MQTS

[MQTS @MQ_Training]

We have partnered with @titanranch to give you the opportunity to become a @HaminaWireless Certified Network Architect in one of the most unique venues in the world! Book your place to ensure your spot on this not to be missed course.
https://t.co/gN3J4EpyBj

[MQTS @MQ_Training]

We’re excited to announce that the 𝗛𝗮𝗺𝗶𝗻𝗮 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗡𝗲𝘁𝘄𝗼𝗿𝗸 𝗔𝗿𝗰𝗵𝗶𝘁𝗲𝗰𝘁 (𝗛𝗖𝗡𝗔) class is coming to 𝗟𝗼𝗻𝗱𝗼𝗻, 𝗨𝗞 𝘁𝗵𝗶𝘀 𝗢𝗰𝘁𝗼𝗯𝗲𝗿 for an in-person training experience.

📅 𝗿𝗲𝗴𝗶𝘀𝘁𝗲𝗿 𝗻𝗼𝘄:
https://t.co/HTpdd1Xswd

[MQTS @MQ_Training]

Video 30: Monitoring WLAN operations. Would you trust AI to make automatic adjustments to your WLAN configuration? #LearnWiFiDesign https://t.co/fjAQJYyt6C

[MQTS @MQ_Training]

Video 29: Optimising a WLAN. What is the most common problem you see when assessing WLANs? #LearnWiFiDesign https://t.co/eyxJ4y5WOQ

[MQTS @MQ_Training]

Video 28: Validation. How often do you perform application and roaming testing as part of a RF validation survey? #LearnWiFiDesign https://t.co/2xlJaQ1asp

[MQTS @MQ_Training]

Video 27: Diagnose Phase. Do you perform regular WLAN health checks for your designs or only when problems occur? #LearnWiFiDesign https://t.co/T46D63kcIP

[MQTS @MQ_Training]

Video 26: RRM settings. When would you favour a static chanel/power plan over RRM? #LearnWiFiDesign https://t.co/6LxIUmnjPT

[MQTS @MQ_Training]

Video 25: Frequency band selection. What type of WLANs do you deploy on 2.4GHz? #LearnWiFiDesign https://t.co/CSYb2k6LI0

[MQTS @MQ_Training]

Video 24: Data rate configuration. What is your go to MBR for WLAN deployments? #LearnWiFiDesign https://t.co/GcOgsoPhr7

[MQTS @MQ_Training]

Video 23: SSIDs per AP radio. What is the largest number of SSIDs you have seen assigned to a single radio? #LearnWiFiDesign https://t.co/5BYvfUEKI5

[MQTS @MQ_Training]

Video 24: Access point and antenna placement. When have you had to use a creative mounting solution? #LearnWiFiDesign https://t.co/AOLG15JUov

[MQTS @MQ_Training]

Video 23: Deployment phase. As a WLAN designer, involved do you get in the deployment? #LearnWiFiDesign https://t.co/u1wF6lNkDT

[MQTS @MQ_Training]

Video 22: Designing for Wi-Fi 6E. What channel widths are you deploying in 6GHz? https://t.co/pV0fZYkGap

[MQTS @MQ_Training]

Video 21: Designing for high density environments. What do you think the threshold is for an environment to qualify as high density? #LearnWiFiDesign https://t.co/BnpYZGt1cp

[MQTS @MQ_Training]

Video 20: Designing for warehouses. What challenging warehouse environments have you designed Wi-Fi for? # LearnWifiDesign https://t.co/56Ncy96D2r

[MQTS @MQ_Training]

Video 19: Designing with external antennas. Do you have a favourite external Wi-Fi antenna? Let us know below! #LearnWiFiDesign https://t.co/44V4FYEwn3

[MQTS @MQ_Training]

Video 18: Designing for hotels and dorms. Do you have a favourite hospitality AP? #LearnWiFiDesign https://t.co/Fpno18Qtd6

[MQTS @MQ_Training]

Video 17: Designing for a capacity. What metric do you use to design WLAN capacity? Devices per radio? Throughput per radio? Or something else? #LearnWiFiDesign https://t.co/PhVfTgOZVt

[MQTS @MQ_Training]

Video 16: SNR and co-channel contention. Do you include SNR and co-channel contention heat maps in your customer reports? Or do they just add confusion? #LearnWiFiDesign https://t.co/CQ6jnCsQvD

[MQTS @MQ_Training]

Video 15: Designing secondary coverage. Roaming does not require 100% of secondary coverage but what percentage do you design for? #LearnWiFiDesign https://t.co/KHR00i2jf1

[MQTS @MQ_Training]

Video 14: Designing primary coverage. What primary coverage threshold do you design to and how do you determine it? #LearnWiFiDesign https://t.co/kexMYVGoOV