckyimalad @BloodColin @Fendt_UKIreland @AGCOcorp I couldn’t agree more Ben, simply an oversight to be honest. Just need to be careful extending the flighting due to the related load this can put on the drives for the unloader, I would suggest to look at modifying the chute. Reach out if I can be of any help mate.

[Jake Kerr @Jake__Kerr]

@GribbleRC @tomcroser How much does a steinbauer set you back? $$

[Jake Kerr @Jake__Kerr]

@luckyimalad @JamesHeggaton @ipaddockapps Just to confirm, there are usually 3 hole positions for the rams. Most further back is “transport” and the others working, are you sure it’s all the way back? Also do you have the dividers bolted on in the middle of the auger?

[Butler Ag Equipment @butler_ag]

It's go time. 😎

[Traction Ag @TractionAg]

TRACTION AG FIELD & DRIVE DAY EXPERIENCE kicks off at 10am tomorrow! Stawell Rd next to Wimmera Lakes Caravan Park. With a lot of hard work from the team and our supporting suppliers the next two days will be guaranteed to be awesome! Hope to see you there!!

[Jake Kerr @Jake__Kerr]

@gregmoroney15 And Thanks for your support @gregmoroney15 @Moroneyprops 👍

[Jake Kerr @Jake__Kerr]

@luckyimalad @StrathavenFarm @AGCOcorp Nice! What are your settings? And can I ask what variety?

[Jake Kerr @Jake__Kerr]

@luckyimalad Nice job Ben 👍

[Jake Kerr @Jake__Kerr]

@JustinH26786511 Might have something kicking around.. let me know if you wanna have a look

[Jake Kerr @Jake__Kerr]

IDEAL from above

[Tony Foxwell @foxwell_87]

@Jake__Kerr @KirvanTyson @ramsey_bros

[Jake Kerr @Jake__Kerr]

@JustinH26786511 @YoungyJ80 Buy a Fendt @JustinH26786511

[Jake Kerr @Jake__Kerr]

@foxwell_87 @Moroneyprops @Tedthekelpie @AGCOcorp Can’t wait to see those LSW’s in action!

[Jake Kerr @Jake__Kerr]

IDEAL 9T with 60ft in NSW. @AGCOcorp

[Jake Kerr @Jake__Kerr]

@foxwell_87 @Moroneyprops @Tedthekelpie @AGCOcorp From my experience it generally is yeah, if over spreading on 40ft you might need to just adjust the vanes.

[Jake Kerr @Jake__Kerr]

@Tom_Julia @AGCOcorp 8.90 and 9.90 I believe, but full disclaimer I have no information on how they were going..

[Jake Kerr @Jake__Kerr]

@Moroneyprops @Tedthekelpie @AGCOcorp You could possibly put the tailboard up one or two holes and find it might spread further as well

[Jake Kerr @Jake__Kerr]

@clayallover @AGCOcorp Midwest fabrication

[Jake Kerr @Jake__Kerr]

@DohntLuke @AGCOcorp Nothing really concrete, I wasn’t there myself, not sure what the NH was doing but i believe IDEAL was somewhere circa 70t. Not 100% clear on all facts though.