Micro Metals

[Micro Metals @MicroMetals]

"In the Truest sense, freedom cannot be bestowed; It must be won" Happy Independence Day...

Visit Us at : https://t.co/SSvkavF45o

#MicroMetals #OilAndGas #stainlesssteel #IndependenceDay #India #IndependenceDayWishes #Freedom

[Micro Metals @MicroMetals]

A panel nut is very thin nut with a relatively large hole commonly used to mount threaded electrical switches.

Visit Us at : https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #OilAndGas #stainlesssteel #carbonsteel #alloysteel #TypesOfNuts #Nuts #PanelNuts

[Micro Metals @MicroMetals]

A Square Nut is a four-sided nut. Compared to standard hex nuts, square nuts have a greater surface in contact with the part being fastened, & therefore provide greater resistance to loosening.

#MicroMetals #TypesOfFasteners #TypesOfNuts #Nuts #SquareNuts

[Micro Metals @MicroMetals]

A T-nut, T nut, or tee nut (also known as a blind nut, which can however also refer to a rivet nut or an insert nut) is a type of nut used to fasten a wood.

Visit Us at : https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #TypesOfNuts #Nuts #Tnuts #TeeNuts #BlindNuts

[Micro Metals @MicroMetals]

A wingnut or wing nut is a type of nut with two large metal "wings", one on each side, so it can be easily tightened and loosened by hand without tools.

Visit Us at: https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #carbonsteel #alloysteel #TypesOfNuts #Nuts #WingNuts

[Micro Metals @MicroMetals]

A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together.

Visit Us at: https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #carbonsteel #alloysteel #TypesOfNuts #Nuts

[Micro Metals @MicroMetals]

This Bolt is used for connecting the Bindings to decks. The Countersunk head allows the bolt to sit flush under the board.

Visit Us at: https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #alloysteel #TypesOfBolts #Bolts #CountersunkBolts

[Micro Metals @MicroMetals]

An eye bolt is a bolt with a loop at one end. They are used to firmly attach a securing eye to a structure, so that ropes or cables may then be tied to it.

Visit Us at: https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #alloysteel #TypesOfBolts #Bolts #EyeBolts

[Micro Metals @MicroMetals]

Hex bolts are used to fasten two or more parts together to form an assembly either because it cannot be manufactured as a single part or to allow for maintenance & repair disassembly.

https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #TypesOfBolts #Bolts #HexBolts

[Micro Metals @MicroMetals]

Hex Head bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction & repair.

Visit Us at : https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #TypesOfBolts #Bolts #HexHeadBolts

[Micro Metals @MicroMetals]

Also commonly known as lag bolts, lag screws are some of the toughest fasteners. These extremely sturdy fasteners are usually used to connect heavy lumber or other heavy materials that are bearing an intense load.

#MicroMetals #TypesOfFasteners #TypesOfBolts #Bolts #LegBolts

[Micro Metals @MicroMetals]

Square head bolts & screws are fasteners with a round threaded shank & a square head that allows for more tightening than a hex head.

Visit Us at: https://t.co/SSvkavF45o

#MicroMetals #TypesOfFasteners #OilAndGas #stainlesssteel #TypesOfBolts #Bolts #SquareHeadBolts

[Micro Metals @MicroMetals]

A #bolt is a form of threaded fastener with an external male thread. Bolts are closely related to, and often confused with, screws.

Visit Us at: https://t.co/SSvkavnsGO

#Flanges #MicroMetals #TypesOfFasteners #OilAndGas #stainlesssteel #carbonsteel #alloysteel.

[Micro Metals @MicroMetals]

This is also a continuous or phonographic spiral groove, but it differs from the stock finish in that the groove typically is generated using a 90-deg tool which creates a V geometry with 45° angled serration.

Visit Us at: https://t.co/SSvkavnsGO
#Flanges #MicroMetals #OilAndGas

[Micro Metals @MicroMetals]

The Ring Type Joint #Flanges are typically used in high pressure (Class 600 and higher rating) and/or high-temperature services above 800°F (427°C). They have grooves cut into their faces which #steel ring gaskets.
Visit Us at: https://t.co/SSvkavnsGO
#MicroMetals #OilAndGas

[Micro Metals @MicroMetals]

The purpose of a RF flange is to concentrate more pressure on a smaller gasket area and thereby increase the pressure containment capability of the joint. Diameter and height are in ASME B16.5 defined, by pressure class and diameter. #Flanges #MicroMetals #UsagOfFlanges

[Micro Metals @MicroMetals]

Flat Faced #Flanges are used in low pressure and temperature environments such as water treatment or pump suction flanges. Flat face flanges are usually common when the piping or piping components are brittle such as plastic,fiberglass or cast iron. #FlatFacedFlanges #FlangesType

[Micro Metals @MicroMetals]

Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.
#MicroMetals #PEDCertified #Flanges #Fasteners #RoundBars #Fittings #AboutFlanges #UsageOfWeldNeckFlanges #WeldNeckFlanges

[Micro Metals @MicroMetals]

Lap Joint Flanges have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a "Lap Joint Stub End".
#MicroMetals #PEDCertified #Flanges #AboutFlanges #LapJointFlanges #UsageOfLapJointFlanges

[Micro Metals @MicroMetals]

Socket-weld pipe flanges are typically used on smaller sizes of high-pressure pipes. These pipe flanges are attached by inserting the pipe into the socket end & applying fillet weld around the top.
#MicroMetals #PEDCertified #Flanges #SocketWeldFlanges #UsageSocketWeldFlanges