You can buy each piece of the SIP mask valve separately and in bulk, and save a fair bit. Especially important if you use your SIP a lot or need to supply a covid safer event. More links in the 🧵
Advice for existing Zimi users trying Ziga for the first time:
1. If you have previously used a specific size of Zimi mask, you can continue using the same size for Ziga. Alternatively, you may wish to try other sizes to see which one fits you best.
2. You can start by purchasing individual masks to test the fit; if you require additional frames, you may opt for a boxed set.
3. Zimi masks consist of a filter element and a frame, whereas Ziga masks consist of a filter element, elastic straps, and a frame. Please remember to purchase the elastic straps! Both the elastic straps and the frames are reusable and washable; the number of times they can be reused depends on your individual usage habits.
4. Model correspondence: 9541 = B95-M, 8210 = B95-L, 9233 = A100-M, and ZM100 = A100-L. Products with an "F" suffix consist solely of the filter element and do not include elastic straps (these must be purchased separately and attached by the user). For example, A100F refers to the filter element for the A100 model; to use it, you will need a corresponding frame and two elastic straps.
5. Filter elements are no longer categorized by how they are worn (headloop or earloop); instead, they are distinguished only by color (white or black) and whether or not they include an exhalation valve.
I filed my opening brief in Gjovik v. Apple at the Ninth Circuit (No. 26-4716). The appeal asks the court to reverse a judgment that ended my whistleblower retaliation case without a trial.
One of Apple's stated reasons for firing me is that I posted pictures of my own face, taken by an Apple app on a phone I carried at home, protesting Apple's AI data collection and surveillance of employees. If an employer's "confidential" label controls, the right to talk about working conditions means little.
Apple made me gravely ill in 2020 from illegal toxic waste dumping from a chip fab. My office also sat on a Superfund site. I was put on leave the day before I planned to photograph cracks in the floor, and the cracks were sealed before the EPA inspected. A jury should decide what that means.
California asks only whether protected activity was a contributing factor in a firing. The district court asked instead whether Apple's reasons were a pretext, and for other claims required proof that retaliation was the only reason.
I was also fired hours after asking for written questions the day before sworn testimony to a federal agency (NLRB). No one should have to choose between a job and an accurate record.
California OSHA is proposing a new law to lower the exposure limit for Trichloroethylene (TCE) at work. TCE is a dangerous carcinogen & nervous system depressant. Attend the 12/17 hearing, submit comments, & show your support!
https://t.co/a3f5TFjuRw
This is roughly what the filter looks like after one month of use. I estimate it can be used for another 15–30 days. The average outdoor PM2.5 where I am is 40 μg/m³. If you’re in an environment with 10 μg/m³ or cleaner, it should last about 6 months or even longer.
This should re-assure Zimi users that the batch of filter media suspected of being subpar is still standards compliant and protective.
But the issue wasn't a phantom. It is real. There was an actual, if small, reduction in filtration from the usual performance of that filter media.
"these batches demonstrated filtration efficiencies of 97.44%, 98.31%, 98.55%, and 98.08%, respectively....these results show a slight decrease; nevertheless, they remain fully compliant with the KN95 standard."
Thanks to @zhouliang_mask for following up on this even though he left Zimi many months ago to start Ziga mask. And thanks to the community fit testers who noticed the deviation in PortaCount results and wanted to make sure Zimi's were still providing the protection people count on them for.
It's interesting and useful that PortaCount fit testing was sensitive enough to detect the slight decrease in filtration efficiency, but also a reminder that PortaCount testing in N99 mode won't necessarily give an OSHA passing fit factor of 100 even for NIOSH compliant N95s or GB2626-2019 compliant KN95 masks.
N95s and KN95s are allowed to have up to 5% filter penetration at 85 liters per minute of airflow. Even with a perfect face seal, 5% filter penetration would show as a "failing" fit test score in N99 mode. N99 mode can't tell the difference between allowed filter penetration and a face seal leak.
In practice, you shouldn't get full 5% filter penetration in an N99 mode fit test of an N95 fit test since, A) most N95 filter media has less than 5% filter penetration and B) you don't breathe at 85 liters per minute of airflow.
But even 1.5% filter penetration would be a failing fit test in N99 mode since only a 1% face seal leak or less is allwed. This is why N95 mode was developed for fit testing of N95s, to detect just face seal leakage. And why the Zimis could test lower than usual in N99 mode PortaCount testing, but still be compliant with the KN95 filtration standard.
Community fit testers generally use N99 mode on N95s for two reasons:
• Affordable surplus PortaCounts only have N99 mode, so we use what is available and keep the limitations of N99 mode in mind when evaluating fit test scores for series 95 masks.
•Because we want to test overall protection - how many particles get into a mask - not just meet minimum OSHA face seal leak requrements.
Some people would like fewer particles in their masks, fewer than allowed under the N95 standard, irrespective of how they get into the mask. N99 mode fit testing allows us to rate respiratory protection on a continuum from least protective to most protective.
