June Lee

Architect and Designer

[June Lee @JuneLee_Design]

Froze a splash and asked it to be a building.
Irregular cells and droplets cluster into a porous shelter. It reads as liquid from one angle and eroded stone from the next. That tension is the whole project.
Full video ↓
https://t.co/N7YRJr7LFM
#parametricdesign

[June Lee @JuneLee_Design]

Porosity Gradient: a solar farm in the Mojave with a market, mushroom farms, wine cellars and a seed bank underneath it. 🟧
One square grid governs every surface.
Same geometry. Opposite purpose.
#architecture #agrivoltaic

[June Lee @JuneLee_Design]

Curves, drawn with straight lines.
A parametric shell pavilion that stands through tension alone.
Rhino + Grasshopper + Blender
▶ https://t.co/QbWJ2ixzjg
#parametricdesign #generativedesign

[June Lee @JuneLee_Design]

Stacked nothing but straight trusses — and got a curved surface.

A saddle shell that stands on tension alone. Shift the angle and it reads as an entirely different form. That's the whole appeal.

Full video ↓
https://t.co/QbWJ2ixzjg

#parametricdesign

[June Lee @JuneLee_Design]

Gyre: a pendant that hangs in balance and turns with the room. 🌀
Brass + walnut + frosted glass, spiraled around one warm light — cantilevered and counter‑weighted so it settles level on its own, then drifts with the air.
Lighting and kinetic sculpture in a single hang.

[June Lee @JuneLee_Design]

Watch a flat surface turn into the Pie Pavilion 🪐
Built entirely in Rhino + Grasshopper, then rendered in Blender Cycles. A few parameters control the whole curved form.
Full step-by-step tutorial on YouTube
#parametricarchitecture #rhinograsshopper #grasshopper3d

[June Lee @JuneLee_Design]

Full Rhino + Grasshopper tutorial: https://t.co/dm9VQMm9J3
#parametricdesign #grasshopper3d

[June Lee @JuneLee_Design]

Designed this parametric pavilion entirely in Rhino + Grasshopper, then rendered it in Blender Cycles.
A small set of parameters controls the whole curved geometry. Breakdown 🧵👇

[June Lee @JuneLee_Design]

All 20 spaces visualized with Flux AI.
Every prompt engineered for straight verticals, photorealistic materials.

Full project → @junelee_design on Instagram

Waste is not the problem.
Waste is the concept. 🌿⚡

#AIarchitecture #fluxai #parametricdesign

[June Lee @JuneLee_Design]

Most buildings throw away their waste heat.

What if you built the entire program around it instead?

THERMOPOLIS — a data center + tropical greenhouse, one building 🧵

#architecture #sustainabledesign

[June Lee @JuneLee_Design]

Inside THERMOPOLIS:

— Meet in front of a wall of banana palms
— Read in a library where books share shelves with moss
— Work beneath a tropical plant ceiling
— Eat lunch under a canopy of palms

Every room. Same energy loop.

[June Lee @JuneLee_Design]

Spike Pavilion Rhino Grasshopper #rhinoceros #grasshopper #3dmodeling #parametricdesign

[June Lee @JuneLee_Design]

Spike Pavilion Rhino Grasshopper Tutorial
Pavilion Design using Rhino Grasshopper
Blender3D Cycle Render
Tutorial Video: https://t.co/qPC8CimBlv
#arch #architecture #design #designinspiration #3dmodeling #parametricarchitecture #rendering #3drendering #parametricdesign #blender

[June Lee @JuneLee_Design]

Loop Pavilion Blender3D Geometry Nodes(#Shorts) #blender #blender3d #3dmodeling

[June Lee @JuneLee_Design]

Loop Pavilion Blender3D Geometry Nodes Tutorial
Pavilion Design using Blender3D Geometry Nodes
Blender3D Cycle Render
Tutorial Video: https://t.co/W8EpF8dxgz
#arch #architecture #design #designinspiration #3dmodeling #parametricarchitecture #nextarch #archisource #rendering

[June Lee @JuneLee_Design]

Circuit Pavilion Rhino Grasshopper #rhinoceros #grasshopper #3dmodeling #parametricdesign

[June Lee @JuneLee_Design]

Circuit Pavilion Rhino Grasshopper Tutorial
Pavilion Design using Rhino Grasshopper
Blender3D Cycle Render
Tutorial Video: https://t.co/V39j8NQDUj
#arch #architecture #design #designinspiration #3dmodeling #parametricarchitecture #rendering #3drendering #parametricdesign

[June Lee @JuneLee_Design]

Spiral Frame Pavilion Blender3D Geometry Nodes(#Shorts) #blender #blender3d #3dmodeling