Kaisertech

Kaisertech - UK Suppliers of Electronic Production Tools & Equipment.

Enquiries: [email protected]

[Kaisertech @KaisertechUK]

It's finally here!!
Take a watch of our Kaisertech brand film over at - https://t.co/3cV75vyL1l

[Kaisertech @KaisertechUK]

Ideal for all soldering processes requiring high productivity, the ALE station includes JBC's most efficient soldering system with many key features:

⭐️Increased tip life
🌡️Heat control
🔌Automatic temperature reach

[Kaisertech @KaisertechUK]

Are you experiencing solder splashing on your PCB’s? Discover JBC ALE Automatic Feed Soldering Station 👇

[Kaisertech @KaisertechUK]

By perforating the solder wire down to the flux core as it’s fed through, the ALE station allows for better flux flow and outgassing., avoiding splashing in the process.

[Kaisertech @KaisertechUK]

You can find out more about the JBC range of tip cleaners here!
https://t.co/JG2g22dTB2

[Kaisertech @KaisertechUK]

Keen to improve your soldering processes?
💡JBC Automatic Tip Cleaners are your solution💡

A thread 👇

[Kaisertech @KaisertechUK]

👉Easy To Adapt & Replace
The locking mechanism on these brushes make it simple to replace when required. There are 2 types of brushes you can pick up for your system - metal brushes and fibre brushes.

[Kaisertech @KaisertechUK]

If you have exhausted these methods to no avail, it is likely that your cartridge is beyond repair. ❌

In this instance your best bet is to replace the soldering tip.

Find out more information on removing oxidisation from soldering cartridges here:

https://t.co/wUp7wNRkTl

[Kaisertech @KaisertechUK]

How To Remove Mild Oxidisation…

A Thread👇

[Kaisertech @KaisertechUK]

... Keep the tip pressed to the tinner for several seconds then use a dry cleaning method to clean the tip.

➞ Repeat steps 2 & 3 until oxidisation has been completely removed. Once this occurs, and the tip shows good wetting capabilities, the process was successful...

[Kaisertech @KaisertechUK]

No problem, we are happy to help :) Would be great to see the video!

[Andrew Hutchings @LinuxJedi]

Thanks to @LemaruX for pointing out the @sdgelectronics video on this (and @KaisertechUK for stocking it). This tripod connects to my JBC vacuum pump and gently pulls up an SMD IC whilst I apply heat, the metal square directs the heat to desolder it.
I need to make a video on it.