NetviewCCTV.co.uk

Netview CCTV Ltd is an Authorised Hikvision Wholesaler
Website：

[NetviewCCTV.co.uk @NetviewCCTV]

Four questions decide it: PoE load? uplink saturated? any device over 1Gbps? VLANs routing on the switch? Full guide + in-stock models, same-day dispatch from Leicester: https://t.co/NIP3YUDqv0

[NetviewCCTV.co.uk @NetviewCCTV]

Which Reyee switch for a CCTV job? A quick thread on the RG-NBS managed range for installers. ↓ https://t.co/NIP3YUDqv0

[NetviewCCTV.co.uk @NetviewCCTV]

Tier 3 — RG-NBS5100/5200. Layer 3 with static routing, for sites where VLANs must route to each other on the switch. Most CCTV-only jobs don't need this.

[NetviewCCTV.co.uk @NetviewCCTV]

Tier 2 — RG-NBS3200. Same L2 management, but 10G SFP+ uplinks. Choose it when high-megapixel cameras would saturate a Gigabit link to the recorder.

[NetviewCCTV.co.uk @NetviewCCTV]

Tier 1 — RG-NBS3100. Layer 2 cloud-managed, VLANs + IGMP snooping, 370W PoE+ and 56 Gbps on the 24-port model. The workhorse for most 8–48 camera sites.

[NetviewCCTV.co.uk @NetviewCCTV]

Spec any AX PRO job in 6 steps: zones → wired legacy? → detection → arming → signalling → life-safety. Same-day dispatch. Trade desk 01163 800 838.

[NetviewCCTV.co.uk @NetviewCCTV]

The Hikvision AX PRO wireless alarm, explained for installers 🧵 Grade 2 • two-way 868MHz • runs from the same Hik-Connect app as your cameras. Full 2026 guide ↓ https://t.co/N7YMySxaTS

[NetviewCCTV.co.uk @NetviewCCTV]

Detectors: standard PIR, dual-tech, ceiling 360°, PIR+glass, break-glass, external tri-tech anti-mask — plus smoke, CO, water-leak and panic. All supervised over Tri-X.

[NetviewCCTV.co.uk @NetviewCCTV]

Pick by zone count, signalling path and whether the site has wired devices worth keeping. The M2H lets you re-land legacy loops instead of re-cabling.

[NetviewCCTV.co.uk @NetviewCCTV]

Three hubs to choose from:

DS-PWA64-L-WE — 64 zones, entry
DS-PWA96-M-WE — 96 zones + 3G/4G
DS-PWA96-M2H-WE — 96 zones + 16 wired inputs (hybrid retrofit)

[NetviewCCTV.co.uk @NetviewCCTV]

HiLook full colour, decoded for installers 🧵 ColorVu vs Smart Hybrid Light vs LiveGuard — and IP vs coax. New guide 👇

[NetviewCCTV.co.uk @NetviewCCTV]

Full guide + reference BoMs. One PO, same-day UK dispatch. Trade desk 01163 800 838 → https://t.co/EzsSCBth4j

[NetviewCCTV.co.uk @NetviewCCTV]

Martyn's Law makes a lockdown & communication plan a legal expectation for UK venues from ~April 2027. One system covers it. A UK installer's guide

[NetviewCCTV.co.uk @NetviewCCTV]

Six steps: survey → classify tier → design → install → commission zones → train & drill. Netgenium speakers + LED, Hikvision panic/LiveGuard/TalkVu/NVR

[NetviewCCTV.co.uk @NetviewCCTV]

Schools are always Standard tier, even at 800+. The lockdown/evacuation/invacuation plan is the operative document — and a networked PA + LED display makes it deliverable

[NetviewCCTV.co.uk @NetviewCCTV]

The design is four layers on one PoE network: Trigger → Alert → Response → Record. Each layer maps to in-stock kit.

[NetviewCCTV.co.uk @NetviewCCTV]

Two tiers: Standard (200–799) needs public-protection procedures — evacuation, invacuation, lockdown, communication. Enhanced (800+) adds CCTV, controlled access, monitoring

[NetviewCCTV.co.uk @NetviewCCTV]

Stocked at Netview in Leicester for same-day UK trade dispatch.
Trade desk: 01163 800 838
Full installer guide ↓ 6/6 https://t.co/5v08PLIUIn

[NetviewCCTV.co.uk @NetviewCCTV]

The UK installer guide for 2026: when it beats a wireless retrofit, EOL wiring rules, the 1 A power budget, and three reference BoMs.
🧵 1/6 https://t.co/5v08PLIUIn

[NetviewCCTV.co.uk @NetviewCCTV]

Six-step commissioning order on a Hub 2 Plus retrofit:

1. Push hub to OS Malevich 2.13+
2. Mount MultiTransmitter beside the legacy panel
3. QR-code pair from the Ajax PRO app
4. Terminate zones (1.5 mm² alarm cable)
5. Set R, 2R, 3R resistors per zone
6. Walk + ARC handover

[NetviewCCTV.co.uk @NetviewCCTV]

Compatibility gate: Hub Plus, Hub 2 (2G/4G), Hub 2 Plus (2G/4G), Superior Hub Hybrid (2G/4G) — all on OS Malevich 2.13+. Older Hub (gen 1) and ocBridge Plus / uartBridge are out.
2EOL + 3EOL require MultiTransmitter firmware 2.13.0+. 4/6