@scott0960b@dubyadirt Hey Scott. The laser etching is actually groves in the plastic. If they have dirt or oil in the groves they will fade. Grab a can of brake cleaner and spray and rub them. The words should come back. If not…. Send us a picture and we’ll look after you.
Check out these vibrant wraps!😎 Easy to use and easy to identify, that’s how we make hooking up easy!
Get our + and - packs here👉🏻https://t.co/hG6lQao9Kk
@JarrodAmery@kingswaywelding Most times that will help bring the writing back. Unfortunately, if your wraps are exposed to an abrasive environment for long periods of time without being cleaned, the laser print can be completely filed down.
@JarrodAmery@kingswaywelding Due to the nature of this product and the job is has to do, the lasered grooves will get filled with dirt, oil, grease, etc. We recommend to our customers to use a brake cleaner or a solvent to rub on the wraps to try to clean out those grooves.
We vote you “GO” to our website and “SLOW DOWN” to take a look but don’t forget to “STOP” at our Hose Boss page to check these beauties out! 🤩🚦
https://t.co/TuQ7etoXCS
@Pness03 Thanks Peter. We appreciate your business and thanks for supporting our small company. We try to make an extra effort as we love our customers.