Adam Davis

its all for the love of farming and burning diesel. and drag racing when it’s not “broken”

[Adam Davis @McPuc]

@HARDI_Australia Commander6500 2020/21 model with “activ air” single line and dual nozzle bodies. Having a run (4-5 this summer) of the nozzle bodies failing. Any tips/solutions to prevent this from happening further???

[Adam Davis @McPuc]

Dunstan bin owners or anyone who can shed some light on why the auger will no longer fold out and seal tight. Looks to me like the dogs on ends of augers are lining up fine????

[Adam Davis @McPuc]

@BullPlainBoy Tim surely u aren’t suggesting I put my feet on my nice carpet floor 😂

[Adam Davis @McPuc]

Yesssss this has been the talk of our harvest with the new magnum on the bin. Have bent both keys…. Switched it off mid flight….. not idea

[Adam Smith @lingy_smith]

@CaseIHAus @CNHIndustrial can I offer some product improvement advice. Please stop putting the key on the side of the steering wheel like it’s a car. It’s too close to getting broke off or knocked. Be practical please.

[Adam Davis @McPuc]

@AndrewNixon22 @ServiceNSW And never go around or just after lunch in case they have been held up on their lunch break

[Adam Davis @McPuc]

FOR SALE : First cut Lucerne pasture hay. Baled Nov21. Average bale weight 530kg. $120/tonne on farm. Freight options available. Message or call Adam 0428178737

[Adam Davis @McPuc]

@teasy64 @nullaboo48 We love our hustler zero turn. Def built heavy enough to handle the farm yard but still cuts well enough to do the house lawn (not a bowling green) and leaves cuttings fine with mulcher kit installed on deck

[Adam Davis @McPuc]

@Jldickins Is it a few different products or just different people with the one main offender product causing it?

[Adam Davis @McPuc]

WANTED TO BUY : Comb trailer to take 30-40 foot fronts. Preferably bogey bogey with turntable.

[Adam Davis @McPuc]

@Techgrow2 @GpsVic I’ll see if I can find some drone footage I had. I am not going to share photos until it’s had it’s repaint as the surface rust I find a bit embarrassing

[Adam Davis @McPuc]

With lots of muddy urea spreading and spraying ahead hopefully. What are you using as your preferred brand/brew of foam gun applicated truck wash for cleaning up AG Machinery? Trying a few out but nothing so far that has really stood head and shoulders above the pack

[Adam Davis @McPuc]

@Antfarm81 120w up top 80w down the bottom. Roughly 8.5Amp draw up top and 5.5Amp down borrow @14V. The amp draw is the rating to be concerned with but most LED light bars that u would use on a buggy are between 5-25Amp draw @ 13-14v.

[Adam Davis @McPuc]

@Antfarm81 Run two on the front of this Polaris along with lots of led strip lighting and a 35L fridge with the stereo going. Have swapped battery out for a lithium one but stock alternator

[Adam Davis @McPuc]

@GpsVic @Techgrow2 Jeremy u know it will come from u when the time comes. Have u got a savy price on one that is ISOBUS with load cells. U have my number

[Adam Davis @McPuc]

@Techgrow2 Yep. Have only ever added ladder and freshened up the spinner drive transmission last season. About to get a repaint and another 600 or 900L of extensions put into it before paint. And convert from PTO to hydraulic drive

[Adam Davis @McPuc]

@cropmad @ajkahl “Loom tape” similar to that used in automotive OEM for long runs. Doesn’t hold out moisture but doesn’t hold it in either. Best defence is don’t buy cheap wire cause it has cheap insulation coating. I also fill the back of a lot of plugs with potting compound

[Adam Davis @McPuc]

@cropmad @ajkahl For any spots applicable I use a heat shrink that was sold to me as “marine use” (good sales terms). It’s 4 to 1 shrink ratio and has lots of a glue/softish resin in it. Sets firm but not hard and oozes out the ends. Needs a good heat source to work it.

[Adam Davis @McPuc]

@cropmad Not near my toolbox so this is a grab from google images but you will get the idea

[Adam Davis @McPuc]

@cropmad In a standard trailer plug I usually go for non insulated wire terminal pins crimped with the propper tool on the ends of the wires. A good quality end is not rock hard and those locking screws really bite well into them