N95 mode is a great tool for N95/KN95 fit testing and community fit testers do use it when appropriate and they have the equipment available to do it.
In the US, workplace fit testers pretty much always use N95 mode for N95s because their job is to test for face seal leaks, and only face seal leaks. OSHA requires all masks to be NIOSH approved, which thus are assumed to filter well. And N95 mode is designed to test just for face seal leaks and not filter penetration.
📢 Update from Invivyd on VYD2311 progress, via Q3 2026 results: DECLARATION data is still expected imminently; discussions are ongoing with FDA re: accelerated approval pathway.
As a basic refresher:
1. VYD2321 is a monoclonal antibody administered via intramuscular injection, which is designed as a vaccine alternative for the broad population. The efficacy expectation is that it will provide ~70-90% protection against symptomatic COVID for 3 months, and 50+% at the 1-year mark.
2. Resulting from a spring/summer with relatively low COVID transmission, Invivyd has previously announced plans to get VYD2311 onto the market via an “accelerated approval” pathway. This means that FDA approval will be based on immunogenicity and safety data alone, and they will continue to collect COVID events post-approval to ultimately prove efficacy.
Anyway, onto today’s update:
• Interestingly, Invivyd has unveiled today that the nonproprietary (generic) name for VYD2311 will be ibramvibart.
• DECLARATION Phase 3 clinical trial data for VYD2311 (ibramvibart) - serum virus neutralizing antibody titers, pharmacokinetics, immunogenicity, and safety - are still expected imminently.
• Dialogue is ongoing between Invivyd and the FDA 1) to refine details on the Accelerated Approval approach for VYD2311, and 2) to expand the accelerated regulatory approach and enable rapid development of future Invivyd monoclonal antibodies, including Invivyd’s measles antibody candidate.
• Investments are being made in commercial preparedness for VYD2311; Invivyd plans to host a Medical and Commercial Investor Event in the first half of 2027 to describe commercial plans and early expressions of institutional demand.
Today, I visited a NIOSH-certified mask manufacturing facility to further investigate the correlation between the N99 "fit scores" I personally measured and the actual filtration efficiency of the masks. Using a TSI 8130 tester, the facility’s technicians evaluated four batches of Zimi masks—the same ones that had yielded poor fit scores (ranging from 31 to 66) during my previous testing. When subjected to a salt aerosol loading test (based on the GB2626-2019 KN95 standard), these batches demonstrated filtration efficiencies of 97.44%, 98.31%, 98.55%, and 98.08%, respectively. As an engineer, while I typically state that my KN95 masks offer 98% filtration efficiency—a figure that often exceeds 99% in actual use—these results show a slight decrease; nevertheless, they remain fully compliant with the KN95 standard. This matter is now settled, and any further steps will be handled by Zimi. I have been under immense pressure recently and have faced criticism from various quarters. To those who have attacked me: I hope you never purchase Ziga masks. To those who choose Ziga masks, I guarantee that you will have an optimal wearing experience.
For anyone who wears Zimi and owns a Portacount (or Bitrex + nebuliser) it might be a good idea to re-test your masks if you wear them for high risk indoor.
9541V-03 headloops getting 40-80 for static tests (expected 300+).
The 9541V-03 in the Excel is an older batch from 2025.
👆This Chinese engineer covers your respiratory health — with the best-value air purifier that's detachable and portable.
This Chinese engineer covers your respiratory health — with the KN95 respirator that's supremely comfortable to wear. @zhouliang_mask
This Chinese engineer covers your respiratory health — with far-UVC. @NukitToBeSure
OFFICIAL PUBLIC STATEMENT
Mr. Zhou Liang completely withdrew all shares from ZIMI Mask in June 2026.
ZIMI Mask is operated by an entirely independent company.
It has no shareholding, no operation, no quality control, and no technical connection with ZIGA Mask and the brand “Zhou Liang’s Mask”.
1. Zhou Liang’s team no longer participates in the production, inspection, or quality supervision of ZIMI Mask.
2. No further technical updates, product upgrades, or iteration will be provided for ZIMI Mask.
3. All quality issues, after-sales disputes, legal liabilities, and operational risks related to ZIMI Mask shall be borne solely by the independent operator of ZIMI.
ZIGA Mask is the officially upgraded and independently operated third-generation brand of Zhou Liang.
We hear you, and we take your feedback to heart. 🖤
We recently used AI tools solely for creating product mockup images. However, we see the growing backlash against AI and completely understand the concerns of artists and creators.
As of today, we are officially banning ALL AI tools across our brand. No AI imagery. We are going back to real photography and human creativity. Thank you for keeping us accountable.#zimiair
I know asking for reviews can be a bit annoying—but honest feedback really helps people understand our products from a real user’s perspective. If you’re willing, I’d be very grateful if you could leave a review on our website or on Amazon, depending on where you purchased it. If you can upload photos, it would be great, and a video is even better! Your review would help our business and also help others who are still deciding which air purifier to choose. Thank you!