Jim Dunbar

Product Marketing Manager, Phoenix Contact USA

[Jim Dunbar @JimDunbarPxC]

Time saving connection with our tool-free lever principle, long term stable contact force, easy push-in connection when the lever is closed, and can be color coded! The PLA 5 from Phoenix Contact. https://t.co/WgLtSkRGb7 Enter #0723.

[Jim Dunbar @JimDunbarPxC]

Anyone who ever worked with Dr. Bob will tell you he was one of the greatest. Learned a tremendous amount about connector design from him.

[ConnectorSupplier @ConnSupplier]

The #ElectronicsIndustry has lost one of its great #innovators and #educators, #connector expert Dr. Bob Mroczkowski https://t.co/SXaMYH0NSd, whose legacy includes the deep and enduring base of knowledge he shared with #interconnect professionals around the world.

[Duncan Nicol @DuncanNicol]

The new TDPT PCB power terminal block with push-in technology is now available via our sample service. Order your free sample today by visiting the product page at https://t.co/CaD89SMtNR

[Jim Dunbar @JimDunbarPxC]

Learn more at https://t.co/fKmNXDVQNy

[Phoenix Contact USA @PhoenixContact]

Phoenix Contact’s FINEPITCH series board-to-board connectors with 0.8 mm pitch achieve reliable high-speed data transmission up to 16 Gbps, allowing you to configure individual PCB orientations with various designs, stack heights, and numbers of positions. #connectors #data

[Jim Dunbar @JimDunbarPxC]

Learn more at https://t.co/fKmNXDEfW0

[Phoenix Contact USA @PhoenixContact]

Phoenix Contact’s FINEPITCH series board-to-board connectors with 0.8 mm pitch achieve reliable high-speed data transmission up to 16 Gbps, allowing you to configure individual PCB orientations with various designs, stack heights, and numbers of positions. #connectors #data

[Jim Dunbar @JimDunbarPxC]

No room for a header or pin strip on your PCB? No problem! Connect directly to your PCB with the ZEC line of connectors from @phoenixcontact. Available in 3.5, 5.0 and 7.5 mm centerline spacing, the ZEC connector also has a latch to secure it to the PCB once mated.

[Jim Dunbar @JimDunbarPxC]

With a cut-off frequency of more than 100 MHz, the IDC 0.3 connector from Phoenix Contact fulfills the requirements of CAT 5 in accordance with EN 50173. Best of all, no tools are needed to terminate the wire.

[Jim Dunbar @JimDunbarPxC]

An ultra-flat design height of just 5.4 mm and 2.54 centerline spacing make the @phoenixcontact FMC 0.5 plugs and MC 0.5 headers perfect for space saving applications.

[Jim Dunbar @JimDunbarPxC]

Make SMD LED’s visible on your front panel with our MC 1.5 fiber optics. They easily snap to the back of our headers.

[Jim Dunbar @JimDunbarPxC]

The PLW 16 panel feed-through from @phoenixcontact Levered spring connection outside the panel, push-in spring connection inside the device.

[Jim Dunbar @JimDunbarPxC]

No soldering iron needed! This baby can be wave soldered. https://t.co/xOmmY1UHVg

[Mikes Electric Stuff @mikelectricstuf]

That's not a terminal block....
THIS is a terminal block!
232A monster from @PhoenixContactU on 6L PCB. Must need a big-ass soldering iron.

[Jim Dunbar @JimDunbarPxC]

Terminal blocks with front conductor connection are perfect for flush mounting in devices. Easy to terminate the wire in the terminal block.

[Jim Dunbar @JimDunbarPxC]

Back on the @phoenixcontact Infomobile in Charlotte, NC.

[Jim Dunbar @JimDunbarPxC]

The SMC 1.5 connector from @phoenixcontact . An angled mating interface makes it easier to plug in the connector in restricted spaces.

[Jim Dunbar @JimDunbarPxC]

PSC 1,5 connectors from @phoenixcontact. An excellent combination of a rugged plug-in terminal block in a shielded D-SUB configuration.

[Jim Dunbar @JimDunbarPxC]

KGG cable housings from @phoenixcontact provide strain relief for the cable and make plugging/unplugging connections much easier.

[Jim Dunbar @JimDunbarPxC]

The SPTA 1 from @phoenixcontact. A 10 mm constructional depth means more connection points in a tighter space for your applications.

[DigiKey @digikey]

This Digi-Key Daily previews @PhoenixContact's #SDDC 1.5 double-row #PCBconnectors https://t.co/1GpQVNXKFq

[Jim Dunbar @JimDunbarPxC]

Prevent connector mating errors with our easy to install coding pins. Install them yourself, or we can do it for you @PhoenixContact

[Jim Dunbar @JimDunbarPxC]

Pluggable terminal blocks on a DIN rail from @PhoenixContact. Check them out at https://t.co/0ad4LBYwq6, webcodes #0787 and #0788.