Pisces Printing

This is a Youtube channel that revolves around 3d printing and some electronics - The ongoing project is a 3D Printed Speaker.

[Pisces Printing @PiscesPrinting]

I turned a 3D print into solid aluminum using a tiny bit of 🔥fire and sand. Check it out here:👉Turning 3D Printed Parts into METAL with Molten Aluminum Sand Casting
https://t.co/jZ59njESzO

Big thanks to @zoey46128830 and @PCBWayOfficial for sponsoring the video

[Pisces Printing @PiscesPrinting]

The last 3D-printed jig for the table project was simple yet precise, used to create the edge bezel from 3" strap before final welding.

Combining prints with metalwork has greatly improved efficiency.
#DIY #welding #3DPrinting

[Pisces Printing @PiscesPrinting]

Each jig was printed in PA12-CF with tight tolerances from CAD —
The goal: align tube angles perfectly to weld the hourglass legs for my table.

Honestly expected them to warp or wear after the first few cuts.
But they stayed dimensionally perfect through all 12. 😎 #3dprint win

[Pisces Printing @PiscesPrinting]

🔥 Didn’t think this would work…
I 3D printed PA12-CF jigs to guide a plasma cutter for 3” tubing-
12 cuts per side — and they never melted.

Borrowing precision from printers to shape steel.
This mix of digital + physical making never gets old.

#3Dprinting #Makers #Fabrication

[Pisces Printing @PiscesPrinting]

🧩 Built a dining table top using resin and laser-cut steel hexagons — but the twist? Every hex was aligned with 3D-printed jigs.

Borrowing tolerances from printers to build furniture feels like cheating, but I can’t get enough of it.

#3Dprinting #Makers #ResinArt #DIY

[Pisces Printing @PiscesPrinting]

Print your next desk lamp: Bluetooth control, diffused PETG, full build files.
Watch here 👉
https://t.co/3fB5YyaYW3
Big thanks to sponsors @PCBWayOfficial and @zoey46128830 🙌 #Makers #3DPrinting #SmartHome

[Pisces Printing @PiscesPrinting]

Check out my most recent video featuring 7 functional automotive prints for my turbo dune buggy including a SLS aluminum printed intake!! Special thanks to @PCBWayOfficial and @zoey46128830 for sponsoring the video as well!!

Check it out here
👇
https://t.co/Vvp5J0OFuy

[Pisces Printing @PiscesPrinting]

In this video 🎥 I teamed up with Johnathan from The Next Layer to create a #3dprint #multiboard compatible bookshelf speaker🔈 Also Huge thanks 🙏 to @PCBWayOfficial and @zoey46128830 for supporting the channel so that I can do these videos! Watch here👉https://t.co/QNYatLdS5j

[Pisces Printing @PiscesPrinting]

Huge thanks to @zoey46128830 @PCBWayOfficial for backing the most recent project: I 3D printed an AI created speaker enclosure - how does it sound? Find out by watching the video covering the whole project -
https://t.co/Fsttv95v4L

[Pisces Printing @PiscesPrinting]

I present the lightest speaker I’ve ever designed- designed with both 3D printing and vacuum forming technology- it has a moving mass of sub 5g. The constant improvement is thanks to sponsors @PCBWayOfficial & @SGirl0311

Video👉|
https://t.co/7IChjwtXgQ

[Pisces Printing @PiscesPrinting]

Custom automated coil winder - PCB curtesy of @SGirl0311 & @PCBWayOfficial . It’s amazing working with them on projects like this. Watch the full build here👉 Arduino Controlled Coil Winder V3.0 - The Most Precise Winder To Date
https://t.co/2r9rwDNTcW

[Pisces Printing @PiscesPrinting]

First video of 2025, and a huge thanks to @SGirl0311 and @PCBWayOfficial for the continued support! Check out the latest creation and milestone of v20 in my printed speaker series. Fully Printed Speaker V20 - Project Wave Point
https://t.co/igDzq0pqRu

[Pisces Printing @PiscesPrinting]

Can’t thank @PCBWayOfficial & @SGirl0311 for supporting the channel this year. Check out the awesome holiday swag they sent along with this months video featuring a 3D printed speaker & passive radiator built with vacuum formed parts👉
https://t.co/lfjOcvMIUc #diy

[Pisces Printing @PiscesPrinting]

Version 18 of my 3D printed speaker is complete, it wouldn’t be possible without @SGirl0311 & @PCBWayOfficial support on the channel.
Video here👉

https://t.co/V5U8scZhSE

🔊Files will be available shortly!

[Pisces Printing @PiscesPrinting]

Thanks goes out to @PCBWayOfficial & @SGirl0311 for sponsoring my most recent creation- a 3D printed tweeter! Watch the video here 👉 Fully 3D Printed Tweeter v1 - Project MonoTone
https://t.co/7SOJUHpUqx

[Pisces Printing @PiscesPrinting]

Huge thanks to @SGirl0311 & @PCBWayOfficial for supplying this CNC copper grounding block, it was the last piece to my wiring puzzle on my air-cooled VW turbo build #speeduino #turbo #vw #buggy #wiring

[Pisces Printing @PiscesPrinting]

@PCBWayOfficial & @SGirl0311 are absolutely amazing for sponsoring another video on the channel- take a look at v17s new carbon fiber facelift-making it the most powerful speaker in my lineup! 👉👉
https://t.co/PLDrmpggsv

[Pisces Printing @PiscesPrinting]

Huge thanks to @SGirl0311 & @PCBWayOfficial for sponsoring the most recent speaker build - they provided a bunch of MJF nylon parts this time! Video here👉 Fully 3D Printed Speaker v17
https://t.co/tuCCR9iFd2

[Pisces Printing @PiscesPrinting]

Huge thanks to @PCBWayOfficial & @SGirl0311 for providing the PCBs for my DIY loadcell handbrake. It’s powered with a teensy 4.0, check out the video for a full look at the project.

DIY Sim Rig E-Brake and Bass Shaker Install
https://t.co/NxrCk2X224

[Pisces Printing @PiscesPrinting]

Thanks @SGirl0311 & @PCBWayOfficial for being a continued sponsor of they channel, they make these videos possible👉Almost* Fully 3D Printed Speaker v16.1 - Now with Less Printed Parts!
https://t.co/qNaOr5wfMV