OBDLink

Makers of premium OBD2 scan tools

[OBDLink @OBDlink]

📢 Introducing Carbyte, the first all-in-one system that combines an AFM/DFM disabler, Start/Stop disabler, and OBDLink scan tool in one device.
Get your Carbyte now! https://t.co/6MzIS1qkIa

#Kickstarter #automotive #ThursdayThoughts
#obd #scantool

[OBDLink @OBDlink]

@TalentsourcerAU

If you have not already done so, you can connect via the OBDLink app and go to Diagnostics > Reports > PID Snapshot to see what OBD-II PIDs are supported by your vehicle.

[OBDLink @OBDlink]

@TalentsourcerAU

I am sorry for the tardiness of this response, and I thank you for your patience thus far.

If your vehicle supports DPF parameters via OBD-II, you should be able to read DPF Soot reading and other diesel-related PIDs.

[OBDLink @OBDlink]

@abwabwabwabwabw

What other third-party app are you referring to? Is it Carista?

The included OBDLink app only connects to OBD-II(Emissions-related) data by default. To read OEM data like TPMS parameters, you would need to install one of the OBDLink enhanced add-ons.

[OBDLink @OBDlink]

Our final savings of the year!
- EX
- CX
- LX

#happyholidays #obdlink #obdlinklx #obdlinkex #obdlinkcx @ Phoenix, Arizona https://t.co/tbQxmCYip6

[OBDLink @OBDlink]

@lololanas MX+ o EX serían nuestras herramientas de escaneo recomendadas, pero como la aplicación OBDLink incluida se conecta a los datos OBD-II (relacionados con las emisiones), le recomendamos que también use el software FORScan..

[OBDLink @OBDlink]

@AnkerMake Who did your video? We love it! 😍

[OBDLink @OBDlink]

@i0s3n

We would recommend contacting the app developer of the Gretio app to confirm support for your vehicle and your requested features.

[OBDLink @OBDlink]

@i0s3n

Thank you for your patience thus far.

Unfortunately, we do not yet have a timeframe of when the included OBDLink app will support OEM DTC reading for GM vehicles made after 2019. However, you may be able to use a third-party app like Gretio to accomplish this.

[OBDLink @OBDlink]

@mmore77777 @RouteBetter Can confirm, we are running a limited release and hope to be fully in stock soon.

[OBDLink @OBDlink]

@GurdSan

Thank you for reaching out to us. I will take a look into these previously opened tickets.

[OBDLink @OBDlink]

@mmore77777 OBDLink CX is expected to be available again at the end of this month!

[OBDLink @OBDlink]

@JamesCerulo

We are happy to hear that you are loving EX with the Torque app so far. If you do have any specific questions in the future, we would be happy to help.

[OBDLink @OBDlink]

@LesTurn79006842

Yes, MX+ can be used with any OBD-II Compliant vehicle to read and clear OBD-II DTCs and read OBD-II Live parameters, including your 2020 Volvo V60.

[OBDLink @OBDlink]

@big_boss954 "The only thing I have planned is the upgraded cluster to the premium and upgrading my radio to the 8.4 radio".

Because this would be considered OEM configuration, it is likely you will not be able to accomplish this without a Security Gateway Bypass.

[OBDLink @OBDlink]

@big_boss954 Starting from Model Year 2018 (Fiat 500L from MY2017) FCA installs the Security Gateway Module (SGW) which blocks access to diagnostics for the third-party software. Because of this, we recommend visiting AlfaOBD's website for additional recommendations.

[OBDLink @OBDlink]

@djxpiro With the free GM add-on, you will also be able to read and clear the manufacturer-specific codes for your 2005 Chevrolet Colorado.

[OBDLink @OBDlink]

@djxpiro Yes, MX+ and the included OBDLink app will read and clear generic OBD codes for all OBD-II compliant vehicles, including your 2005 Chevy Colorado.

[OBDLink @OBDlink]

@dohbee

We are sorry to hear that you are still getting bothered by this particular message. Our app developer as been updating our privacy policy to be compliant with Android's policy changes and this seems to be a result of this change.