Pnoxi

Open Source Electronics for the maker community by @emsit_sk       If you like something from my work, you can support me through

[Tindie Maker Marketplace @tindie]

Tindie Sellers: Map Your Worldwide Sales! #TindieBlog #tindietwittermap https://t.co/T4Btx5sCPw

[Pnoxi @Pnoxi]

https://t.co/lnqvwMyjVc

[Pnoxi @Pnoxi]

Prototype of thermally protected surge protection with LED signaling of MOV status.
Combines MOV + GDT + TVS.

[Chris Burton @burtyb]

Couple of AVR-ISP Pogo Pin Adapters (design from @Pnoxi but I messed up their logo) for my box of programmers in @oshpark After Dark.

[Jiří Praus @jipraus]

I was afraid of upgrading my T-962, but with @emsit_sk's kit, it was a piece of cake! Well packed, well documented, well done. Thank you, keep up the great work!
Now the oven works much better.

🛒https://t.co/EdAiWmHK45

[Josef Adamčík @josefadamcik]

AVR-ISP Pogo pin adapter from @Pnoxi arrived yesterday and even with a gift. Ordered through @tindie. Thank you @emsit_sk It's very nice little gadget, looking forward to using it.

[🅴🅼🆂🅸🆃 @emsit_sk]

@dronecz @KutilDomaci @Pnoxi Zatial nie, je to prototyp.
Finalna verzia bude zlozitejsia (4 vrstvove PCB, meranie svetla, VOC...)
Len som chcel aby mal @KutilDomaci radost z nejakej uzitocnej stavebnice😁

[Marty @KutilDomaci]

OK, hotovo a funkční! 👌🏼
Problém byl v tom, že program padal na inicializaci pinu BUILTIN_LED na OUTPUT, zjevně na ESP12 dělá něco divného. Blynk taky funkční! 😍
Tak jsem se zase naučil něco nového. Díky @Pnoxi @emsit_sk 😎👍🏼

[Marty @KutilDomaci]

Tak @pnoxi wifi teploměr osazen, leč zatím neoživen. Doufám, že jsem v šuplíku nevyhrabal zrovna nějakou odsmahnutou ESP12... 🤪
Po zapojení napájení totiž ani neblikne 🤔

[Pnoxi @Pnoxi]

New gifts for my @tindie customers🙂

[Tindie Maker Marketplace @tindie]

Back in Stock! T-962/T-962A reflow oven - Controller Upgrade https://t.co/HhvSObHR7h

[Jiří Praus @jipraus]

This is the result when you design PCB with love - nice, clean and simple design. I love your boards @emsit_sk!

[Pnoxi @Pnoxi]

T-962/T-962A reflow oven - Controller Upgrade - Back in stock!

https://t.co/eF965cRpFc
https://t.co/hdcGdzgFaM

[Pnoxi @Pnoxi]

10/20mA Linear CC LED Driver:
https://t.co/58FxlY7FD2
https://t.co/CQoABsPUYP
https://t.co/CfprQSue78

20mA Step-Up CC LED Driver "Joule Thief":
https://t.co/uOqhQWB6fF
https://t.co/vDlUl7xDdG
https://t.co/HV8YzRgfmX

[Pnoxi @Pnoxi]

I added @ADSKEAGLE design files to @github for my @tindie Small size (5x10mm) constant current source for LEDs!
PCBs are available for free at #MakerFairePrague (@PragueMF), stand 126 @chiptronCZ

[Pnoxi @Pnoxi]

@sej7278 @OpenRetroWorks @PCBWayOfficial @JLCPCB @kicad_pcb Yes, it is difficult to solder, even for me 🥺
Did you made it with PCBWay? I see some differences there, such as white line for pin 1 🧐
And I'm happy it works. Blynk board looks great 😋

[Pnoxi @Pnoxi]

The first batch of AVR-ISP Pogo pin adapters is ready to be added to @tindie!
Pure PCB will be available for free at Prague Maker Faire @PragueMF, @chiptronCZ stand.

PCB produced by @JLCPCB

[Simon John @sej7278]

@Pnoxi @OpenRetroWorks Got mine back from @PCBWayOfficial today, pogo's are a bit of a cow to solder and keep aligned but they work great! Used it to program my Blink board from @JLCPCB I made using @kicad_pcb

[Pnoxi @Pnoxi]

Upgrade to antistatic packaging 😋

[Pnoxi @Pnoxi]

10% discount for all on my @tindie store, for one week (ending 05.06.2019)
Hurry up!

https://t.co/5AWuBKfZo3

[Pnoxi @Pnoxi]

New storage system for my @tindie products 😋

https://t.co/5AWuBKfZo3